Adding w3emc library as a module within the project and replacing cal…

…ls to exterior w3emc dependency with local subroutines from w3emc module. Removing sp dependency.
NCAR · May 22, 2024 · 9d17300 · 9d17300
1 parent 6d8fccb
commit 9d17300
Show file tree

Hide file tree

Showing 12 changed files with 369 additions and 20 deletions.
diff --git a/CMakeLists.txt b/CMakeLists.txt
@@ -176,9 +176,7 @@ set_target_properties(ccpp_physics PROPERTIES VERSION ${PROJECT_VERSION}
 target_include_directories(ccpp_physics PUBLIC
                            $<BUILD_INTERFACE:${CMAKE_CURRENT_BINARY_DIR}>)
 
-target_link_libraries(ccpp_physics PUBLIC w3emc::w3emc_d
-                                          sp::sp_d
-                                          NetCDF::NetCDF_Fortran)
+target_link_libraries(ccpp_physics PUBLIC NetCDF::NetCDF_Fortran)
 
 # Define where to install the library
 install(TARGETS ccpp_physics

diff --git a/physics/GWD/cires_tauamf_data.F90 b/physics/GWD/cires_tauamf_data.F90
@@ -1,5 +1,5 @@
 module cires_tauamf_data
-
+  use w3emc, only: w3doxdat, w3kind, w3movdat
   use machine, only: kind_phys
 !...........................................................................................
 ! tabulated GW-sources: GRACILE/Ern et al., 2018 and/or Resolved GWs from C384-Annual run

diff --git a/physics/GWD/cires_ugwpv1_module.F90 b/physics/GWD/cires_ugwpv1_module.F90
@@ -11,10 +11,11 @@ module  cires_ugwpv1_module
 !...................................................................................
 !
 !
-    use machine,            only : kind_phys
-    use  ugwp_common,       only : arad, pi, pi2, hpscale, rhp, rhp2, rh4, rhp4, khp, hpskm 
-    use  ugwp_wmsdis_init,  only : ilaunch, nslope, lhmet, lzmax, lzmin, lzstar   
-    use  ugwp_wmsdis_init,  only : tau_min, tamp_mpa   
+    use machine,           only : kind_phys
+    use ugwp_common,       only : arad, pi, pi2, hpscale, rhp, rhp2, rh4, rhp4, khp, hpskm
+    use ugwp_wmsdis_init,  only : ilaunch, nslope, lhmet, lzmax, lzmin, lzstar
+    use ugwp_wmsdis_init,  only : tau_min, tamp_mpa
+    use w3emc,             only : iw3jdn
 
     implicit none
     logical            :: module_is_initialized
@@ -436,7 +437,6 @@ subroutine calendar_ugwp(yr, mm, dd, ddd_ugwp)
     integer, intent(in) :: yr, mm, dd
     integer :: ddd_ugwp
 
-    integer ::  iw3jdn
     integer :: jd1, jddd
     jd1     = iw3jdn(yr,1,1)
     jddd    = iw3jdn(yr,mm,dd)

diff --git a/physics/Interstitials/UFS_SCM_NEPTUNE/GFS_phys_time_vary.scm.F90 b/physics/Interstitials/UFS_SCM_NEPTUNE/GFS_phys_time_vary.scm.F90
@@ -7,6 +7,8 @@
 !> @{
    module GFS_phys_time_vary
 
+      use w3emc, only: w3doxdat, w3kind, w3movdat
+
       use machine, only : kind_phys, kind_dbl_prec, kind_sngl_prec
 
       use mersenne_twister, only: random_setseed, random_number

diff --git a/physics/Interstitials/UFS_SCM_NEPTUNE/GFS_time_vary_pre.scm.F90 b/physics/Interstitials/UFS_SCM_NEPTUNE/GFS_time_vary_pre.scm.F90
@@ -3,6 +3,8 @@
 
    module GFS_time_vary_pre
 
+      use w3emc, only: iw3jdn, w3difdat, w3kind
+
       use funcphys, only: gfuncphys
 
       implicit none
@@ -95,7 +97,6 @@ subroutine GFS_time_vary_pre_timestep_init (jdat, idat, dtp, nsswr, &
         real(kind=kind_dbl_prec)  :: rinc8(5)
 
         integer :: w3kindreal,w3kindint
-        integer ::  iw3jdn      
         integer :: jd0, jd1
         real    :: fjd
 

diff --git a/physics/Interstitials/UFS_SCM_NEPTUNE/iccninterp.F90 b/physics/Interstitials/UFS_SCM_NEPTUNE/iccninterp.F90
@@ -7,6 +7,8 @@
 !! IN and CCN data.
 module iccninterp
 
