Skip to content
This repository has been archived by the owner on Sep 12, 2023. It is now read-only.
/ soe-ci Public archive

Jenkins integration scripts for use in an SOE Build Factory based on Red Hat Satellite 6.

License

Notifications You must be signed in to change notification settings

RedHatSatellite/soe-ci

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Continuous Integration Scripts for Satellite 6


  • Author: Janine Eichler
  • Email: [email protected]
  • Revision: 0.4
  • Introduce Jenkins Pipeline

  • Domain Architect: Eric Lavarde
  • Email: [email protected]
  • Consultant: Patrick C. F. Ernzer
  • Email: [email protected]
  • Date: February to November 2016
  • Revision: 0.3
  • Satellite 6.2 is now a minimum requirement, 6.1 will not work.
  • Satellite 6.3, 6.4 and 6.5 have been tested.
  • as a general rule the latest version of Satellite is the one Patrick develops against.

Table of Contents

Standard Operating Environment Overview

It is extremely helpful if you read the following blog posts, that explain the concepts behind this repo, before trying to implement.

Introduction

Continuous Integration for Infrastructure (CII) is a process by which the Operating System build ("build") component of a Standard Operating Environment (SOE) can be rapidly developed, tested and deployed.

A build is composed of the following components:

  • Red Hat provided base packages
  • 3rd party and in-house developed packages
  • Deployment instructions in the form of kickstart templates
  • Configuration instructions in the form of puppet modules
  • Test instructions in the form of BATS scripts

The CII system consists of the following components:

  • A git repository, containing the 3rd party and in-house packages, kickstarts, puppet modules and BATS scripts. This is where development of the build takes place.
  • A Jenkins instance. This is responsible for building artefacts such as RPMs and Puppet modules, Pushing artefacts into the Red Hat Satellite, and orchestrating and reporting tests.
  • Red Hat Satellite 6. This acts as the repository for Red Hat-provided and 3rd party packages, kickstarts and puppet modules. The Foreman module is also used to deploy test clients.
  • A virtualisation infrastructure to run test clients. I have used KVM/Libvirt, VMware and RHEV in different engagements.

The architecture is shown in this YeD diagram.

Setup

The following steps should help you get started with CII.

Jenkins Server

NB I have SELinux enabled on the Jenkins server and it poses no problems.

Installation

  • Install a standard RHEL 7 server with a minimum of 4GB RAM, 50GB availabile in /var/lib/jenkins and 10GB available in /var/lib/mock if you intend to do non CI triggered mock builds (highly recommended for debugging). It's fine to use a VM for this.
  • verify with timedatectl that your timezone is set correctly (for correct timestamps in Jenkins).
  • Register the server to RHN RHEL7 base and RHEL7 rhel-7-server-satellite-tools repos. You need the Satellite Tools repo for puppet.
  • Configure the server for access to the EPEL and Jenkins repos.
    • note that for EPEL 7, in addition to the 'optional' repository (rhel-7-server-optional-rpms), you also need to enable the 'extras' repository (rhel-7-server-extras-rpms).
  • Install httpd, mock, createrepo, git, nc and puppet on the system. All but mock are available from the standard RHEL repos so should just install with yum. mock is available from EPEL.
    • [root@jenkins ~]# yum install httpd mock createrepo git nc puppet
  • Ensure that httpd is enabled, running and reachable.
[root@jenkins ~]# systemctl enable httpd ; systemctl start httpd
[root@jenkins ~]# firewall-cmd --get-active-zones
[root@jenkins ~]# firewall-cmd --zone=public --add-service=http --permanent
[root@jenkins ~]# firewall-cmd --zone=public --add-service=https --permanent
[root@jenkins ~]# firewall-cmd --reload
[root@jenkins ~]# firewall-cmd --zone=public --list-all
  • Configure mock by copying the rhel-7-x86_64.cfg or rhel-6-x86_64.cfg file to /etc/mock on the jenkins server and setting MOCK_CONFIG for the relevant Jenkins job.
    • edit the file and replace the placeholder YOUROWNKEY with your key as found in the /etc/yum.repos.d/redhat.repo file on the Jenkins server.
    • please see this post on the Satellite blog for a more detailled explanation on mock with Satellite 6.
    • make sure the baseurl points at your Satellite server. The easiest way to do this is to just copy the relevant repo blocks from the Jenkins server's /etc/yum.repos.d/redhat.repo
    • if your Jenkins server is able to access the Red Hat CDN, then you can leave the baseurls pointing at https://cdn.redhat.com
    • if you are getting mock errors related to systemd-nspawn then add config_opts['use_nspawn'] = False to your relevant mock config files.
  • Install jenkins, tomcat and Java. If you have setup the Jenkins repo correctly you should be able to simply use yum.
    • [root@jenkins ~]# yum install jenkins tomcat java
  • Ensure that jenkins is enabled, running and reachable.
[root@jenkins ~]# systemctl enable jenkins ; systemctl start jenkins
[root@jenkins ~]# firewall-cmd --zone=public --add-port="8080/tcp" --permanent
[root@jenkins ~]# firewall-cmd --reload
[root@jenkins ~]# firewall-cmd --zone=public --list-all
  • Now that Jenkins is running, browse to it's console at http://jenkinsserver:8080/

  • Select the 'Manage Jenkins' link, followed by 'Manage Plugins'. You will need to add the following plugins:

  • Select 'Configure System'

    • Enable 'Environment variables' in the Global properties section and click save (there is no need to Add any). Failing to enable this property leads to #48
  • Restart Jenkins

  • Add the jenkins user to the mock group (usermod -a -G mock jenkins). This will allow Jenkins to build RPMs.

