11ac Multi-BSS Simulatin on latest ns-3-dev

Location of script used for simulation →./ns3/src/wifi/examples

used script "PIMRC_sim.sh" in ./ns3/src/wifi/scripts

reference simulator:https://github.com/kajihara-ry/ns3-11ac

[ns-3 installation procedure(Ubuntu 16.04)]

1. Clone this repo.

2. Build ns-3 under the 'ns3' folder.

   command : ./waf configure --enable-examples --build-profile=optimized

3. Compile ns-3.

   command : ./waf

4. After compiling ns-3, it will be possible to run simulations.

Issues

Compile issues:

There are some compile issues thanks to the update of the mainline ns-3, and I fixed them through this commit. I commented on the parts that are not used and when I put them back to your 11ac repo, it had the same results. So I am confident these modifications are right to do.

Throughput issue:

If I run on this version above, the UDP server only sends one packet. I've noticed that this is because the variable is set to true:

filterOutNonAddbaEstablished = true

I make some changes in this commit and then the packets are sending successfully. However, the throughput is low and unequal compared with the one in your repo.
Throughput from this repo, 5 STAs per AP:

Uplink [Mbps]: 400
Downlink [Mbps]: 0
Uplink Efficiency   9.18057 [%]
Downlink Efficiency 0 [%]
Throughput,  AP1 Uplink   [Mbps] : 36.7223
Throughput,  AP1 Downlink [Mbps] : 0
Throughput,  AP2 Uplink   [Mbps] : 16.4063
Throughput,  AP2 Downlink [Mbps] : 0
Total Throughput Uplink   [Mbps] : 53.1286
Total Throughput Downlink [Mbps] : 0

Throughput from the original repo, 5 STAs per AP:

Uplink [Mbps]: 400
Downlink [Mbps]: 0
Uplink Efficiency   7.26772 [%]
Downlink Efficiency 0 [%]
Throughput,  AP1 Uplink   [Mbps] : 29.0709
Throughput,  AP1 Downlink [Mbps] : 0
Throughput,  AP2 Uplink   [Mbps] : 27.9243
Throughput,  AP2 Downlink [Mbps] : 0
Total Throughput Uplink   [Mbps] : 56.9952
Total Throughput Downlink [Mbps] : 0