s3: better handling of PSRAM pins

MoonModules · Sep 21, 2024 · 569ba1c · 569ba1c
1 parent 095d18b
commit 569ba1c
Show file tree

Hide file tree

Showing 2 changed files with 19 additions and 9 deletions.
diff --git a/wled00/pin_manager.cpp b/wled00/pin_manager.cpp
@@ -113,10 +113,8 @@ String PinManagerClass::getPinSpecialText(int gpio) {  // special purpose PIN in
   #ifdef ARDUINO_ARCH_ESP32
     #if defined(CONFIG_IDF_TARGET_ESP32S3)
       // ESP32-S3
-      if (gpio > 18 && gpio < 21) return (F("USB (CDC) / JTAG"));
-      #if !defined(BOARD_HAS_PSRAM)
-        if (gpio > 32 && gpio < 38)  return (F("(optional) Octal Flash or PSRAM"));
-      #else
+      if (gpio > 18 && gpio < 21) return (F("USB (CDC) or JTAG"));
+      #if CONFIG_SPIRAM_MODE_OCT && defined(BOARD_HAS_PSRAM)
         if (gpio > 32 && gpio < 38)  return (F("(reserved) Octal PSRAM or Octal Flash"));
       #endif
       //if (gpio == 0 || gpio == 3 || gpio == 45 || gpio == 46) return (F("(strapping pin)"));
@@ -136,7 +134,7 @@ String PinManagerClass::getPinSpecialText(int gpio) {  // special purpose PIN in
 
     #elif defined(CONFIG_IDF_TARGET_ESP32C3)
       // ESP32-C3
-      if (gpio > 17 && gpio < 20) return (F("USB (CDC) / JTAG"));
+      if (gpio > 17 && gpio < 20) return (F("USB (CDC) or JTAG"));
       //if (gpio == 2 || gpio == 8 || gpio == 9) return (F("(strapping pin)"));
 
     #else
@@ -737,12 +735,18 @@ bool PinManagerClass::isPinOk(byte gpio, bool output) const
   #if defined(CONFIG_IDF_TARGET_ESP32C3)
     // strapping pins: 2, 8, & 9
     if (gpio > 11 && gpio < 18) return false;     // 11-17 SPI FLASH
+    #if ARDUINO_USB_CDC_ON_BOOT == 1 || ARDUINO_USB_DFU_ON_BOOT == 1
     if (gpio > 17 && gpio < 20) return false;     // 18-19 USB-JTAG
+    #endif
   #elif defined(CONFIG_IDF_TARGET_ESP32S3)
     // 00 to 18 are for general use. Be careful about straping pins GPIO0 and GPIO3 - these may be pulled-up or pulled-down on your board.
+    #if ARDUINO_USB_CDC_ON_BOOT == 1 || ARDUINO_USB_DFU_ON_BOOT == 1
     if (gpio > 18 && gpio < 21) return false;     // 19 + 20 = USB-JTAG. Not recommended for other uses.
+    #endif
     if (gpio > 21 && gpio < 33) return false;     // 22 to 32: not connected + SPI FLASH
-    //if (gpio > 32 && gpio < 38) return false;     // 33 to 37: not available if using _octal_ SPI Flash or _octal_ PSRAM
+    // #if CONFIG_SPIRAM_MODE_OCT && defined(BOARD_HAS_PSRAM)
+    //   if (gpio > 32 && gpio < 38) return !psramFound(); // 33 to 37: not available if using _octal_ SPI Flash or _octal_ PSRAM
+    // #endif
     // 38 to 48 are for general use. Be careful about straping pins GPIO45 and GPIO46 - these may be pull-up or pulled-down on your board.
   #elif defined(CONFIG_IDF_TARGET_ESP32S2)
     // strapping pins: 0, 45 & 46

diff --git a/wled00/wled.cpp b/wled00/wled.cpp
@@ -594,9 +594,11 @@ void WLED::setup()
 #if defined(ARDUINO_ARCH_ESP32) && defined(BOARD_HAS_PSRAM)
   //psramInit(); //WLEDMM?? softhack007: not sure if explicit init is really needed ... lets disable it here and see if that works
   #if defined(CONFIG_IDF_TARGET_ESP32S3)
-  // S3: reserve GPIO 33-37 for "octal" PSRAM
-  managed_pin_type pins[] = { {33, true}, {34, true}, {35, true}, {36, true}, {37, true} };
-  pinManager.allocateMultiplePins(pins, sizeof(pins)/sizeof(managed_pin_type), PinOwner::SPI_RAM);
+    #if CONFIG_SPIRAM_MODE_OCT && defined(BOARD_HAS_PSRAM)
+      // S3: reserve GPIO 33-37 for "octal" PSRAM
+      managed_pin_type pins[] = { {33, true}, {34, true}, {35, true}, {36, true}, {37, true} };
+      pinManager.allocateMultiplePins(pins, sizeof(pins)/sizeof(managed_pin_type), PinOwner::SPI_RAM);
+    #endif
   #elif defined(CONFIG_IDF_TARGET_ESP32S2)
   // S2: reserve GPIO 26-32 for PSRAM (may fail due to isPinOk() but that will also prevent other allocation)
   //managed_pin_type pins[] = { {26, true}, {27, true}, {28, true}, {29, true}, {30, true}, {31, true}, {32, true} };
@@ -815,7 +817,11 @@ void WLED::setup()
   USER_PRINTLN(F("\nGPIO\t| Assigned to\t\t| Info"));
   USER_PRINTLN(F("--------|-----------------------|------------"));
   for(int pinNr = 0; pinNr < WLED_NUM_PINS; pinNr++) { // 49 = highest PIN on ESP32-S3
+#if defined(CONFIG_IDF_TARGET_ESP32S3)
+    if((pinManager.isPinOk(pinNr, false)) || (pinNr > 18 && pinNr < 21)) {  // softhack007: list USB pins
+#else
     if(pinManager.isPinOk(pinNr, false)) {
+#endif
       //if ((!pinManager.isPinAllocated(pinNr)) && (pinManager.getPinSpecialText(pinNr).length() == 0)) continue;      // un-comment to hide no-name,unused GPIO pins
       bool is_inOut = pinManager.isPinOk(pinNr, true);
 #if 0 // for testing