Hyrax docker

Current Version: Hyrax-1.17.0-1

Hyrax-1.17.0 is composed of:

OLFS version 1.18.14-1
BES version 3.21.0-46
libdap4 version 3.21.0-27

Contents

• Overview
• Quick Start
• Serving Your Data
• Server Logs
• Docker Images
  • hyrax
  • besd
  • olfs
  • ncwms
• Docker-Compose
  • hyrax
  • hyrax-wms
  • developer
• Ansible
• License
• Acknowledgements

Overview

The hyrax-docker project can build the following Docker images:

• hyrax- A complete Hyrax server in a single container. It may be built with or without a bundled ncWMS.
• besd - The BackEndServer (BES) component of Hyrax.
• olfs - The OLFS component of Hyrax, a Java Web Application deployed in Apache Tomcat.
• ncwms - The ncWMS application from our friends at the Reading e-Science Centre.
• ngap - A specialization of the Hyrax server for deployment in the NASA cloud. This variant is dependent on the injection of numerous configuration information at launch an is unlikely to be of use to people whoa are not directly involved with the NGAP project.

Each of these images can be run standalone. The besd, olfs, and the ncwms images may be combined via docker compose or ansible.

Note: We build and upload our official release containers to Docker Hub. We also produce and publish to Docker Hub snapshot containers for every CI build of hyrax, olfs, besd, and ngap images. While these CI build images have passed all of our various tests they are not official releases. Caveat Emptor.

The default configuration has the Hyrax service start up providing access to the default (test) data, but can easily be configured to serve data from the host machine (see Using Hyrax docker to serve your data).

NOTE: This code is based on work started by Gareth Williams at CSIRO and contributed to OPeNDAP. We are grateful for their support.

Quick Start

You can easily build your own Docker image of Hyrax using the material in this project. Alternatively, you can download offical images from our various DockerHub repositories. Both are discussed below.

Get The Desired Image

Download

Probably the quickest way to get started is to pull one of our images from Docker Hub and run that. Each of the docker hub pages has simple launch instructions for the associated image(s). More elaborate instructions may be found below in this document.

Hyrax Docker Hub Pages

• Hyrax Data Server
• Hyrax Data Server + ncWMS2
• besd
• olfs

Build

Build and run a dockerized Hyrax, serving your own data.

Each build is based on a build recipe that specifies the binary components to be used in the build.

For our CI builds those components reside exclusively in a private S3 bucket owned by OPeNDAP. In order to build using those recipes, one needs to have credentials to access the S3 bucket. Once you have configured your AWS credentials (either using the AS configuratrion or envirnment variables) thebuild_from_ci_recipe.sh shell script will perform the retrieval and docker build using the recipe supplied, or the most recent recipe in the snapshot.time file.

Our official release builds can be (re)built by using one of the recipes located in the releases directory. The build_from_release_recipe.sh shell script located in this directory will build the latest release, or it can be told which build recipe file to utilize as the only command line parameter to the shell script.

For detailed information about each of the four Docker container images, see the section Images below.

To build the single container hyrax, clone this project

git clone https://github.com/opendap/hyrax-docker

change directory to the top of the project:

cd hyrax-docker

and then use build_from_release_recipe.sh

./build_from_release_recipe.sh

To build the docker image using the latest release binaries located at www.opendap.org/pub

To build the release from a previous version, for example 1.16.8:

./build_from_release_recipe.sh releases/hyrax-1.16.8-build-recipe

Running The Server

To run the container:

docker run -d -h hyrax -p 8080:8080 --name=hyrax_container hyrax_image

To run the container with ncWMS you'll need to tell the server where the ncWMS service is located. This can be done by utilizing the container's -n paramter to specify the endpoint like this:

docker run -d -h hyrax -p 8080:8080 --name=hyrax_container hyrax_image -n http://localhost:8080

TIP: The value of -n should be the outward facing domain name / IP address of your Docker container. If you are running a container on your local system, then the example value of http://localhost:8080 should work well. If your Hyrax container is running elsewhere (in AWS for example) you'll have to sort out what the value should be. If the -n parameter is omitted from the docker run command then the value used will be the value of --build-arg NCWMS_BASE from the docker build command. If no NCWMS_BASE was specified in the docker build command then the value defaults to https://localhost:8080 (note that this is an HTTPS transport URL)

To configure the hyrax_container so the server is accessible using a port other than 8080, such as port 80, the default port for HTTP. This can also be used to run several servers, each accessed using a different port (e.g., you can have a development server running on port 8080 and then use -p 9090:8080 to bind the Hyrax in the docker container to the localhost:9090).