  • Create /var/www/html/pub/soe-repo, /var/www/html/pub/soe-puppet and assign their ownership to the jenkins user. These will be used as the upstream repositories to publish artefacts to the satellite.

    • Create /var/www/html/pub/soe-puppet-only for the puppet only workflow and assign its ownership to the jenkins user. It serves for the puppet only workflow.
    • The pipeline handles both full builds and puppet-only via variables, so set them up both.
  • su to the jenkins user (su jenkins -s /bin/bash) and use ssh-keygen to create an ssh keypair. These will be used for authentication to both the git repository, and to the satellite server.

Jenkins Jobs

Overview

First of all, let's have a look at the bigger picture here. You'll create at least two jobs. One will be solely responsible for polling your SCM. When changes are detected on the SCM, the second job will be triggered. The second job will then take care of building, pushing to Satellite and running the tests. It is important to note that these steps (building the rpm's and/or puppet modules, pushing them to Satellite, running the tests etc.) will be done using a Jenkins Pipeline, so it is code written in Groovy and part of the soe-ci git repository. Documentation for the pipeline can be found here. We use a scripted pipeline, not the declarative one.

The configuration options will be explained later on.

In general you might want to have multiple of these job pairs. E.g. for EL6 and EL7, building only puppet modules or the "full" build including RPMs.

Job parameters and what they do

Right now a couple of job parameters are used which you need to configure:

Parameter Name Description
SOE_CI_REPO_URL the git repository url of your soe-ci project
SOE_CI_BRANCH the branch containing the Jenkinsfile and config file to build the RPMs and puppet modules from
CREDENTIALS_ID_SOE_CI_IN_JENKINS the credentials id of the user configured in Jenkisn to access the source code of the soe ci project in git
ACME_SOE_REPO_URL the git repository url to checkout the 'acme-soe' project from
ACME_SOE_BRANCH the branch to checkout of the 'acme-soe' repo.
CREDENTIALS_ID_ACME_SOE_IN_JENKINS analogous to CREDENTIALS_ID_SOE_CI_IN_JENKINS, can be the same, depending on your setup
RHEL_VERSION this param indirectly configures two things: which mock config to use (the pattern is /etc/mock/<RHEL_VERSION>-x86_64.cfg) and which config file the pipeline uses for environment parameters (pattern is <RHEL_VERSION>-script-env-vars-puppet-only.groovy for a PUPPET_ONLY build and <RHEL_VERSION>-script-env-vars-rpm.groovy for a rpm and puppet module build.)
REBUILD_VMS whether or not to reinstall the test VMs before running the tests
POWER_OFF_VMS_AFTER_BUILD Whether or not to power off the VMs after the build. The build result (successful / failed) is not taken into consideration.
PUPPET_ONLY Whether or not only puppet modules should be built and pushed. This will reduce the duration of the build significantly (provided you update a CV that only contains puppet modules), however it ignores RPMs completely.
CLEAN_WORKSPACE Whether or not to clean the jenkins workspace before the job execution.
VERBOSE Whether or not to run the executed scripts in a verbose mode. Basically it decides whether run 'bash -x' or just 'bash '

Create the jobs

Create a Job which runs the pipeline

  • Create a directory matching the job name in /var/lib/jenkins/jobs (e.g. (e.g. /var/lib/jenkins/jobs/soe-el7) and copy the config-jenkinsfile.xml file into it as /var/lib/jenkins/jobs/<job-name>/config.xml. Make sure the jenkins user is the owner of both.
  • Reload the configuration from disk using 'Manage Jenkins -> Reload Configuration from Disk'.
  • Check that the build plan is visible and correct via the Jenkins UI, you will surely need to adapt the parameter values to your environment.
    • Make sure that in the "Pipeline" section of the job configuration the "Lightweight checkout" is ticked and that the value for "Script Path" points to the "Jenkinsfile" in your repository.

Create a job which polls the SCMs and then triggers the previously created job

  • Create a directory matching the job name in /var/lib/jenkins/jobs (e.g. (e.g. /var/lib/jenkins/jobs/scm-poll-for-soe-el7) and copy the config.xml file into it. Make sure the jenkins user is the owner of both.
  • Reload the configuration from disk using 'Manage Jenkins -> Reload Configuration from Disk'.
  • Check that the build plan is visible and correct via the Jenkins UI, you will surely need to adapt the parameter values to your environment.

