[DOCS-2262] Updates to Alletra 4140 Docs (#410)

hardware-guide/hpe-alletra-4140/front-internal-drives.md

@@ -29,14 +29,9 @@ For more information, see [49-Bay Drive Drawer 1 and 2 Numbering](https://suppor
 
 
 ## NVMe Boot Drive
-The NVMe boot drive is located inside the HPE NS204i-u Hot Plug Boot Optimized Storage Device.
-
-{{site.data.alerts.important}}
-<ul>
-  <li>For help with locating the NS204i-u device and with replacement procedures, <a href="https://www.hpe.com/us/en/contact-hpe.html">contact HPE support</a>.</li>
-  <li>Before you remove the boot drive, {{site.contactQumuloCare}} for additional instructions.</li>
-</ul>
-{{site.data.alerts.end}}
+The two NVMe boot drives are located inside the HPE NS204i-u Hot Plug Boot Optimized Storage Device.
+
+{% include important.html content="For help with locating the NS204i-u device and with replacement procedures, [contact HPE Support](https://www.hpe.com/us/en/contact-hpe.html)." %}
 
 For more information, see the following HPE documentation:
 

hardware-guide/hpe-alletra-4140/getting-started.md

@@ -6,8 +6,12 @@ sidebar: hardware_guide_sidebar
 platform: all4140
 ---
 
-{% capture seeMore %}For information about installing your node and replacing hardware components, see [{{site.all4140}} System Maintenance and Service Guide](https://support.hpe.com/hpesc/public/docDisplay?docId=sd00003806en_us&docLocale=en_US) and [{{site.all4140}} Setup and Installation Guide](https://support.hpe.com/hpesc/public/docDisplay?docId=sd00003805en_us&docLocale=en_US in the HPE documentation.){% endcapture %}
-{% include tip.html content=seeMore %}
+{{site.data.alerts.note}}
+<ul>
+   <li>For information about installing your node and replacing hardware components, see <a href="https://support.hpe.com/hpesc/public/docDisplay?docId=sd00003806en_us&docLocale=en_US">{{site.all4140}} System Maintenance and Service Guide</a> and <a href="https://support.hpe.com/hpesc/public/docDisplay?docId=sd00003805en_us&docLocale=en_US">{{site.all4140}} Setup and Installation Guide</a> in the HPE documentation.</li>
+   <li>Qumulo Core is firmware-agnostic. We recommend managing your nodes' firmware by following recommendations from HPE.</li>
+</ul>
+{{site.data.alerts.end}}
 
 ## Prerequisites
 {{site.xrefUSBinstaller}}

hardware-guide/supermicro-a-plus-asg-2015s-e1cr24l/replacing-hardware-components.md

@@ -1,32 +1,25 @@
 ---
 title: "Replacing Hardware Components in Your Supermicro A+ ASG-2015S-E1CR24L Nodes"
-summary: "This section explains how to replace hardware components in Supermicro 2015S nodes."
+summary: "This section provides basic stipulations regarding the replacement of certain hardware components in Supermicro 2015S nodes."
 permalink: /hardware-guide/supermicro-a-plus-asg-2015s-e1cr24l/replacing-hardware-components.html
 sidebar: hardware_guide_sidebar
 ---
 
-{% include content-reuse/platform-agnostic-part-replacement-admonitions.md %}
-
-## Replacing a Motherboard
-{{site.partReplaceDcmsShort}}
-
-## To Replace a Drive
-Your {{site.sm2015s}} chassis contains 24 HDDs, 4 NVMe drives, and one NVMe boot drive in an internal M.2 expansion slot. For information about replacing a drive, see [Drive Bay Mapping](drive-bay-mapping.html) in this guide and [Storage Drives (HDD and NVMe)](https://www.supermicro.com/manuals/superstorage/MNL-2628.pdf#page=49) in the Supermicro documentation.
-
-## To Replace an M.2 Boot Drive
-{{site.bootDriveInit}}
+For detailed hardware component replacement instructions, navigate to the <a href="https://www.supermicro.com/en/products/system/storage/2u/asg-2015s-e1cr24l">Storage A+ Server ASG-2015S-E1CR24L</a> in the Supermicro documentation, click **Resources & Downloads**, and then scroll down to the **User's Manuals** section.
 
-{% include content-reuse/platform-agnostic-boot-drive-replacement.md %}
+{% include content-reuse/platform-agnostic-part-replacement-admonitions.md %}
 
-## To Replace a Power Supply Unit (PSU)
-Your {{site.sm2015s}} chassis contains two PSUs. For information about replacing a PSU, see [Power Supply](https://www.supermicro.com/manuals/superstorage/MNL-2628.pdf#page=62) in the Supermicro documentation.
+* **Motherboard:** {{site.partReplaceDcmsShort}}
 
+* **NIC:** Qumulo Core doesn't require a minimum firmware version for a NIC. We recommend updating the firmware on a replacement NIC by following the recommendations in the Supermicro documentation.
 
-## To Replace a Fan
-Your {{site.sm2015s}} chassis has four internal fans. For information about replacing a fan, see [System Cooling](https://www.supermicro.com/manuals/superstorage/MNL-2628.pdf#page=58) in the Supermicro documentation.
+* **HDD, NVMe, and Boot Drives:** For more information, see [Drive Bay Mapping](drive-bay-mapping.html) and [To Initialize a Replacement M.2 Boot Drive](#initalize-boot-drive).
 
+* **DIMMs:** To identify which DIMM failed, you must use the baseboard management controller (BMC) on the node or another hardware monitoring solution.
 
-## To Replace a DIMM
-Your {{site.sm2015s}} chassis has 16 DIMM slots. For information about replacing a DIMM, see [DIMM Installation](https://www.supermicro.com/manuals/superstorage/MNL-2628.pdf#page=467) and [DIMM Module Population Sequence](https://www.supermicro.com/manuals/superstorage/MNL-2628.pdf#page=46) in the Supermicro documentation.
+<a id="initialize-boot-drive"></a>
+## To Initialize a Replacement M.2 Boot Drive
 
-{% include note.html content="To identify which DIMM failed, you must use the baseboard management controller (BMC) on the node or another hardware monitoring solution." %}
+{{site.bootDriveInit}}
+
+{% include content-reuse/platform-agnostic-boot-drive-replacement.md %}