Skip to content

plan9perl setup.rc script update #14843

plan9perl setup.rc script update

plan9perl setup.rc script update #14843

Workflow file for this run

#
# Run the tests on various build configurations and various operating systems.
#
# In the Perl/perl5 repository all jobs are run by default.
#
# To enable the testing on a fork of the perl5 repository you first need to
# enable GitHub Actions in 'Settings' -> 'Actions' -> 'General'.
#
# When actions are enabled then it will - by default - run the 'Sanity Check' job.
#
# Testing other build configurations is controlled by the 'Secrets' configured
# in 'Settings' -> 'Secrets and Variables' -> 'Actions' -> 'Variables':
# - DO_EXTENDED_TESTING: when this var exists and is set to a true value then
# all build configurations are tested;
# - CI_SKIP_SANITY: if set to a true value then most of the 'Sanity Check' job is skipped;
# - CI_FORCE_LINUX: if set to a true value: run the 'linux' job;
# - CI_FORCE_LINUX_I386: if set to a true value: run the 'linux-i386' job;
# - CI_FORCE_INSTALL: if set to a true value: run the 'install' job;
# - CI_FORCE_MACOS: if set to a true value: run the 'smoke-macos-14' job;
# - CI_FORCE_MSVC142: if set to a true value: run the 'windows-msvc142' job;
# - CI_FORCE_MINGW64: if set to a true value: run the 'mingw64' job;
# - CI_FORCE_CYGWIN: if set to a true value: run the 'cygwin' job;
# - CI_FORCE_MINITEST: if set to a true value: run the 'miniperl' job;
# - CI_FORCE_ASAN: if set to a true value: run the 'ASAN' job;
# - CI_FORCE_PERL_UNICODE: if set to a true value: run the 'PERL_UNICODE' job;
# - CI_FORCE_DIST_MODULES: if set to a true value: run the 'dist-modules' job;
#
# For the purpose of this workflow:
# - 'true value': any value that is not false
# - 'false value':
# * empty string
# * string containing only spaces (i.e. ' ')
# * string containing only zeroes (i.e. '0', '0000')
# * string containing only spaces and zeroes (i.e. '0 0 0 0')
#
# Example: if you only want to run tests on cygwin then you can set:
# - DO_EXTENDED_TESTING=0
# - CI_SKIP_SANITY=1
# - CI_FORCE_CYGWIN=1
# - (and all other CI_FORCE_... vars to 0)
#
name: testsuite
on:
push:
branches:
- "**"
tags-ignore:
- "*"
pull_request:
# I don't think that we can (safely) set TEST_JOBS=2 in the global environment,
# because on Win32 the various Makefile's `test` target is actually ./harness,
# and it would (attempt to) honour the $ENV{TEST_JOBS} setting. This won't end
# nicely as unlike BSD (etc), Win32 sockets can drop data at process exit, which
# would cause missing TAP and hence spurious test failures.
env:
PERL_SKIP_TTY_TEST: 1
CONTINUOUS_INTEGRATION: 1
permissions:
contents: read # to fetch code
jobs:
# ___ _ ___ __ _ _
# / __|_ __ ___| |_____ |_ _|_ _ / _|___ _ _ _ __ __ _| |_(_)___ _ _ ___
# \__ \ ' \/ _ \ / / -_) | || ' \| _/ _ \ '_| ' \/ _` | _| / _ \ ' \(_-<
# |___/_|_|_\___/_\_\___| |___|_||_|_| \___/_| |_|_|_\__,_|\__|_\___/_||_/__/
involved_authors_debug:
runs-on: ubuntu-latest
if: ( github.event.pull_request.head.repo.full_name == 'Perl/perl5' || github.repository == 'Perl/perl5' ) && github.base_ref != ''
continue-on-error: true
steps:
- name: Dump GitHub context
env:
GITHUB_CONTEXT: ${{ toJson(github) }}
run: echo "$GITHUB_CONTEXT"
- uses: actions/checkout@v4
with:
fetch-depth: 1000
- name: git setup
run: |
echo "Pull request authors"
echo "# git merge-base origin/${BASE_REF} HEAD"
git config diff.renameLimit 999999
git fetch --depth=1000 origin ${BASE_REF}
env:
BASE_REF: ${{ github.base_ref }}
- name: Involved authors
run: |
echo "Authors from origin/${BASE_REF}..${SHA}^2"
echo "specifically: $(git rev-parse origin/${BASE_REF})..$(git rev-parse ${SHA}^2)"
git log --pretty=format:"Author: %aN <%aE>" origin/${BASE_REF}..${SHA}^2 | sort | uniq -c
env:
BASE_REF: ${{ github.base_ref }}
SHA: ${{ github.sha }}
# ___ _ _ ___ _ _
# / __| __ _ _ _ (_) |_ _ _ / __| |_ ___ __| |__
# \__ \/ _` | ' \| | _| || | | (__| ' \/ -_) _| / /
# |___/\__,_|_||_|_|\__|\_, | \___|_||_\___\__|_\_\
# |__/
# ascii art small font from https://ascii.co.uk/text
# "sanity_check" tests -Dusethreads without -DDEBUGGING
# "linux-i386" tests -Uusethreads without -DDEBUGGING
# All builds in the "linux" matrix test with -DDEBUGGING
#
# "sanity_check" sets `fetch-depth: 0` so that it does a git clone
# with full history, and hence can run t/porting/cmp_version.t etc
#
# The git-related tests require full history, but we only need to run
# them once (they aren't platform specific). Hence leave the others
# with the default setting (1), which performs a shallow clone. In
# these shallow checkouts, the git related porting tests skip (or
# rapidly pass), but they won't fail spuriously.
#
# TODO - Now that we do not use secrets and instead use vars for the
# control of which tests we run (due to the way secrets are elided
# from the output), we can simplify the shell code below. The
# following url includes discussion on what next steps we could take
# to simplify the complexity of this code.
#
# https://github.com/Perl/perl5/pull/20845#issuecomment-1440676127
#
sanity_check:
name: "Sanity: Linux -Dusethreads"
runs-on: ubuntu-latest
timeout-minutes: 120
outputs:
run_all_jobs: ${{ steps.check_extended_testing.outputs.run_all_jobs }}
ci_force_linux: ${{ steps.ci_config.outputs.ci_force_linux }}
ci_force_linux_i386: ${{ steps.ci_config.outputs.ci_force_linux_i386 }}
ci_force_install: ${{ steps.ci_config.outputs.ci_force_install }}
ci_force_macos: ${{ steps.ci_config.outputs.ci_force_macos }}
ci_force_msvc142: ${{ steps.ci_config.outputs.ci_force_msvc142 }}
ci_force_mingw64: ${{ steps.ci_config.outputs.ci_force_mingw64 }}
ci_force_cygwin: ${{ steps.ci_config.outputs.ci_force_cygwin }}
ci_force_minitest: ${{ steps.ci_config.outputs.ci_force_minitest }}
ci_force_asan: ${{ steps.ci_config.outputs.ci_force_asan }}
ci_force_perl_unicode: ${{ steps.ci_config.outputs.ci_force_perl_unicode }}
ci_force_dist_modules: ${{ steps.ci_config.outputs.ci_force_dist_modules }}
steps:
- name: Dump GitHub context
env:
GITHUB_CONTEXT: ${{ toJson(github) }}
run: echo "$GITHUB_CONTEXT"
- name: Check what-to-do
id: ci_config
env:
CI_SKIP_SANITY: ${{ vars.CI_SKIP_SANITY }}
CI_FORCE_LINUX: ${{ vars.CI_FORCE_LINUX }}
CI_FORCE_LINUX_I386: ${{ vars.CI_FORCE_LINUX_I386 }}
CI_FORCE_INSTALL: ${{ vars.CI_FORCE_INSTALL }}
CI_FORCE_MACOS: ${{ vars.CI_FORCE_MACOS }}
CI_FORCE_MSVC142: ${{ vars.CI_FORCE_MSVC142 }}
CI_FORCE_MINGW64: ${{ vars.CI_FORCE_MINGW64 }}
CI_FORCE_CYGWIN: ${{ vars.CI_FORCE_CYGWIN }}
CI_FORCE_MINITEST: ${{ vars.CI_FORCE_MINITEST }}
CI_FORCE_ASAN: ${{ vars.CI_FORCE_ASAN }}
CI_FORCE_PERL_UNICODE: ${{ vars.CI_FORCE_PERL_UNICODE }}
CI_FORCE_DIST_MODULES: ${{ vars.CI_FORCE_DIST_MODULES }}
run: |
echo '::echo::on'
[[ -n "${CI_SKIP_SANITY}" ]] && [[ "${CI_SKIP_SANITY%[!0 ]*}" != "${CI_SKIP_SANITY}" ]] && echo "ci_skip_sanity=true" >> "$GITHUB_OUTPUT"
