⌘

MacroPad

Yet another MacroPad but remotely configurable/scriptable/executable over Wi-Fi.
Most importantly, it uses much cheaper solutions than the other existing ones.

🚧

Hardware

PCB

• Exported EasyEDA Project

• Schematic (PDF)

• Manufacturing Files (Gerber)

• BOM (CSV)

3D Printing Parts

There's 2 parts you can print

• Body: The stand or case whatever you call it, shown in the picture above.
• Spacer: To align the keys while soldering. This is optional.

3D Printing Parts (STL/AMF/FreeCAD)

It's recommended to place 4 Silicone Rubber Feet with diameter of 10mm underneath the body to prevent slipping.

Web Interface

http://macropad.local/

The web interface is a Vue.js application.

See /web for more information.

API

Method	URL	Description	Done
GET	/api/config	read config	✅
POST	/api/config	write config	✅
DELETE	/api/config	delete config	✅
GET	/api/restart	restart	✅
GET	/api/reset	earase all settings	✅

Build / Development

TODO: Add more information about development.

Clone this project

git clone [email protected]:RayPS/MacroPad.git

Open this project in PlatformIO

Update upload_port

Update monitor_port (optional, if you want to see debug messages from SoftwareSerial, otherwise remove this option)

Finally, upload to the board.

Web Interface Development

cd MacroPad/web

yarn install

yarn run dev to start web development or yarn run build to build the html PROGMEM for the firmware.

(After yarn run build, you can perform an upload in PlatformIO again)

Macro Script Proposal

Syntax	Feature	Done
# This is a comment @ CTRL SHIFT CMD F1 $ Hello world! ! 1200 ~ 50 + WIN R - WIN R .	comment shortcut string wait (ms) interval (ms) press key release key release all keys	✅ ✅ ✅ ✅ ❌ ✅ ✅ ✅

Todo

• Hardware
  • PCB
    • Use USB-C instead of Micro USB 😅
  • 3D Prints
    • Design the top case
    • Printable potentiometer cap, maybe
• Software
  • Firmware
    • Decide the functionality for the potentiometer
    • Fix the SW0 (IO9) crash
    • Implementation of ~Interval, don't see any use case yet
  • Web Interface
    • Add a "usage/reference" page
    • Syntax highlighting. is this necessary?
    • Config saving guard (macro syntax validation)

Features Roadmap:

• Remote execution (Already done but wont add to current version)
• Multi-configs