To run the Dockerized Hyrax on port 80, use (note that docker is started as the super user because only root can bind ports less than 1024).

sudo docker run -d -h hyrax -p 80:8080 --name=hyrax_container hyrax_image

To stop the container

docker stop hyrax_container
docker rm hyrax_container

where the argument to docker stop is the value passed in for the --name parameter with docker run. The command docker rm removes the container and is needed only if you want to (re)start the container with different values for any of the docker run parameters.

Using Hyrax docker to serve your data

To serve data other than the default data included with Hyrax/BES, use the volume option with docker run to map the path to data on your host to /usr/share/hyrax in the Hyrax or BES container (--volume <your path>:/usr/share/hyrax).

docker run --hostname hyrax --port 8080:8080 --volume /home/mydata:/usr/share/hyrax --name=hyrax_container hyrax_image

Server Logs & Serving Your Data

docker run

We can use volume mounts on the command line of the docker run command to collect the server logs on the local file system.

Example - Run Hyrax & collect logs.

cd hyrax-docker/hyrax-latest
docker build -t hyrax --no-cache hyrax
prefix=`pwd`
docker run \
   --name hyrax \
   --publish 8080:8080 \
   --volume $prefix/logs:/var/log/tomcat \
   --volume $prefix/logs:/var/lib/tomcat/webapps/opendap/WEB-INF/conf/logs \
   --volume $prefix/logs:/var/log/bes \
   hyrax \
   -e [email protected] \
   -s \
   -n http://localhost:8080

And we can use the mounts to serve data from the Docker host filesystem.

Example - Run Hyrax, and serve local data.

cd hyrax-docker/hyrax-latest
docker build -t hyrax --no-cache hyrax
prefix=`pwd`
docker run \
   --name hyrax \
   --publish 8080:8080 \
   --volume $prefix/local_data:/usr/share/hyrax \
   hyrax \
   -e [email protected] \
   -s \
   -n http://localhost:8080

Example - Run Hyrax & ncWMS, collect logs, serve local data.

cd hyrax-docker/hyrax-latest
docker build -t hyrax_ncwms --build-arg USE_NCWMS=true --no-cache hyrax
prefix=`pwd`
docker run \
   --name hyrax \
   --publish 8080:8080 \
   --volume $prefix/local_data:/usr/share/hyrax \
   --volume $prefix/logs:/var/log/tomcat \
   --volume $prefix/logs:/var/lib/tomcat/webapps/opendap/WEB-INF/conf/logs \
   --volume $prefix/logs:/var/log/bes \
   --volume $prefix/logs:/root/.ncWMS2/logs \
   hyrax_ncwms \
   -e [email protected] \
   -s \
   -n http://localhost:8080

docker-compose

The docker compose files contain volume mounts that collect the various server logs onto the local file system. There also (disabled) examples of using mounts to map the BES cache onto the host filesystem and to supplant the default BES configuration with one from the host filesystem.

For example, this YML snippet:

    volumes:
     - ./logs/olfs_tomcat:/usr/local/tomcat/logs
     - ./logs:/usr/local/tomcat/webapps/opendap/WEB-INF/conf/logs

Maps the tomcat logs to ./logs/olfs_tomcat and the various OLFS log files to ./logs

See the project YML for more:

• developer.yml
• hyrax.yml
• hyrax_wms.yml

Images

Performance Note:We performed a rudimentary speed check comparing the single container Hyrax with the two container version launched by using docker-compose and the hyrax.yml file. Our results (below) indicated that, for our test, there was no significant performance difference between the two. YMMV.

one_container_times:  n=100, min=  129.96,  mean=  131.41 +/-  0.54,  max=  133.07
    
two_container_times   n=100, min=   82.90,  mean=  126.42 +/- 13.23,  max=  133.03

hyrax

This image contains a complete Hyrax server. Currently based on CentOS-7 and Tomcat-7 installed using yum.

build arguments

• USE_NCMWS - Setting the value of the argument to "true" (--build-arg USE_NCWMS=true) will cause the ncWMS application to be included in the container.