+    use w3emc, only: w3doxdat, w3kind, w3movdat
+
     implicit none
 
     private

diff --git a/physics/Interstitials/UFS_SCM_NEPTUNE/sfcsub.F b/physics/Interstitials/UFS_SCM_NEPTUNE/sfcsub.F
@@ -7082,6 +7082,7 @@ subroutine clima(lugb,iy,im,id,ih,fh,len,lsoil,slmskl,slmskw,     &
      &,                tile_num_ch, i_index, j_index)
 !
       use machine , only : kind_io8,kind_io4
+      use w3emc, only : w3movdat
       implicit none
       character(len=*), intent(in) :: tile_num_ch
       integer, intent(in) :: i_index(len), j_index(len)
@@ -8611,6 +8612,7 @@ subroutine fixrda(lugb,fngrib,kpds5,slmask,                       &
      &,                 outlat, outlon, me)
       use machine      , only : kind_io8,kind_dbl_prec,kind_sngl_prec
       use sfccyc_module, only : mdata
+      use w3emc, only : w3movdat
       implicit none
       integer nrepmx,nvalid,imo,iyr,idy,jret,ihr,nrept,lskip,lugi,      &
      &        lgrib,j,ndata,i,inttyp,jmax,imax,ijmax,ij,jday,len,iret,  &

diff --git a/physics/MP/Morrison_Gettelman/aerinterp.F90 b/physics/MP/Morrison_Gettelman/aerinterp.F90
@@ -6,6 +6,7 @@
 !! This module contain subroutines of reading and interpolating
 !! aerosol data for MG microphysics.
 module aerinterp
+    use w3emc, only: w3doxdat, w3kind, w3movdat
 
     implicit none
 

diff --git a/physics/Radiation/radiation_astronomy.f b/physics/Radiation/radiation_astronomy.f
@@ -75,9 +75,9 @@
 !> \brief This module sets up astronomical quantities for solar radiation
 !!  calculations.
 !!
-!! Operational GFS selection for Solar constant value 
-!! (namelist control parameter - \b ISOL = 2) 
-!! \n ISOL=0: presribed value = 1366 \f$W m^{-2}\f$ (old) 
+!! Operational GFS selection for Solar constant value
+!! (namelist control parameter - \b ISOL = 2)
+!! \n ISOL=0: presribed value = 1366 \f$W m^{-2}\f$ (old)
 !! \n ISOL=10: prescibed value = 1361 \f$W m^{-2}\f$ (new)
 !! \n ISOL=1: NOAA old yearly solar constant table with 11-year cycle (range: 1944-2006)
 !! \n ISOL=2: NOAA new yearly solar constant table with 11-year cycle (range: 1850-2019)
@@ -86,10 +86,11 @@
 !! \version NCEP-Radiation_astronomy v5.2  Jan 2013
 
 !> This module sets up astronomy quantities for solar radiation calculations.
-      module module_radiation_astronomy  
+      module module_radiation_astronomy
 !
-      use machine,           only : kind_phys 
+      use machine,           only : kind_phys
       use module_iounitdef,  only : NIRADSF
+      use w3emc,             only : iw3jdn, w3fs26
 !
       implicit   none
 !
@@ -196,7 +197,7 @@ subroutine sol_init                                               &
       degrad = 180.0/con_pi
       tpi    = 2.0 * con_pi
       hpi    = 0.5 * con_pi
-      pid12  = con_pi/f12  
+      pid12  = con_pi/f12
 
 !  ---  initialization
       isolflg = isolar
@@ -400,7 +401,6 @@ subroutine sol_update                                             &
       real (kind=kind_phys) :: fjd, fjd1, dlt, r1, alp
 
       integer :: jd, jd1, iyear, imon, iday, ihr, imin, isec
-      integer :: iw3jdn
       integer :: i, iyr, iyr1, iyr2, jyr, nn, nswr, icy1, icy2, icy
 
       logical :: file_exist
@@ -901,7 +901,7 @@ subroutine coszmn                                                 &
         coszdg(i) = coszen(i) * rstp
         if (istsun(i) > 0 .and. coszen(i) /= 0.0_kind_phys) then
           coszen(i) = coszen(i) / istsun(i)
-        endif 
+        endif
       enddo
 !
       return

diff --git a/physics/SFC_Layer/UFS/module_nst_water_prop.f90 b/physics/SFC_Layer/UFS/module_nst_water_prop.f90
@@ -8,6 +8,7 @@
 module module_nst_water_prop
   use machine ,               only : kind_phys
   use module_nst_parameters , only : t0k, zero, one, half
+  use w3emc,                  only : iw3jdn
 
   implicit none
   !
@@ -544,7 +545,6 @@ subroutine compjd(jyr,jmnth,jday,jhr,jmn,jd,fjd)
     !$$$
     !
     integer :: jyr,jmnth,jday,jhr,jmn,jd
-    integer :: iw3jdn
     real (kind=kind_phys) fjd
     jd=iw3jdn(jyr,jmnth,jday)
     if(jhr.lt.12) then

diff --git a/physics/photochem/h2ointerp.f90 b/physics/photochem/h2ointerp.f90
@@ -6,7 +6,7 @@
 !> This module contains subroutines of reading and interpolating
 !! h2o coefficients.
 module h2ointerp
-
+   use w3emc, only: w3doxdat, w3kind, w3movdat
    implicit none
 
    private