Merge remote-tracking branch 'upstream/main' into merge-upstream

CHANGELOG.md

@@ -1,7 +1,28 @@
 ## WLED changelog
 
-#### Build 2306020
+#### Build 2306180
+
+-   Added client-side option for applying effect defaults from metadata
+-   Improved ESP8266 stability by reducing WebSocket response resends
+-   Updated ESP8266 core to 3.1.2
+
+#### Build 2306141
+-   Lissajous improvements
+-   Scrolling Text improvements (leading 0)
+
+#### Build 2306140
+-   Add settings PIN (un)locking to JSON post API
+
+#### Build 2306130
+-   Bumped version to 0.14-b3 (beta 3)
+-   added pin dropdowns in LED preferences (not for LED pins) and usermods
+-   introduced (unused ATM) NeoGammaWLEDMethod class
+-   Reverse proxy support
+-   PCF8754 support for Rotary encoder (requires wiring INT pin to ESP GPIO)
+-   Rely on global I2C pins for usermods (breaking change)
+-   various fixes and enhancements
 
+#### Build 2306020
 -   Support for segment sets (PR #3171)
 -   Reduce sound simulation modes to 2 to facilitiate segment sets
 -   Trigger button immediately on press if all configured presets are the same (PR #3226)

platformio.ini

@@ -39,6 +39,8 @@
 ; default_envs = esp32dev_qio80
 ; default_envs = esp32_eth_ota1mapp
 ; default_envs = esp32s2_saola
+; default_envs = esp32c3dev
+; default_envs = lolin_s2_mini
 
 ; MoonModules entries
 ; ===================
@@ -99,13 +101,14 @@ arduino_core_2_7_4 = [email protected]
 arduino_core_3_0_0 = [email protected]
 arduino_core_3_2_0 = [email protected]
 arduino_core_4_1_0 = [email protected]
+arduino_core_3_1_2 = [email protected]
 
 # Development platforms
 arduino_core_develop = https://github.com/platformio/platform-espressif8266#develop
 arduino_core_git = https://github.com/platformio/platform-espressif8266#feature/stage
 
 # Platform to use for ESP8266
-platform_wled_default = ${common.arduino_core_4_1_0}
+platform_wled_default = ${common.arduino_core_3_1_2}
 # We use 2.7.4.7 for all, includes PWM flicker fix and Wstring optimization
 #platform_packages = tasmota/framework-arduinoespressif8266 @ 3.20704.7
 platform_packages = platformio/framework-arduinoespressif8266
@@ -547,8 +550,8 @@ board = esp32-c3-devkitm-1
 board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
 build_flags = ${common.build_flags} ${esp32c3.build_flags} #-D WLED_RELEASE_NAME=ESP32-C3
   -D WLED_WATCHDOG_TIMEOUT=0
-  ; -DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB
-  -DARDUINO_USB_CDC_ON_BOOT=0   ;; for serial-to-USB chip
+  -DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB
+  ;-DARDUINO_USB_CDC_ON_BOOT=0   ;; for serial-to-USB chip
 upload_speed = 460800
 build_unflags = ${common.build_unflags}
 lib_deps = ${esp32c3.lib_deps}
@@ -660,10 +663,10 @@ platform = ${esp32s2.platform}
 platform_packages = ${esp32s2.platform_packages}
 board = lolin_s2_mini
 board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
-build_unflags = ${common.build_unflags} -DARDUINO_USB_CDC_ON_BOOT=1
+build_unflags = ${common.build_unflags} #-DARDUINO_USB_CDC_ON_BOOT=1
 build_flags = ${common.build_flags} ${esp32s2.build_flags} #-D WLED_RELEASE_NAME=LolinS2
   -DBOARD_HAS_PSRAM
-  -DARDUINO_USB_CDC_ON_BOOT=0
+  -DARDUINO_USB_CDC_ON_BOOT=1 # try disabling and enabling unflag above in case of board-specific issues, will disable Serial
   -DARDUINO_USB_MSC_ON_BOOT=0
   -DARDUINO_USB_DFU_ON_BOOT=0
   -DLOLIN_WIFI_FIX ; seems to work much better with this

