Configuration

Jump to bottom Edit New page

Jevgeni Kiski edited this page Oct 14, 2019 · 22 revisions

Configuration

See config/pai.conf.example for all configuration options.

Configuration file should be placed in one of these locations:

/etc/pai/pai.conf
/usr/local/etc/pai/pai.conf
~/.local/etc/pai.conf

EVO specifics

As project was initially designed for SP/MG panels. EVO panels require some configuration fine tuning.

Set these settings

STATUS_REQUESTS = list(range(1, 6))

PARTITIONS_CHANGE_NOTIFICATION_IGNORE = [
  'arm_full',
  'exit_delay',
  'all_zone_closed', 
  'ready',
  'stay_instant_ready',
  'force_ready',
  'entry_delay',
  'auto_arming_engaged'
]

If you use Serial connection you need to set SERIAL_BAUD:

SERIAL_BAUD = 38400 # or 57600 if you have changed default setting in Babyware