Directions for getting SMHI data into home-assistant as sensors using Node-Red to parse and output the Json
Import this into your node-red installation and in the second node named SMHI JSON replace the coordinates with your own in the url. Then in the last node MQTT Output make sure that your own mqtt server is selected.
Add these to your sensors in Home-Assistant and reboot, they will then show up as "sensor.smhi_name" in your Home-Assistant install I also recommend you add the templates to your sensors, that way you will get the wind direction as a text message and not by degrees.
The reason that the sensors and template is split up in this git is that I recommend that you split up your config into directories, that makes maintaining your Home-Assistant configuration much easier and you can just download the .yaml files from this Git and add to your directory
- Information about splitting up your Home-Assisant configuration
- Svenska Hemautomatiseringsgruppen (Swedish)
- SMHI Open Data API Docs
Thanks goes to these wonderful people:
 Erik Näsström |
 Torbjörn Söderberg |
 Johan von Lindström |
|---|
This project follows the all-contributors specification. Contributions of any kind are welcome!