• DEVELOPER_MODE - Setting the value of the argument to "true" (--build-arg DEVELOPER_MODE=true) instructs the build to insert default authentication credentials into the ncWMS admin interface so that it maybe be accessed in the running container. Otherwise the ncWMS admin page is unreachable and not required as its configuration is copied into the image during the build.

Environment Variables and Command Line Arguments

• SERVER_HELP_EMAIL (-e) - The email address of the support person for the service. This will be returned in error and help pages.

• FOLLOW_SYMLINKS (-s) - Instructs the server to follow symbolic links in the file system.

• NCWMS_BASE (-n) - The system needs to know the publicly accessible service base for the ncWMS (something like http://yourhost:8080). If all you want is to test it on your local system then the value of http://localhost:8080 will suffice.

• JAVA_OPTS - If JAVA_OPTS is defined in the container runtime environment, tomcat/olfs/ncWMS will include those options in the service start up. There are many options that could be passed. Of particular note is –Xmx which sets the amount of memory available. ncWMS will not work properly with low memory limits. JAVA_OPTS can be set by normal methods: on the docker run command line, or in docker-compose configuration or in your own container layer if you build on the provided containers. (This from Gareth 11 Sept 2017.)

Command Line Examples:

Command Line Options Example

Launch Hyrax using command line switches to set the admin email to (-e [email protected]), enable symbolic link traversal (-s), and set the ncWMS service base to (-n http://foo.bar.com:8080)

docker run                      \
    --name hyrax                \
    --publish 8080:8080         \
    hyrax_image                 \
    -e [email protected]      \
    -s                          \
    -n http://foo.bar.com:8080

Environment Variables Example

Launch Hyrax using command line defined environment variables to set the admin email to (-e [email protected]), enable symbolic link traversal (-s), and set the ncWMS service base to (-e NCWMS_BASE=http://foo.bar.com)

docker run \
    --name hyrax \
    --publish 8080:8080 \
    --env FOLLOW_SYMLINKS=true \
    --env [email protected] \
    --env NCWMS_BASE=http://foo.bar.com \
    hyrax_image

NOTE: The environment variables are set to the left of the image name. The command line switches occur AFTER the image name.

The Whole Enchilada

In this example we use the command line parameters to condition the server. We specify a read-only volume for data, 3 read-write volumes for collecting logs on the local disk, and finally mount our local BES configuration onto the Docker BES instance configuration.

docker run \
    --name hyrax \
    --publish 8080:8080 \
    --volume  /usr/share/data:/usr/share/hyrax:ro  \
    --volume /tmp/logs/tomcat:/var/log/tomcat \
    --volume /tmp/logs:/var/lib/tomcat/webapps/opendap/WEB-INF/conf/logs \
    --volume /tmp/logs:/var/log/bes \
    --volume /etc/bes:/etc/bes \
    hyrax \
    -e [email protected] \
    -s \
    -n http://localhost:8080

And again but this time using command line set enironment variables. Same result as just above.

docker run \
    --name hyrax \
    --publish 8080:8080 \
    --volume  /usr/share/data:/usr/share/hyrax:ro  \
    --volume /tmp/logs/tomcat:/var/log/tomcat \
    --volume /tmp/logs:/var/lib/tomcat/webapps/opendap/WEB-INF/conf/logs \
    --volume /tmp/logs:/var/log/bes \
    --volume /etc/bes:/etc/bes \
    --env FOLLOW_SYMLINKS=true \
    --env [email protected] \
    --env NCWMS_BASE=http://foo.bar.com \
    hyrax_image

Advanced Examples

In the event that greater control of the Hyrax configuration is desired, or additional disk space is required for the various BES caching activities one may utilize volume mounts to address these issues.

