Master backup #1
Draft
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
added 5 commits
February 22, 2018 11:49
amazor
pushed a commit
that referenced
this pull request
Feb 19, 2024
…bors over iBGP Session (sonic-net#16705) What I did: Enable Sending BGP Community over internal neighbors over iBGP Session Microsoft ADO: 25268695 Why I did: Without this change BGP community send by e-BGP Peers are not carry-forward to other e-BGP peers. str2-xxxx-lc1-2# show bgp ipv6 20c0:a801::/64 BGP routing table entry for 20c0:a801::/64, version 52141 Paths: (1 available, best #1, table default) Not advertised to any peer 65000 65500 2603:10e2:400::6 from 2603:10e2:400::6 (3.3.3.6) Origin IGP, localpref 100, valid, internal, best (First path received) Last update: Tue Sep 26 16:08:26 2023 str2-xxxx-lc1-2# show ip bgp 192.168.35.128/25 BGP routing table entry for 192.168.35.128/25, version 52688 Paths: (1 available, best #1, table default) Not advertised to any peer 65000 65502 3.3.3.6 from 3.3.3.6 (3.3.3.6) Origin IGP, localpref 100, valid, internal, best (First path received) Last update: Tue Sep 26 15:45:51 2023 After the change str2-xxxx-lc2-2(config)# router bgp 65100 str2-xxxx-lc2-2(config-router)# address-family ipv4 str2-xxxx-lc2-2(config-router-af)# neighbor INTERNAL_PEER_V4 send-community str2-xxxx-lc2-2(config-router-af)# exit str2-xxxx-lc2-2(config-router)# address-family ipv6 str2-xxxx-lc2-2(config-router-af)# neighbor INTERNAL_PEER_V6 send-community str2-xxxx-lc1-2# show bgp ipv6 20c0:a801::/64 BGP routing table entry for 20c0:a801::/64, version 52400 Paths: (1 available, best #1, table default) Not advertised to any peer 65000 65500 2603:10e2:400::6 from 2603:10e2:400::6 (3.3.3.6) Origin IGP, localpref 100, valid, internal, best (First path received) **Community: 1111:1111** Last update: Tue Sep 26 16:10:19 2023 str2-xxxx-lc1-2# show ip bgp 192.168.35.128/25 BGP routing table entry for 192.168.35.128/25, version 52947 Paths: (1 available, best #1, table default) Not advertised to any peer 65000 65502 3.3.3.6 from 3.3.3.6 (3.3.3.6) Origin IGP, localpref 100, valid, internal, best (First path received) **Community: 1111:1111** Last update: Tue Sep 26 16:10:09 2023 Signed-off-by: Abhishek Dosi <[email protected]>
amazor
pushed a commit
that referenced
this pull request
Apr 30, 2024
…bors over iBGP Session (sonic-net#16705) What I did: Enable Sending BGP Community over internal neighbors over iBGP Session Microsoft ADO: 25268695 Why I did: Without this change BGP community send by e-BGP Peers are not carry-forward to other e-BGP peers. str2-xxxx-lc1-2# show bgp ipv6 20c0:a801::/64 BGP routing table entry for 20c0:a801::/64, version 52141 Paths: (1 available, best #1, table default) Not advertised to any peer 65000 65500 2603:10e2:400::6 from 2603:10e2:400::6 (3.3.3.6) Origin IGP, localpref 100, valid, internal, best (First path received) Last update: Tue Sep 26 16:08:26 2023 str2-xxxx-lc1-2# show ip bgp 192.168.35.128/25 BGP routing table entry for 192.168.35.128/25, version 52688 Paths: (1 available, best #1, table default) Not advertised to any peer 65000 65502 3.3.3.6 from 3.3.3.6 (3.3.3.6) Origin IGP, localpref 100, valid, internal, best (First path received) Last update: Tue Sep 26 15:45:51 2023 After the change str2-xxxx-lc2-2(config)# router bgp 65100 str2-xxxx-lc2-2(config-router)# address-family ipv4 str2-xxxx-lc2-2(config-router-af)# neighbor INTERNAL_PEER_V4 send-community str2-xxxx-lc2-2(config-router-af)# exit str2-xxxx-lc2-2(config-router)# address-family ipv6 