[[ -n "${CI_FORCE_LINUX}" ]] && [[ "${CI_FORCE_LINUX%[!0 ]*}" != "${CI_FORCE_LINUX}" ]] && echo "ci_force_linux=true" >> "$GITHUB_OUTPUT"
[[ -n "${CI_FORCE_LINUX_I386}" ]] && [[ "${CI_FORCE_LINUX_I386%[!0 ]*}" != "${CI_FORCE_LINUX_I386}" ]] && echo "ci_force_linux_i386=true" >> "$GITHUB_OUTPUT"
[[ -n "${CI_FORCE_INSTALL}" ]] && [[ "${CI_FORCE_INSTALL%[!0 ]*}" != "${CI_FORCE_INSTALL}" ]] && echo "ci_force_install=true" >> "$GITHUB_OUTPUT"
[[ -n "${CI_FORCE_MACOS}" ]] && [[ "${CI_FORCE_MACOS%[!0 ]*}" != "${CI_FORCE_MACOS}" ]] && echo "ci_force_macos=true" >> "$GITHUB_OUTPUT"
[[ -n "${CI_FORCE_MSVC142}" ]] && [[ "${CI_FORCE_MSVC142%[!0 ]*}" != "${CI_FORCE_MSVC142}" ]] && echo "ci_force_msvc142=true" >> "$GITHUB_OUTPUT"
[[ -n "${CI_FORCE_MINGW64}" ]] && [[ "${CI_FORCE_MINGW64%[!0 ]*}" != "${CI_FORCE_MINGW64}" ]] && echo "ci_force_mingw64=true" >> "$GITHUB_OUTPUT"
[[ -n "${CI_FORCE_CYGWIN}" ]] && [[ "${CI_FORCE_CYGWIN%[!0 ]*}" != "${CI_FORCE_CYGWIN}" ]] && echo "ci_force_cygwin=true" >> "$GITHUB_OUTPUT"
[[ -n "${CI_FORCE_MINITEST}" ]] && [[ "${CI_FORCE_MINITEST%[!0 ]*}" != "${CI_FORCE_MINITEST}" ]] && echo "ci_force_minitest=true" >> "$GITHUB_OUTPUT"
[[ -n "${CI_FORCE_ASAN}" ]] && [[ "${CI_FORCE_ASAN%[!0 ]*}" != "${CI_FORCE_ASAN}" ]] && echo "ci_force_asan=true" >> "$GITHUB_OUTPUT"
[[ -n "${CI_FORCE_PERL_UNICODE}" ]] && [[ "${CI_FORCE_PERL_UNICODE%[!0 ]*}" != "${CI_FORCE_PERL_UNICODE}" ]] && echo "ci_force_perl_unicode=true" >> "$GITHUB_OUTPUT"
[[ -n "${CI_FORCE_DIST_MODULES}" ]] && [[ "${CI_FORCE_DIST_MODULES%[!0 ]*}" != "${CI_FORCE_DIST_MODULES}" ]] && echo "ci_force_dist_modules=true" >> "$GITHUB_OUTPUT"
echo '::echo::off'
- name: Install System dependencies
if: steps.ci_config.outputs.ci_skip_sanity != 'true'
run: |
sudo apt-get update
sudo apt-get install -y libgdbm-dev libdb-dev
- uses: actions/checkout@v4
with:
fetch-depth: 0
if: steps.ci_config.outputs.ci_skip_sanity != 'true'
- name: git cfg
if: steps.ci_config.outputs.ci_skip_sanity != 'true'
run: |
git config diff.renameLimit 999999
- name: Configure
if: steps.ci_config.outputs.ci_skip_sanity != 'true'
run: |
./Configure -des -Dusedevel ${CONFIGURE_ARGS} -Dprefix="$HOME/perl-blead"
env:
CONFIGURE_ARGS: "-Dusethreads"
- name: Build
if: steps.ci_config.outputs.ci_skip_sanity != 'true'
id: build
run: |
make -j2 test_prep
- name: Show Config
if: steps.ci_config.outputs.ci_skip_sanity != 'true'
run: |
./perl -Ilib -V
./perl -Ilib -e 'use Config; print Config::config_sh'
- name: Run Tests (excluding t/porting)
if: steps.ci_config.outputs.ci_skip_sanity != 'true'
run: |
TEST_JOBS=2 ./perl t/harness -nre='^porting/'
# Set a variable for dependent jobs to signal if full testsuite is enabled
- name: "Check if DO_EXTENDED_TESTING is set"
id: check_extended_testing
env:
DO_EXTENDED_TESTING: ${{ vars.DO_EXTENDED_TESTING }}
CURRENT_REPOSITORY: ${{ github.repository }}
run: |
if [[ "${CURRENT_REPOSITORY}" = 'Perl/perl5' ]]; then
echo "Running all test jobs"
echo "run_all_jobs=true" >> "$GITHUB_OUTPUT"
elif [[ -n "${DO_EXTENDED_TESTING}" ]] && [[ "${DO_EXTENDED_TESTING%[!0 ]*}" != "${DO_EXTENDED_TESTING}" ]]; then
echo "Running all test jobs"
echo "run_all_jobs=true" >> "$GITHUB_OUTPUT"
else
echo "Skipping extended test jobs."