tools/cdata.js

@@ -223,6 +223,7 @@ writeHtmlGzipped("wled00/data/index.htm", "wled00/html_ui.h", 'index');
 writeHtmlGzipped("wled00/data/simple.htm", "wled00/html_simple.h", 'simple');
 writeHtmlGzipped("wled00/data/pixart/pixart.htm", "wled00/html_pixart.h", 'pixart');
 writeHtmlGzipped("wled00/data/cpal/cpal.htm", "wled00/html_cpal.h", 'cpal');
+writeHtmlGzipped("wled00/data/pxmagic/pxmagic.htm", "wled00/html_pxmagic.h", 'pxmagic');
 /*
 writeChunks(
   "wled00/data",
@@ -390,12 +391,6 @@ const char PAGE_dmxmap[] PROGMEM = R"=====()=====";
       method: "gzip",
       filter: "html-minify",
     },
-    {
-      file: "liveviewws.htm",
-      name: "PAGE_liveviewws",
-      method: "gzip",
-      filter: "html-minify",
-    },
     {
       file: "liveviewws2D.htm",
       name: "PAGE_liveviewws2D",

usermods/BH1750_v2/usermod_bh1750.h

@@ -229,7 +229,9 @@ class Usermod_BH1750 : public Usermod
       user = root.createNestedObject(F("u"));
 
     JsonArray lux_json = user.createNestedArray(F("Luminance"));
-    if (!sensorFound) {
+    if (!enabled) {
+      lux_json.add(F("disabled"));
+    } else if (!sensorFound) {
         // if no sensor 
         lux_json.add(F("BH1750 "));
         lux_json.add(F("Not Found"));
@@ -303,8 +305,6 @@ class Usermod_BH1750 : public Usermod
 
     DEBUG_PRINT(FPSTR(_name));
     if (!initDone) {
-      // first run: reading from cfg.json
-      for (byte i=0; i<2; i++) ioPin[i] = newPin[i];
       DEBUG_PRINTLN(F(" config loaded."));
     } else {
       DEBUG_PRINTLN(F(" config (re)loaded."));

usermods/BME280_v2/usermod_bme280.h

@@ -9,7 +9,6 @@
 
 #include "wled.h"
 #include <Arduino.h>
-#include <Wire.h>
 #include <BME280I2C.h>               // BME280 sensor
 #include <EnvironmentCalculations.h> // BME280 extended measurements
 
@@ -34,7 +33,6 @@ class UsermodBME280 : public Usermod
   #ifdef ESP8266
     //uint8_t RST_PIN = 16; // Uncoment for Heltec WiFi-Kit-8
   #endif
-  int8_t ioPin[2] = {i2c_scl, i2c_sda};   // I2C pins: SCL, SDA...defaults to Arch hardware pins but overridden at setup()
   bool initDone = false;
 
   // BME280 sensor settings
@@ -442,8 +440,6 @@ class UsermodBME280 : public Usermod
     // default settings values could be set here (or below using the 3-argument getJsonValue()) instead of in the class definition or constructor
     // setting them inside readFromConfig() is slightly more robust, handling the rare but plausible use case of single value being missing after boot (e.g. if the cfg.json was manually edited and a value was removed)
 
-    int8_t newPin[2]; for (byte i=0; i<2; i++) newPin[i] = ioPin[i]; // prepare to note changed pins
-
     JsonObject top = root[FPSTR(_name)];
     if (top.isNull()) {
       DEBUG_PRINT(F(_name));
@@ -462,27 +458,14 @@ class UsermodBME280 : public Usermod
     configComplete &= getJsonValue(top[F("PublishAlways")], PublishAlways, false);
     configComplete &= getJsonValue(top[F("UseCelsius")], UseCelsius, true);
     configComplete &= getJsonValue(top[F("HomeAssistantDiscovery")], HomeAssistantDiscovery, false);
-    for (byte i=0; i<2; i++) configComplete &= getJsonValue(top[F("pin")][i], newPin[i], ioPin[i]);
 
     DEBUG_PRINT(FPSTR(_name));
     if (!initDone) {
       // first run: reading from cfg.json
-      for (byte i=0; i<2; i++) ioPin[i] = newPin[i];
       DEBUG_PRINTLN(F(" config loaded."));
     } else {
       DEBUG_PRINTLN(F(" config (re)loaded."));
       // changing parameters from settings page
-      bool pinsChanged = false;
-      for (byte i=0; i<2; i++) if (ioPin[i] != newPin[i]) { pinsChanged = true; break; } // check if any pins changed
-      if (pinsChanged) { //if pins changed, deallocate old pins and allocate new ones
-        PinOwner po = PinOwner::UM_BME280;
-        if (ioPin[0]==i2c_scl && ioPin[1]==i2c_sda) po = PinOwner::HW_I2C;  // allow multiple allocations of HW I2C bus pins
-        pinManager.deallocateMultiplePins((const uint8_t *)ioPin, 2, po);  // deallocate pins
-        for (byte i=0; i<2; i++) ioPin[i] = newPin[i];
-        setup();
-      }
-      // use "return !top["newestParameter"].isNull();" when updating Usermod with new features
-      return !top[F("pin")].isNull();
     }
 
     return configComplete;