Skip to content

Design files for the open hardware designs used by 3DR, such as The pixhawk 2.0 used in the Factory Solo ( mostly REV_D ), early non-production bits of the 2.1 "Cube" by ProfiCNC/Hex ( something newer than REV_F ), and an old version of the can px4 flow, etc.

Notifications You must be signed in to change notification settings

OpenSolo/Pixhawk_OS_Hardware

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

21 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Pixhawk_OS_Hardware

Design files for the open hardware designs used by 3DR

Some of the files in this Repository are derivitives of the PX4 project.

PX4 is an open hardware design, following the OSHW 1.1 definition licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0) license. Website at: http://pixhawk.ethz.ch/px4/

That includes FMUv3 IMUv3 PSMv3

the following licence applies to these files.

UNLESS OTHERWISE MUTUALLY AGREED TO BY THE PARTIES IN WRITING, LICENSOR OFFERS THE WORK AS-IS AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE WORK, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTIBILITY, FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT, OR THE ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OF ABSENCE OF ERRORS, WHETHER OR NOT DISCOVERABLE. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO SUCH EXCLUSION MAY NOT APPLY TO YOU. EXCEPT TO THE EXTENT REQUIRED BY APPLICABLE LAW, IN NO EVENT WILL LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES ARISING OUT OF THIS LICENSE OR THE USE OF THE WORK, EVEN IF LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. http://creativecommons.org/licenses/by-sa/3.0/

About

Design files for the open hardware designs used by 3DR, such as The pixhawk 2.0 used in the Factory Solo ( mostly REV_D ), early non-production bits of the 2.1 "Cube" by ProfiCNC/Hex ( something newer than REV_F ), and an old version of the can px4 flow, etc.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • ANTLR 68.5%
  • Shell 18.0%
  • HTML 13.5%