echo "run_all_jobs=false" >> "$GITHUB_OUTPUT"
fi
- name: Run Porting Tests (t/porting)
if: (! cancelled() && steps.ci_config.outputs.ci_skip_sanity != 'true' && steps.build.outcome == 'success')
run: |
TEST_JOBS=2 ./perl t/harness -re='^porting/'
# _ _
# | (_)_ _ _ ___ __
# | | | ' \ || \ \ /
# |_|_|_||_\_,_/_\_\
linux:
runs-on: ubuntu-latest
timeout-minutes: 120
needs: sanity_check
if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_linux == 'true'))
strategy:
fail-fast: false
matrix:
# exercise a variety of build options
# threads often cause build issues
CONFIGURE_ARGS:
- "-Uusethreads"
#- "-Dusethreads" # already tested above by sanity_check
#- "-Duseshrplib -Dusesitecustomize -Duselongdouble" # tested below by install
- "-Duseshrplib -Dusequadmath -Dusecbacktrace -Dusethreads"
- "-Duserelocatableinc"
- "-Dcc='clang'"
- "-Dcc='g++'"
- "-Accflags=-DSILENT_NO_TAINT_SUPPORT"
- "-Accflags=-DNO_TAINT_SUPPORT"
- "-DDEBUGGING -Accflags=-DPERL_RC_STACK"
- "-Uusedl"
steps:
- name: Install System dependencies
run: |
sudo apt-get update
sudo apt-get install -y libgdbm-dev libdb-dev
- uses: actions/checkout@v4
- name: git cfg
run: |
git config diff.renameLimit 999999
- name: Configure
run: |
./Configure -des -Dusedevel ${{ matrix.CONFIGURE_ARGS }} -Dprefix="$HOME/perl-blead" -DDEBUGGING
- name: Build
run: |
MALLOC_PERTURB_=254 MALLOC_CHECK_=3 make -j2 test_prep
- name: Show Config
run: |
LD_LIBRARY_PATH=`pwd` ./perl -Ilib -V
LD_LIBRARY_PATH=`pwd` ./perl -Ilib -e 'use Config; print Config::config_sh'
- name: Run Tests
run: |
LD_LIBRARY_PATH=`pwd` MALLOC_PERTURB_=254 MALLOC_CHECK_=3 TEST_JOBS=2 ./perl t/harness
- name: git clean
run: |
git clean -dxf
- name: manicheck
run: |
perl Porting/manicheck --exitstatus
# _ _ _ _____ ___ __
# | (_)_ __ _ ___ __ (_)___ / ( _ ) / /_
# | | | '_ \| | | \ \/ /____| | |_ \ / _ \| '_ \
# | | | | | | |_| |> <_____| |___) | (_) | (_) |
# |_|_|_| |_|\__,_/_/\_\ |_|____/ \___/ \___/
linux-i386:
name: "linux i386/ubuntu"
runs-on: ubuntu-latest
timeout-minutes: 120
needs: sanity_check
if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_linux_i386 == 'true'))
# https://hub.docker.com/r/i386/ubuntu/
container:
image: i386/ubuntu:latest
strategy:
fail-fast: false
matrix:
CONFIGURE_ARGS:
- "-Dusedevel"
steps:
