Skip to content

CP/M-IDE v2.2

Compare
Choose a tag to compare
@feilipu feilipu released this 17 Nov 14:16
· 113 commits to master since this release

This is Release Version 2.2 of CP/M-IDE.

Four options are provided. Chose the appropriate HEX file for your hardware, and write it to a 32kB or 64kB ROM.

  1. RC2014 Pro (using CF Module) - default option - no additional hardware
  2. RC2014 Pro plus IDE Module - SIO Serial Module
  3. RC2014 Pro plus IDE Module - ACIA Serial Module
  4. RC2014 Pro plus IDE Module - 8085 CPU Module - ACIA Serial Module

Unzip the attached SYS.CPM file as a starting point to create your own customised system drive. Using the yash-pro.com, yash.com, or yash85.com application appropriate for your system additional drives can be created, duplicated, or deleted. An updated and renamed version of yash.com (for both SIO and ACIA) is found in the attached yash.zip file. Upload the appropriate yash version for use, with the XMODEM.COM utility from the system utilities drive.

yash-sio.com has been obsoleted, and yashacia.com (as found in SYS.CPM) should be used for both SIO and ACIA builds, but by preference use the updated versions in the yash.zip file.

Also attached (with permission) are Gerber files for a CF PPIDE Module for RC2014 PCB which directly supports CF Cards, and SD Cards using SD-CF Adapters, in 16-bit native IDE mode. Note: modified Gerber files v1.1 to reduce propensity for solder bridging across CF Card Connector GND pins (no change in function).

For detailed information please read further.