HUB75 bugfixes

* exclude HUB75 from ABL (bad macro in const.h; "pwr" item in json.cpp)
* show HUB75 as "physical" (LEDs preferences)
* minor corrections

wled00/bus_manager.cpp

@@ -536,7 +536,7 @@ BusHub75Matrix::BusHub75Matrix(BusConfig &bc) : Bus(bc.type, bc.start, bc.autoWh
   mxconfig.clkphase = false; // can help in case that the leftmost column is invisible, or pixels on the right side "bleeds out" to the left.
 
   // How many panels we have connected, cap at sane value
-  mxconfig.chain_length = max((u_int8_t) 1, min(bc.pins[0], (u_int8_t) 4)); // prevent bad data preventing boot due to low memory
+  mxconfig.chain_length = max((uint8_t) 1, min(bc.pins[0], (uint8_t) 4)); // prevent bad data preventing boot due to low memory
 
   #if defined(CONFIG_IDF_TARGET_ESP32S3) && defined(BOARD_HAS_PSRAM)
   if(bc.pins[0] > 4) {

wled00/const.h

@@ -260,7 +260,7 @@
 #define NUM_PWM_PINS(t) ((t) - 40) //for analog PWM 41-45 only
 #define IS_2PIN(t)      ((t) > 47)
 #define IS_VIRTUAL(t)        ( ((t) <= TYPE_RESERVED) || (((t) >= TYPE_NET_DDP_RGB) && ((t) < (TYPE_NET_DDP_RGB + 16))) ) // WLEDMM 80..95 are network "virtual" busses
-#define EXCLUDE_FROM_ABL(t)  ( IS_VIRTUAL(t) || ( (t) >= (TYPE_HUB75MATRIX + 10) && (t) < (TYPE_HUB75MATRIX + 10)))  // WLEDMM do not apply ato-brightness-limiter on these bus types 
+#define EXCLUDE_FROM_ABL(t)  ( IS_VIRTUAL(t) || ( (t) >= (TYPE_HUB75MATRIX) && (t) < (TYPE_HUB75MATRIX + 10)))  // WLEDMM do not apply auto-brightness-limiter on these bus types 
 
 //Color orders
 #define COL_ORDER_GRB             0           //GRB(w),defaut

wled00/data/settings_leds.htm

@@ -250,7 +250,7 @@
 						if (s+c > sLC) sLC = s+c; //update total count
 						if(c>maxLC)maxLC=c; //max per output
 						var t = parseInt(d.getElementsByName("LT"+n)[0].value); // LED type SELECT
-						if (t<80) sPC+=c; //virtual out busses do not count towards physical LEDs
+						if ((t<128) && ((t<80) || ((t>99)))) sPC+=c; //virtual out busses do not count towards physical LEDs //WLEDMM include HUB75 (>=100)
 					} // increase led count
 					continue;
 				}

wled00/json.cpp

@@ -905,7 +905,7 @@ void serializeInfo(JsonObject root)
   JsonObject leds = root.createNestedObject("leds");
   leds[F("count")] = strip.getLengthTotal();
   leds[F("countP")] = strip.getLengthPhysical2(); //WLEDMM - getLengthPhysical plus plysical busses not supporting ABL (i.e. HUB75)
-  leds[F("pwr")] = strip.currentMilliamps;
+  leds[F("pwr")] = strip.currentMilliamps > 100 ? strip.currentMilliamps : 0; // WLEDMM show "not calculated" for HUB75, or when all LEDs are out
   leds["fps"] = strip.getFps();
   leds[F("maxpwr")] = (strip.currentMilliamps)? strip.ablMilliampsMax : 0;
   leds[F("maxseg")] = strip.getMaxSegments();

wled00/wled.h

@@ -8,7 +8,7 @@
  */
 
 // version code in format yymmddb (b = daily build)
-#define VERSION 2409210
+#define VERSION 2409260
 
 // WLEDMM  - you can check for this define in usermods, to only enabled WLEDMM specific code in the "right" fork. Its not defined in AC WLED.
 #define _MoonModules_WLED_