2024.11.21 Release

[MikaylaFischler]

New Features & Improvements

• Pocket Waste Management #399 Added pocket Waste app for waste control and monitoring.
• Fixes to minifier used for off-line installation bundled.
• Light Process Ramping on All Ramping #567 Report process ramping on max burn and burn rate target modes.
• Launch Startup from Configurator #535 Added a "Startup" button to the configurator home pages to launch the app directly.
• Prevent Bundled Analog I/O #578 Disallow bundled options for analog inputs and outputs since CC does not support that.

Graphics Library

• Checkboxes can now take a color pair for the disabled state to show as disabled.

Bug Fixes

• Pocket Guide Links Don't Work If Not Loaded #562 Fixed pocket guide links not working if the guide app wasn't already loaded.
• Always Alarm on Facility Radiation #571 Continue checking for critical unit alarms and facility radiation regardless of induction matrix status.
• No Generation Control Fault on Unformed Matrix #566 Properly fault out of automatic control if the induction matrix is unformed or faults, instead of just for disconnected.
• Can't Update Installer when No Apps Installed #573 Don't require an installed system to update the installer.
• SNA Outputs Incorrect at Low Input Fill #576 Fixed incorrect outflow rates from SNAs if they had less than 10mB of waste in them.

Known Issues

See wiki for longer standing compatibility issues: https://github.com/MikaylaFischler/cc-mek-scada/wiki/Known-Issues

Config Changes

None.

Component Version Updates

• Installer v1.19 to v1.20
• Bootloader 1.1 to 1.2
• Comms 3.0.1 to 3.0.2
• Common version unchanged
• Graphics 2.3.5 to 2.4.6
• Lockbox version unchanged
• Reactor PLC v1.8.12 to v1.8.13
• RTU Gateway v1.10.14 to v1.10.16
• Supervisor v1.5.10 to v1.5.17
• Coordinator v1.5.13 to v1.5.16
• Pocket v0.12.7-alpha to v0.12.10-alpha