How do I change the pipeline

It's simple. It's written in Groovy. If you want to test your changes first before pushing multiple commits to the repository, you can simply create a new job, which is a copy of your "second" job (remember, there are two jobs, one which pulls and one which builds), and change in the "Pipeline" section the "Defintion" from "Pipeline Script from SCM" to "Pipeline Script". Copy and paste your pipeline in the box (it's a groovy sandbox), and you're good to go. Remember this is for testing only. Once you're done, push your changes accordingly and delete the job you created for testing purposes.

Git Repository

  • Clone the following two git repos:
  • Push these to a private git remote (or branch/fork on github).
  • Edit the build plan on your Jenkins instance so that the two SCM checkouts point (one for acme-soe, the other for soe-ci) point to your private git remote - you will need to edit both of these.
  • Make sure to set up the files script-env-vars.groovy script-env-vars-puppet-only.groovy script-env-vars-rpm.groovy
    • be sure to have a different PUPPET_REPO_ID for the full and puppet-only build.
  • Maintain your pipeline script Jenkinsfile in soe-ci.git
  • Commit and push to git

Satellite 6

  • Install and register a Red Hat Satellite 6 as per the instructions.
  • Enable the following repos: RHEL 7 Server Kickstart 7Server, RHEL 7 Server RPMs 7Server, RHEL 7 Server - RH Common RPMs 7 Server
  • Create a sync plan that does a daily sync of the RHEL product
  • Do an initial sync
  • Create a product called 'ACME SOE'
  • Create two Puppet repos
  • Create an RPM repository called 'RPMs' with an upstream repo of http://jenkinsserver/pub/soe-repo
  • Do NOT create a sync plan for the ACME SOE product. This will be synced by Jenkins when needed.
    • keep an eye on RHBZ #1132980 if you use a web proxy at your site to download packages to the Satellite.
    • see here or here for a workaround until this is fixed.
  • Take a note of the repo IDs for the Puppet and RPMs repos. You can find these by hovering over the repository names in the Products view on the Repositories tab. The digits at the end of the URL are the repo IDs.
  • Create a jenkins user on the satellite.
  • Configure hammer for passwordless usage by creating a ~jenkins/.hammer/cli.modules.d/foreman.yml file (older Satellite versions use ~jenkins/.hammer/cli_config.yml). More details here.
  • Copy over the public key of the jenkins user on the Jenkins server to the jenkins user on the satellite and ensure that jenkins on the Jenkins server can do passwordless ssh to the satellite.
  • Configure a Compute Resource on the satellite - I use libvirt, but most people are using VMWare or RHEV. This will be used to deploy test machines.

Bootstrapping

In order to create a Content View on the satellite, you need some initial content. That can be generated by Jenkins.

Now manually trigger both

  • a normal build
  • a puppet-only build

This will fail, however it will create some content in the output directories by building the demo RPMs and Puppet modules. Check that these are available then do the following tasks:

  • On the satellite, do a manual sync of your ACME SOE product. Check that it syncs correctly and you have got the RPMs and puppet modules that Jenkins built for you.
  • Add the ACME SOE RPM and Puppet repos to the Content View, along with the RHEL 7 RPMs and RHEL 7 Common repos, and any third party puppet modules that are needed.
  • Publish the Content View - ensure that it contains your RPMs and puppet modules.
  • Create a lifecycle environment that your test clients will live in. I called mine 'SOE Test' you will need to get the ID of this environment, most likely it will be 2 or you can find it with 'hammer lifecycle-environment list --organization="Default_Organization"'
  • Create an activation key that provides access to the RHEL 7 RPMs, RHEL 7 Common, RPMS, and Puppet repos. (you don't need access to the kickstart repo after installation)
  • Create a hostgroup (I called mine 'Test Servers') that deploys machines on to the Compute Resource that you configured earlier, and uses the activation key that you created. Create a default root password and make a note of it.
  • Create a couple of initial test servers and deploy them. Ensure that they can see your private RPM and puppet repositories as well as the Red Hat repositories.
    • If you plan to use the conditional VM build feature, edit the comment field of your test host(s) with the names of the Puppet modules, RPM packages and/or kickstart files surrounded by '#' if they are relevant to be tested on this specific host. E.g. if the 'ssh' module is modified, a host will only be re-built and tested if its comment field contains the string '#ssh#'.
  • CReate one or two Host Collections and configure TESTVM_HOSTCOLLECTION in script-env-vars-puppet-only.groovy and script-env-vars-rpm.groovy

FIXME: add instructions on HC

Getting Started

At this point, you should be good to go. In fact Jenkins may have already kicked off a build for you when you pushed to github.

Develop your build in your checkout of acme-soe. Software that you want packaging goes in 'rpms', puppet modules in 'puppet' and BATS tests in 'tests'. You MUST update versions (in specfiles and metadata.json files) whenever you make a change, otherwise satellite6 will not pick up that you have new versions, even though Jenkins will have repackaged them.

COMING SOON

About

Jenkins integration scripts for use in an SOE Build Factory based on Red Hat Satellite 6.

Resources

License

Stars

Watchers

Forks

Packages

No packages published