Map BES cache to host filesystem

docker run \
    --name hyrax \
    --publish 8080:8080 \
    --volume /tmp/bes_cache:/tmp  \
    --volume /usr/share/data:/usr/share/hyrax:ro  \
    --volume /tmp/logs/tomcat:/var/log/tomcat \
    --volume /tmp/logs:/var/lib/tomcat/webapps/opendap/WEB-INF/conf/logs \
    --volume /tmp/logs:/var/log/bes \
    --env FOLLOW_SYMLINKS=true \
    --env [email protected] \
    --env NCWMS_BASE=http://foo.bar.com \
    hyrax_image

Annontation:

• --volume /tmp/bes_cache:/tmp: Maps the docker container's /tmp dir to the docker host directory /tmp/bes_cache
• --volume /usr/share/data:/usr/share/hyrax:ro: Maps the docker container's Hyrax data directory to the docker host directory /usr/share/data
• --volume /tmp/logs/tomcat:/var/log/tomcat: Maps the docker container's Tomcat logs directory to the docker host directory /tmp/logs/tomcat
• --volume /tmp/logs:/var/lib/tomcat/webapps/opendap/WEB-INF/conf/logs: Maps the docker container's OLFS logs to the docker host directory /tmp/logs
• --volume /tmp/logs:/var/log/bes: Maps the docker container's BES log files to the docker host directory /tmp/logs

Replace default BES configuration

docker run \
    --name hyrax \
    --publish 8080:8080 \
    --volume /home/roger/bes:/etc/bes  \
    --volume /usr/share/data:/usr/share/hyrax:ro  \
    --volume /tmp/logs/tomcat:/var/log/tomcat \
    --volume /tmp/logs:/var/lib/tomcat/webapps/opendap/WEB-INF/conf/logs \
    --volume /tmp/logs:/var/log/bes \
    --env FOLLOW_SYMLINKS=true \
    --env [email protected] \
    --env NCWMS_BASE=http://foo.bar.com \
    hyrax_image

Annontation:

• --volume /home/roger/bes:/etc/bes: Replaces the docker container's BES configuration with one held in the docker host file system directory /home/roger/bes

Replace default BES & OLFS configuration

docker run \
    --name hyrax \
    --publish 8080:8080 \
    --volume /home/roger/bes:/etc/bes  \
    --volume /home/roger/olfs:/var/lib/tomcat/webapps/opendap/WEB-INF/conf \
    --volume /usr/share/data:/usr/share/hyrax:ro  \
    --volume /tmp/logs/tomcat:/var/log/tomcat \
    --volume /tmp/logs:/var/log/bes \
    --env FOLLOW_SYMLINKS=true \
    --env [email protected] \
    --env NCWMS_BASE=http://foo.bar.com \
    hyrax_image

Annontation:

• --volume /home/roger/bes:/etc/bes: Replaces the docker container's BES configuration with one held in the docker host file system directory /home/roger/bes
• --volume /home/roger/olfs:/var/lib/tomcat/webapps/opendap/WEB-INF/conf: Replaces the docker container's OLFS configuration with one held in the docker host file system directory /home/roger/olfs

besd

Note: The besd, olfs, and ncWMS containers are tested only minimally by us at thsi time (Nov 2018) and are really for specialized cases wehre fine-grained control over the server tiers is needed. You'll need to build these containers yourself.

This CentOS-7 based image contains just the BES component of the Hyrax server.

build arguments (none)

Environment Variables and Command Line Arguments

• SERVER_HELP_EMAIL (-e) - The email address of the support person for the service. This will be returned in error and help pages.

• FOLLOW_SYMLINKS (-s) - Instructs the server to follow symbolic links in the file system.

