Towards bidirectional lower limb prostheses: restoring proprioception using EMG based vibrotactile feedback

Author: Myrthe Tilleman, contact through email: [email protected].

This repository contains all the code that was used for my Master Thesis in Human Neuroscience at the University of Turku, Finland. This project was realised in collaboration with Össur, Iceland. The goal of this thesis was to design, develop, and evaluate a novel vibrotactile feedback system in combination with an EMG-controlled powered knee or ankle prosthesis to restore proprioception. The thesis is available through the library of the University of Turku.

Materials

For this project, I used a standard laptop (Lenovo ThinkPad P53s), a microprocessor (Seeed Studio XIAO nRF52840 Sense, Seeed Technology Co., Ltd, China), seven 9mm vibrators (307-103, Precision Microdrives Limited, United Kingdom), and an EMG system designed by Össur to collect, amplify, and preprocess EMG data.

Requirements

All code on the laptop is written in Python 3.10.8 and the following libraries and their versions are used in this project:

• Numpy 1.23.5
• Pandas 1.5.2
• Matplotlib 3.6.2
• scikit-learn 1.2.1
• mpl_point_clicker 0.3.1
• mpl-interactions 0.22.1
• openpyxl 3.0.10
• tikzplotlib 0.10.1

The code on the microprocessor is written in CircuitPython 8.0.5, with the following libraries installed:

• asyncio 0.5.19
• adafruit_ticks 1.0.9

CircuitPython can be installed by following the Adafruit tutorial. Libraries can be added manually from the library bundles or using circup 1.2.1.

Files on the microprocessor

In order to write code on the microprocessor, connect the laptop to the microprocessor through a data USB-cable.

The following files are uploaded to the microprocessor:

• activate_vibration_motor.py
• preprocessing.py
• read_uart.py
• utils.py
• booty.py

Any file can be run directly by copying the code to code.py. The main file for the online feedback is run.py and this is run from code.py. The other files are run from the laptop.

Changing write access

For some files, the microprocessor needs write access to save data in files. This access can be given to the microprocessor by changing the file name of booty.py to boot.py. Then, a hard reset is required to take this change into effect. The microprocessor can be reset by unplugging and reinserting the USB cable. To give the write access back to the USB, change the name back by writing the following lines in the REPL:

import os
os.rename('/boot.py', '/booty.py') 

Then reset the microprocessor. Write access is necessary to successfully run the following files in code.py on the microprocessor:

• stimulation_calibration
• stimulation_validation

Calibrating the system

Before the actual calibration, make sure a folder exists for the user under user_files both on the laptop and the microprocessor. Then, create a folder with the current date for the corresponding user in the format year_month_day.

EMG calibration

For the EMG recording, don the custom made liner and socket correctly and connect to the EMG system through the Össur Toolbox. EMG calibration can be done by manually adding the maximum voluntary contraction and rest levels in mvc.csv and rest.csv files after a signal check or by following the steps described below:

• Record about 10 to 12 seconds of rest activity and save this log in rest.csv.
• Ask the user to contract their extensor muscle 3 times for a few seconds with rest in between.
• Save this log in extend.csv.
• Repeat this process for the flexor muscle and save the file in flex.csv.
• Make sure all files are saved in the folder that corresponds to the user and the date.
• Run EMG_calibration.py on laptop to create rest_activity and mvc files.
• Copy these files to the correct folder on the microprocessor.

Feedback calibration

First, a file needs to be created with the vibration duration for each level. When a standard vibration duration is used, this file can be copied from other users. Otherwise, it can be created by running stimulation_calibration on the microprocessor. When using this method, make sure the microprocessor has write permissions, see changing write access.

For familiarisation of the motors run activate_vibration_motors.py in code.py to loop through motors with set vibration strength in the previous step. When the vibrations are too strong or too weak, the duration can be adapted and the familiarisation can be repeated until the user is comfortable with the vibrations strength.

Then, a reinforcement learning and a validation session is performed. For these sessions, stimulation_validation is used. Before running this code, make sure the microprocessor has write permissions. For these session, ask the user to report back which level was activated. During the familiarisation session, confirm the correct level with the user. During the validation session, the user is given a forced-choice and write the user's predicted level in the REPL.

The validation accuracy is printed at the end of the session. If accuracy is high enough, the user is ready for online feedback, otherwise, repeat the process. For a more detailed view of the results, a confusion matrix can be plotted with plot_results.py on the laptop when the files with the true and predicted labels have been copied to the laptop.

Using the online system

To use the online system, run.py is copied to code.py. Make sure the right user and date is used in the input and that all calibration files exist. Then, the system can be disconnected from the laptop and used until the battery runs out.