str2-xxxx-lc2-2(config-router-af)# neighbor INTERNAL_PEER_V6 send-community str2-xxxx-lc1-2# show bgp ipv6 20c0:a801::/64 BGP routing table entry for 20c0:a801::/64, version 52400 Paths: (1 available, best #1, table default) Not advertised to any peer 65000 65500 2603:10e2:400::6 from 2603:10e2:400::6 (3.3.3.6) Origin IGP, localpref 100, valid, internal, best (First path received) **Community: 1111:1111** Last update: Tue Sep 26 16:10:19 2023 str2-xxxx-lc1-2# show ip bgp 192.168.35.128/25 BGP routing table entry for 192.168.35.128/25, version 52947 Paths: (1 available, best #1, table default) Not advertised to any peer 65000 65502 3.3.3.6 from 3.3.3.6 (3.3.3.6) Origin IGP, localpref 100, valid, internal, best (First path received) **Community: 1111:1111** Last update: Tue Sep 26 16:10:09 2023 Signed-off-by: Abhishek Dosi <[email protected]>
amazor
pushed a commit
that referenced
this pull request
Oct 1, 2024
#### Why I did it
Dropping control character (message sent when XSUB connects to XPUB as part of ZMQ Proxy setup to notify that subscription has been made) in do capture has been flaky since control character is not guaranteed to be the first message sent if there are events (like event-down-ctr) being published to XSUB.
Scenarios
1) Control character is sent and is first message when starting capture service
`eventd#eventd#eventd: :- heartbeat_ctrl: Set heartbeat_ctrl pause=1`
`eventd#eventd#eventd: :- do_capture: Received subscription message when XSUB connects to XPUB`
2) Events like event-down ctr is sent before control character
`eventd#eventd#eventd: :- run: Dropping Message: 22 serialization::archive 18 17 sonic-events-host`
`eventd#eventd#eventd: :- run: Dropping Message: 22 serialization::archive 18 0 0 4 0 0 0 1 d 103 {"sonic-events-host:event-stopped-ctr":{"ctr_name":"EVENTD","timestamp":"2024-08-27T00:02:51.407518Z"}} 1 r 36 3357542f-bae1-458f-a804-660e620d21f5 1 s 1 9 1 t 19 1724716971407591080`
`heartbeat_ctrl: Set heartbeat_ctrl pause=1`
`do_capture: Received subscription message when XSUB connects to XPUB`
3) Control character is not sent at all
`eventd#eventd#eventd: :- heartbeat_ctrl: Set heartbeat_ctrl pause=1`
4) Control character is delayed and not caught when starting capture service, but is then caught after causing deserialize error.
`do_capture: Receiving event from source: 22 serialization::archive 18 17 sonic-events-host, will read second part of event`
`deserialize: deserialize Failed: input stream errorstr[0:64]:(#1) data type: std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >&`
`zmq_read_part: Failed to deserialize part rc=-2`
`zmq_read_part: last:errno=11`
`zmq_message_read: Failure to read part1 rc=-2`
`zmq_message_read: last:errno=11`
We can cover these scenarios by just dropping the control character inside zmq_message_read as part of events_common in swsscommon (different PR). In this PR we will remove such handling logic and make sure that empty events that will be sent by control character are ignored.
##### Work item tracking
- Microsoft ADO **(number only)**:28728116
#### How I did it
Remove logic for handling control character
#### How to verify it
UT and sonic-mgmt test cases.
VladimirKuk
pushed a commit
that referenced
this pull request
Nov 5, 2024
#### Why I did it
Dropping control character (message sent when XSUB connects to XPUB as part of ZMQ Proxy setup to notify that subscription has been made) in do capture has been flaky since control character is not guaranteed to be the first message sent if there are events (like event-down-ctr) being published to XSUB.
