Compatibility

User reported hardware attempted with PAI

Firmware Upgrade WARNING:

Do not upgrade EVO firmware versions to 7.50.000+ if you use Serial connection. Process is irreversible! Paradox introduces serial communication encryption which most probably will break our PAI ability to talk to the panel.

Supported

Other versions may be also supported. If PAI works with your panel, and the model-version combination is not listed, please edit the next table.

Panel		IP module			Conne- ction			Notes
Model	Version	IP100	IP150	IP150+	Local IP	SWAN	Serial
EVOHD	4.50	-	-		-	-	❌	Did not work with ESP32. #198
EVOHD	6.91	-	4.42		✅	-	-
EVOHD	7.30	4.42.002	IP150		✅	-	-
EVOHD	7.31	-	1.34		✅	-	-
EVOHD	7.31	5.20.0E	-		✅	-	✅	Works with Serial via ESP32
EVO48	2.20	5.10	-		✅	-	-
EVO192	2.66	5.10.06	-		✅	-	-
EVO192	3.20	-	5.3		✅	-	-
EVO192	6.86	5.10	-		✅	-	-
EVO192	6.90	5.1.0	1.32		✅	-	✅
EVO192	7.30	-	1.32		✅	-	✅
EVO192	7.30	-	4.42		✅	-	-
EVO192	7.31.1	-	-	5.02.019	✅	-	-
EVO192	7.31	-	-	5.05	✅	-	-
EVO192	7.52.1	-	1.34.000		✅	-	-	#272 This panel FW has encrypted serial but connects fine via IP150
EVO192	7.70.18	-		5.05.3	✅	-	-	#272 This panel FW has encrypted serial but connects fine via IP150
EVO192	7.70.1	-		5.06	✅	-	-	#272 This panel FW has encrypted serial but connects fine via IP150
MG5000	4.16.20	-	4.40		✅	-	-
MG5000	4.72	-	-	5.6	-	✅	-	Trying to work on local connection as well
MG5000	4.74.0	-	-	-	-	-	✅	Connection through board serial pins with TTL-to-USB converter
MG5000	4.8.0	-		5.03	✅	-	-
MG5050	4.92	-	-		✅	-	✅	Works with Serial via ESP8266
MG5050	4.96	-	4.40		✅	-	✅
MG5050	4.72	-	1.26		✅	-	-
MG5050	4.74	-	-		✅	-	✅	Works with Serial via ESP32
MG5050	6.80	-	4.40		✅	-	✅
MG5050	7.15.2	-	4.40.04		✅	-	-
MG5050	7.15.2	-	5.02.042		✅	-	-
MG5050	7.01.12	-	5.02.019		✅	-	-
MG5050	7.17.0	-	-	-	✅	-	-	Works with Serial via ESP8266
MG5050+	1.22.001	-	-	✅	-	-	✅	Works with Serial via RPi Zero W - with baud rate set to 115200
MG5050+	1.28.001	-	-	-	-	-	✅	Works with Serial via ESP32 - with baud rate set to 115200. Required alternate 0-encoding for PC password (see point 3 here)
MG5075	1.3.8	-	-		✅	-	✅
SP4000	5.20	-	5.02.019		✅	-	✅
SP5500	2.40.1	-	-		-	-	✅
SP5500	4.54	-	4.42		✅	-	-
SP5500	4.94	-	5.02.45	-	✅	-	-	Haven`t tested with Serial. Work on IP connection
SP5500	4.94	-	-		✅	-	✅	Works with Serial via ESP32
SP5500	6.10.2	-	-		-	-	✅	USB to Serial via FTDI
SP5500	7.14.2	-	-		✅	-	✅	USB to Serial via FTDI
SP5500	5.20	-	5.02.19		✅	-	-	PAI 3.4.0
SP6000	4.15	-	-		-	-	✅
SP6000	4.54	-	-	✅	✅	-	-
SP6000	4.72	1.24	-	-	✅	-	-
SP6000	4.94	-	-	5.06.014	-	-	✅
SP6000	6.80	-	5.02		✅	✅	-	More stable with SWAN disabled
SP6000	7.00.012	latest	-	-	✅	-	-	Works with IP100 module
SP6000	7.14.2	-	5.02.19	-	✅	-	✅	Working with serial via ESP32
SP6000+	1.15.5	-	5.2.		✅	-	-
SP7000	5.18	5.20	-		✅	-	-
SP7000	5.20	-	4.40		✅	-	-
SP7000	6.90	-	4.42		✅	-	-
SP7000	7.14.2	-	5.2.9		✅	✅	-
SP7000	7.14.2	-	-	-	-	-	✅	Both USB to serial (FTDI) and serial via ESP32
SP7000	7.14.2	-	-	5.5.8	✅	-	-
SP7000+	1.15.005	-	-	5.06.014	✅	-	-	Tested with "dev" branch
SP7000+	1.29.000	-	-	5.06.014	✅	-	-	Tested with "dev" branch
EVOHD+	1.3.1	-	-	5.06.014	✅	-	-	Tested with "dev" branch
EVOHD+	1.4.1	-	-	5.06.014	✅	-	-	Tested with "dev" branch

Unsupported:

• MG6250 - unsupported protocol

---

Note:

For simpler table editing you can use https://www.tablesgenerator.com/markdown_tables

Copy only table to the editor. Not the whole page. Use Preview tab before submitting the change.

Features that depend on firmware versions:

EVO192 and EVOHD:

• PGM control requires fw 4.75+