Introduction

The example application shows how to use mxchip-wifi-at-driver modules at mbed and was tested on NUCLEO_F412ZG.

Until now,mxchip-wifi-at-driver module can used for EMW3031 and EMW3080B.

How to use

• Burn the latest AT firmware to EMW3080B or EMW3031
• Get the example application
• Program your board

Burn the latest AT firmware to EMW3080B or EMW3031!

To use mxchip-wifi-at-driver module,Firstly, you should get the latest AT firmware from http://developer.mico.io/at, then download it to EMW3080B or EMW3031.

Get the example application!

From the command line, import the example:

mbed import https://github.com/MXCHIP/mbed-wifi-at-example
cd mbed-wifi-at-example

Program your board(with NUCLEO_F412ZG)

1.Connect your mbed device to the compoter over USB.

2.You will find a removable device USB Mass Storage named NODE_F412ZG

3.Send mbed-wifi-at-example.bin into the device

4.Reboot your deivce,the application will excute automatically

Troubleshooting

1. Make sure mbed-cli is working correctly and its version is >1.0.0

mbed --version

 If not, you can update it easily:

pip install mbed-cli --upgrade

2. If using Keil MDK, make sure you have a license installed. MDK-Lite has a 32KB restriction on code size.