Not able to run GENIE3 and GRNBOOST2

[Aishwarya-Girish]

Hi,

I am not able to run GENIE3 and GRNBOOST2, perhaps due to some Arboreto error. The error message I get is :

OSError: Timed out trying to connect to 'inproc://172.17.0.5/9/1' after 10 s: Timed out trying to connect to 'inproc://172.17.0.5/9/1' after 10 s: connect() didn't finish in time

Attached below is an image of the same. Would be grateful if you could help me resolve the issue.

[ktakers]

The tornado timeout appears to be the same issue reported in #66, #48, and #42. According to the Arboreto issue aertslab/arboreto#10 , GENIE3 can run successfully despite those timeout errors.

Can you please check under the directory outputs/example/GSD/GENIE3 to see if there's a rankedEdges.csv or an outFile.txt, which would indicate that GENIE3 did actually complete successfully?

[Aishwarya-Girish]

I checked under the outputs section. There is a GENIE3 folder alright, but not any ranked edges list. Maybe I'll run it again to check. What about GRNBOOST2 ? The entire BEELINE algorithm just gets stuck at this and doesn't proceed further to allow any of the other algorithms to complete. Awaiting your reply. Thank you, Aishwarya Girish

…

On Fri, Apr 7, 2023, 2:35 AM ktakers ***@***.***> wrote: The tornado timeout appears to be the same issue reported in #66 <#66>, #48 <#48>, and #42 <#42>. According to the Arboreto issue aertslab/arboreto#10 <aertslab/arboreto#10> , GENIE3 can run successfully despite those timeout errors. Can you please check under the directory outputs/example/GSD/GENIE3 to see if there's a rankedEdges.csv or an outFile.txt, which would indicate that GENIE3 did actually complete successfully? — Reply to this email directly, view it on GitHub <#92 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A46K53ZVNS3PV62CZV7WYY3W74V3HANCNFSM6AAAAAAWVFRAEI> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[Aishwarya-Girish]

I ran the pipeline again and I can see a "time.txt" folder in the outputs folder. However, I don't see any "rankedEdges.csv" file yet. I think it doesn't run despite the timeout error. Can you please check for the same? Thank You, Aishwarya Girish On Fri, Apr 7, 2023 at 8:41 AM Aishwarya G ***@***.***> wrote:

…

I checked under the outputs section. There is a GENIE3 folder alright, but not any ranked edges list. Maybe I'll run it again to check. What about GRNBOOST2 ? The entire BEELINE algorithm just gets stuck at this and doesn't proceed further to allow any of the other algorithms to complete. Awaiting your reply. Thank you, Aishwarya Girish On Fri, Apr 7, 2023, 2:35 AM ktakers ***@***.***> wrote: > The tornado timeout appears to be the same issue reported in #66 > <#66>, #48 > <#48>, and #42 > <#42>. According to the > Arboreto issue aertslab/arboreto#10 > <aertslab/arboreto#10> , GENIE3 can run > successfully despite those timeout errors. > > Can you please check under the directory outputs/example/GSD/GENIE3 to > see if there's a rankedEdges.csv or an outFile.txt, which would indicate > that GENIE3 did actually complete successfully? > > — > Reply to this email directly, view it on GitHub > <#92 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/A46K53ZVNS3PV62CZV7WYY3W74V3HANCNFSM6AAAAAAWVFRAEI> > . > You are receiving this because you authored the thread.Message ID: > ***@***.***> >

[elhaam]

I faced the same issue. The way I solved this was by stopping and removing all docker images to solve this error:
Please be cautious running the below command since it stops and removes all docker images, maybe you can select a specific docker image of your choice, instead.

docker stop $(docker ps -aq) && docker rm $(docker ps-aq)

[tmmurali]

@Aishwarya-Girish does the idea proposed by @elhaam work for you? If it does, we can close this issue.

[Aishwarya-Girish]

I am sorry sir, the idea doesn't work. GENIE3 and GRNBOOST2 still dont function due to the same issue

[elhaam]

@tmmurali @Aishwarya-Girish Another solution that has helped me in some cases is going to your Beeline/input/example/your_example/GENIE3 directory and removing subdirectories made for GENIE3. Also, remove subdirectories from Beeline/output/example/your_example/GENIE3 as well. Then run BoolODE.py again. This helped me run GENIE3 in some cases when I got the above error.

For a couple of experiments, I still couldn't run GENIE3 due to the above error, which was not resolved by the solutions I shared here.

[kevchen03]

Hello @Aishwarya-Girish @tmmurali ,
Assuming that the run phase inside BLRunner is completed, a temporary solution that has worked for me is to comment out the for-loops for generateInputs and run. The rankedEdges.csv file is generated solely within the parseOutput function using the files generated by the run phase, so you should be able to comment out the generateInputs and run loops to skip straight to generating the rankedEdges.csv file.