- name: Install System dependencies
run: |
apt-get update
apt-get install -y build-essential git-core libgdbm-dev libdb-dev
# actions/checkout@v2 and higher don't work in a i386 container:
# the GitHub runner uses `node` that is installed on the host inside the container.
# The host is (likely) running x86_64 and using a binary build for x86_64 inside a
# i386 container just doesn't work.
# Upstream reports:
# - https://github.com/actions/checkout/issues/334#issuecomment-1241306390
# - https://github.com/actions/runner/issues/2115
#
# actions/checkout@v1 does work inside a container but that doesn't work
# so well with a shallow clone (`fetch-depth: 1`). It contains a race condition
# and makes it impossible to re-run an older job.
# Upstream report:
# - https://github.com/actions/runner/issues/2357
- name: Clone repo
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
run: |
git config --global --add safe.directory "$GITHUB_WORKSPACE"
git init
git remote add origin "https://$GITHUB_ACTOR:[email protected]/$GITHUB_REPOSITORY"
git config --local gc.auto 0
git fetch origin --depth=1 "$GITHUB_SHA"
git checkout "$GITHUB_SHA"
- name: git cfg
run: |
git config diff.renameLimit 999999
- name: Configure
run: |
./Configure -des -Dusedevel ${{ matrix.CONFIGURE_ARGS }} -Dprefix="$HOME/perl-blead"
- name: Build
run: |
MALLOC_PERTURB_=254 MALLOC_CHECK_=3 make -j2
- name: Show Config
run: |
LD_LIBRARY_PATH=`pwd` ./perl -Ilib -V
LD_LIBRARY_PATH=`pwd` ./perl -Ilib -e 'use Config; print Config::config_sh'
# Leaving this as `make test` so that we test the `test` target on regular
# Linux.
# linux-i386 is just one job (not a matrix)
- name: Run Tests
run: |
MALLOC_PERTURB_=254 MALLOC_CHECK_=3 make -j2 test
# _ _ _ _ _
# _ __ ___ __ _| | _____ (_)_ __ ___| |_ __ _| | |
# | '_ ` _ \ / _` | |/ / _ \ | | '_ \/ __| __/ _` | | |
# | | | | | | (_| | < __/ | | | | \__ \ || (_| | | |
# |_| |_| |_|\__,_|_|\_\___| |_|_| |_|___/\__\__,_|_|_|
install:
runs-on: ubuntu-latest
timeout-minutes: 120
needs: sanity_check
if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_install == 'true'))
steps:
- name: Install System dependencies
run: |
sudo apt-get update
sudo apt-get install -y libgdbm-dev libdb-dev
- uses: actions/checkout@v4
- name: git cfg
run: |
git config diff.renameLimit 999999
- name: Configure
run: |
./Configure -des -Dusedevel -Duseshrplib -Dusesitecustomize -Duselongdouble -Dprefix="$HOME/perl-blead" -DDEBUGGING
- name: Build
run: |
MALLOC_PERTURB_=254 MALLOC_CHECK_=3 make -j2
- name: Show Config
run: |
LD_LIBRARY_PATH=`pwd` ./perl -Ilib -V
LD_LIBRARY_PATH=`pwd` ./perl -Ilib -e 'use Config; print Config::config_sh'
- name: Run Tests
run: |
MALLOC_PERTURB_=254 MALLOC_CHECK_=3 TEST_JOBS=2 make -j2 test_harness
- name: Install
run: |
MALLOC_PERTURB_=254 MALLOC_CHECK_=3 TEST_JOBS=2 make -j2 install
# This will only pass if libperl.so and Config.pm are correctly installed:
- name: Show Install
run: |
./perl -V
# This can't run in parallel
- name: distclean
run: |
MALLOC_PERTURB_=254 MALLOC_CHECK_=3 make distclean
- name: manicheck
run: |
perl Porting/manicheck --exitstatus
# ___ ___
# _ __ __ _ __ / _ \/ __|
# | ' \/ _` / _| (_) \__ \
# |_|_|_\__,_\__|\___/|___/
smoke-macos-14:
name: "macOS (Sonoma) 14"
runs-on: macos-14
timeout-minutes: 120
needs: sanity_check
if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_macos == 'true'))
strategy:
fail-fast: false
matrix:
CONFIGURE_ARGS:
- "-Uusethreads"
- "-Duseithreads -Duseshrplib"
steps:
- uses: actions/checkout@v4
- name: Configure
run: |
sh ./Configure -des -Dusedevel ${{ matrix.CONFIGURE_ARGS }}
- name: Build
run: |
make -j2 test_prep
- name: Show Config
run: |
./perl -Ilib -V
./perl -Ilib -e 'use Config; print Config::config_sh'
- name: Run Tests
run: |
TEST_JOBS=2 ./perl t/harness
# _ _
# __ __ _(_)_ _ __| |_____ __ _____
# \ V V / | ' \/ _` / _ \ V V (_-<
# \_/\_/|_|_||_\__,_\___/\_/\_//__/
windows-msvc142:
name: "Windows msvc142"
runs-on: windows-2019
timeout-minutes: 120
needs: sanity_check
if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_msvc142 == 'true'))
steps:
- run: git config --global core.autocrlf false
- uses: actions/checkout@v4
#- name: Install clcache
# shell: cmd
# run: |
# curl -L https://github.com/frerich/clcache/releases/download/v4.2.0/clcache.4.2.0.nupkg --output clcache.4.2.0.nupkg
# choco install clcache --source=.
#- name: find home directory
# shell: cmd
# run: |
# set
#- name: C compiler cache
# id: clcache
# uses: actions/cache@v1
# with:
# path: $HOME\clcache
# key: ${{ runner.os }}-x64
#- name: Set up Perl build environment
# # pushd "C:\Program Files (x86)\Microsoft Visual Studio\Installer\"
# # for /f "delims=" %%x in ('.\vswhere.exe -latest -property InstallationPath') do set VSPATH=%%x
# # popd
# # call "%VSPATH%\VC\Auxiliary\Build\vcvarsall.bat" x64
# #run: |
- name: Build
shell: cmd
run: |
call "C:\Program Files (x86)\Microsoft Visual Studio\2019\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
cd win32
nmake CCTYPE=MSVC142 CFG=Debug
- name: Show Config
shell: cmd
run: |
.\perl.exe -V
.\perl.exe -e "use Config; print Config::config_sh"
- name: Run Tests
shell: cmd
run: |
call "C:\Program Files (x86)\Microsoft Visual Studio\2019\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
cd win32
nmake CCTYPE=MSVC142 CFG=Debug test
# _ __ _ _
# _ __ ___ (_)_ __ __ ___ __/ /_ | || |
# | '_ ` _ \| | '_ \ / _` \ \ /\ / / '_ \| || |_
# | | | | | | | | | | (_| |\ V V /| (_) |__ _|
# |_| |_| |_|_|_| |_|\__, | \_/\_/ \___/ |_|
# |___/
mingw64:
name: "Windows mingw64"
runs-on: windows-2019
timeout-minutes: 120
needs: sanity_check
if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_mingw64 == 'true'))
steps:
- run: git config --global core.autocrlf false
- uses: actions/checkout@v4
- name: Install mingw-64
run: |
mkdir C:\perl_ci && cd C:\perl_ci
curl -L https://github.com/brechtsanders/winlibs_mingw/releases/download/13.1.0-16.0.5-11.0.0-ucrt-r5/winlibs-x86_64-posix-seh-gcc-13.1.0-mingw-w64ucrt-11.0.0-r5.zip -o mingw.zip
$expected_hash = '418E8A0175640E617EC6F6639BCA8D3AEDDB6A108391EAF312D1351D19375958'
$file_hash = (Get-FileHash mingw.zip -Algorithm SHA256).Hash
if ($file_hash -ne $expected_hash) {
throw "Wrong hash. Got ${file_hash}, expected ${expected_hash}"
}
tar -xf mingw.zip && rm mingw.zip
copy mingw64\bin\mingw32-make.exe mingw64\bin\gmake.exe
echo 'C:\perl_ci\mingw64\bin' >> $env:GITHUB_PATH
- name: Host perl -V
run: |
perl -V
- name: gcc --version
run: gcc --version
- name: Build
shell: cmd
run: |
cd win32
gmake CCHOME=C:\perl_ci\mingw64 CFG=Debug -f GNUMakefile -j2
- name: Show Config
shell: cmd
run: |
.\perl.exe -V
.\perl.exe -e "use Config; print Config::config_sh"
- name: Run Tests
shell: cmd
run: |
cd win32
set HARNESS_OPTIONS=j2
gmake CCHOME=C:\perl_ci\mingw64 CFG=Debug -f GNUMakefile test
# _
# ___ _ _ __ ___ _(_)_ __
# / __| | | |/ _` \ \ /\ / / | '_ \
# | (__| |_| | (_| |\ V V /| | | | |
# \___|\__, |\__, | \_/\_/ |_|_| |_|
# |___/ |___/
cygwin:
name: "cygwin"
runs-on: windows-2019
timeout-minutes: 120
needs: sanity_check
if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_cygwin == 'true'))
steps:
# we use Cygwin git, so no need to configure git here.
- name: Set up Cygwin
uses: cygwin/cygwin-install-action@v3
with:
packages: >
cygwin-devel gcc-core gcc-g++ make w32api-headers binutils libtool
git ccache libgdbm-devel libdb-devel
install-dir: ${{ github.workspace }}\cygwin
- name: Check out using Cygwin git, to ensure correct file permissions
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
PATH: /usr/bin:/bin
SHELLOPTS: igncr
shell: sh
run: |
git config --global core.autocrlf false
mkdir -p ~
cd ~
git init work
cd work
git remote add origin "https://$GITHUB_ACTOR:[email protected]/$GITHUB_REPOSITORY"
git config --local gc.auto 0
git fetch origin --depth=1 "$GITHUB_SHA"
git checkout "$GITHUB_SHA"
- name: Configure
shell: sh
env:
PATH: /usr/bin:/bin
SHELLOPTS: igncr
run: |
cd ~/work
set +e
./Configure -des -Dusedevel -Doptimize=-g -DDEBUGGING -Astatic_ext=I18N/Langinfo || exit 1
- name: Build
shell: sh
env:
PATH: /usr/bin:/bin
SHELLOPTS: igncr
run: |
cd ~/work
make -j2 test_prep
- name: Show Config
shell: sh
env:
PATH: /usr/bin:/bin
SHELLOPTS: igncr
run: |
cd ~/work
./perl -Ilib -V
./perl -Ilib -e 'use Config; print Config::config_sh'
- name: Run Tests
shell: sh
env:
PATH: /usr/bin:/bin
SHELLOPTS: igncr
# Descend far enough down the cygwin yak warren, and one discovers that
# hints/cygwin.sh sets ldlibpthname=PATH
# Meaning that the Makefile variable LDLIBPTH is "PATH=..."
# Meaning that the command to invoke ./runtests is PATH=... ./perl.exe
# *Not* LD_LIBRARY_PATH or anything conventionally unix-like
#
# Cygwin is the slowest CI test. Breaking the abstractions described
# above/committing this DRY violation means that we avoid needing to
# `make -j2 test` to invoke t/TEST, and avoiding that likely saves us
# about 40 seconds, which is nearly 1% of the total wallclock time for
# complete all CI runs.
run: |
cd ~/work
PATH=`pwd`:.:$PATH TEST_JOBS=2 ./perl.exe t/harness
# _ _ _ _
# _ __ ___ (_)_ __ (_) |_ ___ ___| |_
# | '_ ` _ \| | '_ \| | __/ _ \/ __| __|
# | | | | | | | | | | | || __/\__ \ |_
# |_| |_| |_|_|_| |_|_|\__\___||___/\__|
miniperl:
name: "minitest"
runs-on: ubuntu-latest
timeout-minutes: 120
needs: sanity_check
if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_minitest == 'true'))
outputs:
run_all_jobs: ${{ steps.check_extended_testing.outputs.run_all_jobs }}
steps:
- name: Dump GitHub context
env:
GITHUB_CONTEXT: ${{ toJson(github) }}
run: echo "$GITHUB_CONTEXT"
- name: Install System dependencies
run: |
sudo apt-get update
sudo apt-get install -y libgdbm-dev libdb-dev
- uses: actions/checkout@v4
- name: git cfg
run: |
git config diff.renameLimit 999999
- name: manicheck
run: |
perl Porting/manicheck --exitstatus
- name: Configure
run: |
./Configure -des -Dusedevel -Dprefix="$HOME/perl-blead"
- name: Build
run: |
make -j2 minitest_prep
- name: Show Config
run: |
./miniperl -Ilib -V
./miniperl -Ilib -e 'use Config; print Config::config_sh'
- name: Run Tests
run: |
make minitest_notty
# _ ____ _ _ _
# / \ / ___| / \ | \ | |
# / _ \ \___ \ / _ \ | \| |
# / ___ \ ___) / ___ \| |\ |
# /_/ \_\____/_/ \_\_| \_|
# Life is pain, highness. Anyone who says differently is selling something.
ASAN:
name: "ASAN"
runs-on: ubuntu-latest
timeout-minutes: 120
needs: sanity_check
if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_asan == 'true'))
strategy:
matrix:
# -DPURIFY disables arenas and mallocs everything individually. With
# ASAN or similar it's the real torture test. However, we also need to
# test that the arena code doesn't have any goofs.
CONFIGURE_ARGS:
- "-Accflags=-DPURIFY"
- "-DDEBUGGING"
- "-Dusethreads"
steps:
- name: Install System dependencies
run: |
sudo apt-get update
sudo apt-get install -y libgdbm-dev libdb-dev
- uses: actions/checkout@v4
- name: git cfg
run: |
git config diff.renameLimit 999999
- name: Configure
run: |
./Configure -des -Dusedevel -Dcc="clang -fsanitize=address" -Dld="clang -fsanitize=address" ${{ matrix.CONFIGURE_ARGS }} -Dprefix="$HOME/perl-blead"
- name: Build
run: |
PERL_DESTRUCT_LEVEL=2 make -j2 test_prep
- name: Show Config
run: |
ASAN_OPTIONS=detect_leaks=0 ./perl -Ilib -V
ASAN_OPTIONS=detect_leaks=0 ./perl -Ilib -e 'use Config; print Config::config_sh'