Command Line Examples:

Launch besd using command line switches to set the admin email to (-e [email protected]) and enabling symbolic link traversal (-s)

docker run --name besd -p 10022:10022 besd_image -e [email protected] -s

Launch besd using command line defined environment variables to set the admin email to (-e [email protected]) and enable symbolic link traversal (-s)

docker run --name besd -p 10022:10022 -e FOLLOW_SYMLINKS=true -e [email protected] besd_image

NOTE: The environment variables are set to the left of the image name. The command line switches occur AFTER the image name.

olfs

This image, based on the UNIDATA security hardened Tomcat, contains just the OLFS web application.

NOTE: This image does not run Tomcat in its 'security' mode

build arguments

• USE_NCMWS - Setting the value of the argument to "true" (--build-arg USE_NCWMS=true) will cause the OLFS to be configured to provide ncWMS links, but will not include the ncWMS application in the image.

Environment Variables and Command Line arguments

• NCWMS_BASE (-n) - The system needs to know the publicly accessible service base for ncWMS (something like http://yourhost:8080). If all you want is to test it on your local system then the default value of http://localhost:8080 will suffice.

Command Line Examples:

Launch the olfs using command line switches to set the ncWMS service base to (-n http://foo.bar.com:8080)

docker run --name olfs -p 8080:8080 olfs_image -n http://foo.bar.com:8080

Launch the olfs using command line defined environment variables to set the ncWMS service base to (-e NCWMS_BASE=http://foo.bar.com)

docker run --name besd -p 8080:8080 -e NCWMS_BASE=http://foo.bar.com olfs_image

ncwms

This image, based on the official Tomcat:8 image, contains just the ncWMS-2.2.2 web application.

NOTE: This image does not run Tomcat in its 'security' mode

build arguments

• DEVELOPER_MODE - Setting the value of the argument to "true" (--build-arg DEVELOPER_MODE=true) instructs the build to insert default authentication credentials into the ncWMS admin interface so that it maybe be accessed in the running container. Otherwise the ncWMS admin page is unreachable as it is not required at runtime. Its configuration is copied into the image during the build.

Environment Variables and Command Line arguments

None

Command Line Examples:

Launch the ncwms using command line switches to set the ncWMS service base to (-n http://foo.bar.com:8080)

docker run --name ncwms -p 8080:8080 ncwms_image

Docker-Compose

We provide several YAML files for docker-compose. All of the files are written to load the file ./local.env in order to set the environment variables described above. A template for this file may be found in ./local.env.orig, copy it to ./local.env and edit that to configure your Hyrax instance.

hyrax.yml

This builds and launches a composed Hyrax made up of a single besd and a single olfs container. Log directories for the OLFS, Tomcat, and the BES are mapped to the ./logs directory.

Start: docker-compose -f hyrax.yml up

Stop: docker-compose -f hyrax.yml down --remove-orphans

hyrax_wms.yml

This builds and launches a composed Hyrax made up of a single besd, a single olfs, and a single *ncWMS container. Log directories for the OLFS, Tomcat, and the BES are mapped the ./logs directory.

Start: docker-compose -f hyrax_wms.yml up

Stop: docker-compose -f hyrax_wms.yml down --remove-orphans

developer.yml

This builds and launches a hyrax_wms, but in developer mode. Log directories the OLFS, Tomcat, and the BES are mapped to the ./logs directory.

Start: docker-compose -f developer.yml up

Stop: docker-compose -f developer.yml down --remove-orphans

Ansible

It's possible that the existing playbook.yml file will work, but it has not been tested.

License

Copyright (c) 2017 OPeNDAP, Inc.

Authors: Nathan David Potter [email protected], Dan Holloway [email protected], James Gallagher [email protected]

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 3.0 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA

You can contact OPeNDAP, Inc. at PO Box 112, Saunderstown, RI. 02874-0112.

Acknowledgements

Based on https://bitbucket.csiro.au/projects/ASC/repos/hyrax-docker/, Dec 19, 2016, by [email protected]. That project was licensed under a CSIRO variation of a MIT / BSD Open Source License. The license text is in the file CSIRO_MIT_LICENSE

NOTE: Gareth wrote: Ideas have been drawn from https://github.com/Unidata/thredds-docker and various other contributions on dockerhub, including the official postgres container's exemplar use of variables with an entrypoint.