Scenarios
1) Control character is sent and is first message when starting capture service
`eventd#eventd#eventd: :- heartbeat_ctrl: Set heartbeat_ctrl pause=1`
`eventd#eventd#eventd: :- do_capture: Received subscription message when XSUB connects to XPUB`
2) Events like event-down ctr is sent before control character
`eventd#eventd#eventd: :- run: Dropping Message: 22 serialization::archive 18 17 sonic-events-host`
`eventd#eventd#eventd: :- run: Dropping Message: 22 serialization::archive 18 0 0 4 0 0 0 1 d 103 {"sonic-events-host:event-stopped-ctr":{"ctr_name":"EVENTD","timestamp":"2024-08-27T00:02:51.407518Z"}} 1 r 36 3357542f-bae1-458f-a804-660e620d21f5 1 s 1 9 1 t 19 1724716971407591080`
`heartbeat_ctrl: Set heartbeat_ctrl pause=1`
`do_capture: Received subscription message when XSUB connects to XPUB`
3) Control character is not sent at all
`eventd#eventd#eventd: :- heartbeat_ctrl: Set heartbeat_ctrl pause=1`
4) Control character is delayed and not caught when starting capture service, but is then caught after causing deserialize error.
`do_capture: Receiving event from source: 22 serialization::archive 18 17 sonic-events-host, will read second part of event`
`deserialize: deserialize Failed: input stream errorstr[0:64]:(#1) data type: std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >&`
`zmq_read_part: Failed to deserialize part rc=-2`
`zmq_read_part: last:errno=11`
`zmq_message_read: Failure to read part1 rc=-2`
`zmq_message_read: last:errno=11`
We can cover these scenarios by just dropping the control character inside zmq_message_read as part of events_common in swsscommon (different PR). In this PR we will remove such handling logic and make sure that empty events that will be sent by control character are ignored.
##### Work item tracking
- Microsoft ADO **(number only)**:28728116
#### How I did it
Remove logic for handling control character
#### How to verify it
UT and sonic-mgmt test cases.
shiraez
pushed a commit
that referenced
this pull request
Dec 11, 2024
…et#21095) Adding the below fix from FRR FRRouting/frr#17297 This is to fix the following crash which is a statistical issue [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Core was generated by `/usr/lib/frr/zebra -A 127.0.0.1 -s 90000000 -M dplane_fpm_nl -M snmp'. Program terminated with signal SIGABRT, Aborted. #0 0x00007fccd7351e2c in ?? () from /lib/x86_64-linux-gnu/libc.so.6 [Current thread is 1 (Thread 0x7fccd6faf7c0 (LWP 36))] (gdb) bt #0 0x00007fccd7351e2c in ?? () from /lib/x86_64-linux-gnu/libc.so.6 #1 0x00007fccd7302fb2 in raise () from /lib/x86_64-linux-gnu/libc.so.6 #2 0x00007fccd72ed472 in abort () from /lib/x86_64-linux-gnu/libc.so.6 #3 0x00007fccd75bb3a9 in _zlog_assert_failed (xref=xref@entry=0x7fccd7652380 <_xref.16>, extra=extra@entry=0x0) at ../lib/zlog.c:678 #4 0x00007fccd759b2fe in route_node_delete (node=<optimized out>) at ../lib/table.c:352 #5 0x00007fccd759b445 in route_unlock_node (node=0x0) at ../lib/table.h:258 #6 route_next (node=<optimized out>) at ../lib/table.c:436 #7 route_next (node=node@entry=0x56029d89e560) at ../lib/table.c:410 #8 0x000056029b6b6b7a in if_lookup_by_name_per_ns (ns=ns@entry=0x56029d873d90, ifname=ifname@entry=0x7fccc0029340 "PortChannel1020") at ../zebra/interface.c:312 #9 0x000056029b6b8b36 in zebra_if_dplane_ifp_handling (ctx=0x7fccc0029310) at ../zebra/interface.c:1867 #10 zebra_if_dplane_result (ctx=0x7fccc0029310) at ../zebra/interface.c:2221 sonic-net#11 0x000056029b7137a9 in rib_process_dplane_results (thread=<optimized out>) at ../zebra/zebra_rib.c:4810 sonic-net#12 0x00007fccd75a0e0d in thread_call (thread=thread@entry=0x7ffe8e553cc0) at ../lib/thread.c:1990 sonic-net#13 0x00007fccd7559368 in frr_run (master=0x56029d65a040) at ../lib/libfrr.c:1198 sonic-net#14 0x000056029b6ac317 in main (argc=9, argv=0x7ffe8e5540d8) at ../zebra/main.c:478
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Why I did it
Work item tracking
How I did it
How to verify it
Which release branch to backport (provide reason below if selected)
Tested branch (Please provide the tested image version)
Description for the changelog
Link to config_db schema for YANG module changes
A picture of a cute animal (not mandatory but encouraged)