- name: Run Tests
# LeakSanitizer is disabled because it randomly crashes, see [gh #19189]
run: |
ASAN_OPTIONS=detect_leaks=0 PERL_DESTRUCT_LEVEL=2 TEST_JOBS=2 ./perl t/harness
# ____ _____ ____ _ _ _ _ _ ___ ____ ___ ____ _____
# | _ \| ____| _ \| | | | | | \ | |_ _/ ___/ _ \| _ \| ____|
# | |_) | _| | |_) | | | | | | \| || | | | | | | | | | _|
# | __/| |___| _ <| |___ | |_| | |\ || | |__| |_| | |_| | |___
# |_| |_____|_| \_\_____|___\___/|_| \_|___\____\___/|____/|_____|
# |_____|
# To the pain!
PERL_UNICODE:
name: "PERL_UNICODE"
runs-on: ubuntu-latest
timeout-minutes: 120
needs: sanity_check
if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_perl_unicode == 'true'))
strategy:
matrix:
# There are many many combinations we *could* test. These two are likely
# to give the best overview - "basic sanity" and "everything maxed out"
CONFIGURE_ARGS:
- "-Uusethreads"
- "-Dusethreads -Accflags=-DPURIFY -Dcc='gcc -fsanitize=address' -Dld='gcc -fsanitize=address'"
steps:
- name: Install System dependencies
run: |
sudo apt-get update
sudo apt-get install -y libgdbm-dev libdb-dev
- uses: actions/checkout@v4
- name: git cfg
run: |
git config diff.renameLimit 999999
- name: Show Locales
run: locale -a
- name: Configure
run: |
./Configure -des -Dusedevel ${{ matrix.CONFIGURE_ARGS }} -Dprefix="$HOME/perl-blead"
- name: Build
run: |
LC_ALL=en_US.UTF-8 PERL_UNICODE="" PERL_DESTRUCT_LEVEL=2 make -j2 test_prep
- name: Show Config
run: |
ASAN_OPTIONS=detect_leaks=0 ./perl -Ilib -V
ASAN_OPTIONS=detect_leaks=0 ./perl -Ilib -e 'use Config; print Config::config_sh'
- name: Run Tests
# LeakSanitizer is disabled because it randomly crashes, see [gh #19189]
run: |
ASAN_OPTIONS=detect_leaks=0 PERL_DESTRUCT_LEVEL=2 LC_ALL=en_US.UTF-8 PERL_UNICODE="" TEST_JOBS=2 ./perl t/harness
# _ _ _ _ _
# __| (_)___| |_ _ __ ___ ___ __| |_ _| | ___ ___
# / _` | / __| __|____| '_ ` _ \ / _ \ / _` | | | | |/ _ \/ __|
# | (_| | \__ \ ||_____| | | | | | (_) | (_| | |_| | | __/\__ \
# \__,_|_|___/\__| |_| |_| |_|\___/ \__,_|\__,_|_|\___||___/
dist-modules:
name: dist ${{ matrix.os.label }} ${{ matrix.perl-version }} ${{ matrix.threads.label }}
needs: sanity_check
runs-on: ${{ matrix.os.id }}
if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_dist_modules == 'true'))
env:
# some plugins still needs this to run their tests...
# these don't really matter, but might later
PERL_USE_UNSAFE_INC: 0
AUTHOR_TESTING: 1
AUTOMATED_TESTING: 1
RELEASE_TESTING: 1
NO_NETWORK_TESTING: 1
strategy:
fail-fast: false
matrix:
# once some failures are resolved we may be able to add Windows to this
os:
- id: ubuntu-latest
label: Linux
perl-version:
- '5.38'
- '5.24'
- '5.10'
- '5.8'
threads:
- enable: true
label: -Dusethreads
- enable: false
label: -Uusethreads
steps:
- uses: actions/checkout@v4
- name: Set up perl
uses: shogo82148/[email protected]
with:
perl-version: ${{ matrix.perl-version }}
multi-thread: ${{ matrix.threads.id }}
install-modules:
ExtUtils::MakeMaker
Perl::OSType
Scalar::Util
Socket
version
- name: perl -V
run: perl -V
- name: Build and test dist modules
run:
perl Porting/test-dist-modules.pl -continue
dist-modules-sys-macos:
name: "Test dist/ modules on MacOS system perl"
needs: sanity_check
runs-on: macos-latest
if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_dist_modules == 'true'))
env:
# some plugins still needs this to run their tests...
# these don't really matter, but might later
PERL_USE_UNSAFE_INC: 0
AUTHOR_TESTING: 1
AUTOMATED_TESTING: 1
RELEASE_TESTING: 1
NO_NETWORK_TESTING: 1
strategy:
fail-fast: false
steps:
- uses: actions/checkout@v4
- name: perl -V
run: /usr/bin/perl -V
- name: Build and test dist modules
run:
/usr/bin/perl Porting/test-dist-modules.pl -continue