Skip to content

Using FX SaberOS

Jump to bottom
jbkuma edited this page Apr 1, 2017 · 2 revisions

There are two methods of controlling the saber, each has it's advantages and disadvantages:

  • Two Button Mode
    • Allows more commands to be made by buttons
    • simpler menu navigation
    • requires two buttons to be installed instead
  • Single Button Mode
    • Only requires one button!
    • click combinations can be more complicated and less intuitive
    • fewer commands available
  1. Introduction
  2. Features
  3. Getting Started
    1. Setting up Arduino
    2. Quick-Start FXSOS
    3. Default Pins
    4. Components
    5. Wiring
    6. Prepare SD Card
  4. Configuration
    1. Calibrating the MPU
    2. Clash Method
    3. Swing Method
    4. Blade Type
      1. RGB LED
      2. Pixel Blade
      3. String Blade
    5. Sound
      1. Preparing Sounds
      2. Soundfont.h
    6. FlexiConfig
    7. Reading Battery Level
  5. Building Your Saber
    1. Building a Pixel Blade
    2. Building a String Blade
  6. Using FX-SaberOS
    1. Two Button Mode
    2. Single Button Mode
    3. Gravity Color
    4. Deep Sleep
  7. Resources
  8. Troubleshooting
Clone this wiki locally