DOCS-2476

_includes/content-reuse/create-configure-cluster.md

@@ -12,7 +12,7 @@
 
 1. On the **2. Confirm cluster protection level** page, Qumulo Core selects the recommended 2, 3, or 4-drive protection level based on your cluster size and node type.
 
-{% if page.platform != 'q2uhg2' %}
+{% unless page.platform contains 'q2uhg2' %}
 1. If the **Customize Protection Level** option appears, you can increase your system resilience by selecting 3- or 4-drive protection.
 
    {{site.data.alerts.important}}
@@ -25,7 +25,7 @@
      <li>Using 3- or 4-drive protection reduces the total capacity of your cluster.</li>
    </ul>
    {{site.data.alerts.end}}
-{% endif %}
+{% endunless %}
 
 1. Enter a password for the administrative account and click **Create Cluster**.
 

_includes/content-reuse/platform-agnostic-part-replacement-procedure-fvt.md

@@ -1,19 +1,25 @@
-{% if page.platform != 'quiver' %}
+{% unless page.platform contains 'quiver' %}
 ## To Perform the Part Replacement Procedure by Using the FVT
 {{site.partReplaceDefine}}
 
-  {% if page.platform != 'hpe' %}
+  {% unless page.platform contains 'hpe' %}
   {% capture content_tag %}{{site.partReplaceDcms}}{% endcapture %}
   {% include note.html content=content_tag %}
-  {% endif %}
-{% endif %}
+  {% endunless %}
+{% endunless %}
 
 1. Boot by using the latest version of the Qumulo Core USB Drive Installer.
 
 1. Select **[*] Perform maintenance**.
 
 1. Select **[2] Perform automatic repair after part replacement (non-destructive)**.
 
+{% unless page.platform contains 'q2uhg2' %}
    The part replacement procedure runs and the **FVT passed!** message appears.
 
 {% include note.html content="In some cases, after the part replacement procedure, the message `FIX: Run the FVT flash command.` appears. Enter `1` as you would for a fixable issue to reboot the node and then repeat the part replacement procedure." %}
+{% endunless %}
+
+{% if page.platform contains 'q2uhg2' %}
+   Follow the prompts to complete the chassis replacement.
+{% endif %}

_includes/content-reuse/run-anywhere-conditional-admonitions.md

@@ -1,4 +1,4 @@
-{% capture checkNetworks %}{% if page.platform == 'all4110' %}Your {{site.all4110}} node uses a <a href="wiring-nodes-networking-cluster.html">split networking configuration</a>. Ensure that the <a href="wiring-nodes-networking-cluster.html#connecting-to-redundant-switches">front-end and back-end networks</a> are connected and operational before creating your cluster.{% elsif page.platform == 'q1uag1' %}The dual-NIC variant of your {{site.q1uag1}} node uses a <a href="configuring-ipmi-wiring-nodes.html">split networking configuration</a>. Ensure that the <a href="configuring-ipmi-wiring-nodes.html#step-2-connecting-the-100-gbps-ports">front-end and back-end networks</a> are connected and operational before creating your cluster.{% endif %}{% endcapture %}
+{% capture checkNetworks %}{% if page.platform contains 'all4110' %}Your {{site.all4110}} node uses a <a href="wiring-nodes-networking-cluster.html">split networking configuration</a>. Ensure that the <a href="wiring-nodes-networking-cluster.html#connecting-to-redundant-switches">front-end and back-end networks</a> are connected and operational before creating your cluster.{% elsif page.platform contains 'q1uag1' %}The dual-NIC variant of your {{site.q1uag1}} node uses a <a href="configuring-ipmi-wiring-nodes.html">split networking configuration</a>. Ensure that the <a href="configuring-ipmi-wiring-nodes.html#step-2-connecting-the-100-gbps-ports">front-end and back-end networks</a> are connected and operational before creating your cluster.{% endif %}{% endcapture %}
 
 {% capture unifiedNetworking %} If only one of the networks is connected and operational during the cluster creation process, Qumulo Core deploys with the unified networking configuration.{% endcapture %}
 

hardware-guide/quiver-2u-hybrid-gen2/getting-started.md

@@ -13,7 +13,7 @@ platform:
 
 
 ## Step 2: Boot by Using the Qumulo Core USB Drive Installer
-1. When the node powers on and begins to boot, on the **ASUS** screen, press **F8**.
+1. When the node powers on and begins to boot, enter the boot menu.
 
    {{site.data.alerts.note}}
    <ul>
@@ -22,7 +22,7 @@ platform:
    </ul>
    {{site.data.alerts.end}}
 
-1. On the **Please select boot device:** screen, select your USB drive (usually labeled with `UEFI OS`) and boot into it.
+1. On the boot device selection screen, select your USB drive (usually labeled with `UEFI OS`) and boot into it.
 
    The Qumulo Core installation begins.
 

hardware-guide/quiver-2u-hybrid-gen2/panel-leds.md

@@ -5,7 +5,7 @@ permalink: /hardware-guide/quiver-2u-hybrid-gen2/panel-leds.html
 sidebar: hardware_guide_sidebar
 ---
 
-## Front and Rear Paanel LEDs and Buttons
+## Front and Rear Panel LEDs and Buttons
 
 For information about the front and rear panel LEDs and buttons, <a href="https://docs.qumulo.com/pdf/quiver-2uh-hybrid-rackmount-chassis-user-manual.pdf#page=11" class="pdf">Front Panel and Rear Panel (p. 11)</a> {{site.hardware.fromAIC}}.