Update README.md

README.md

@@ -1,5 +1,5 @@
 # Schneggi sensor 🐌
-A low-power ZigBee sensor integrated with HomeAssistant for monitoring temperature, humidity, and CO2 levels.
+A low-power ZigBee sensor integrated with HomeAssistant for monitoring temperature, humidity, and CO2.
 
 ## Design Goals
 - High accuracy temperature and humidity measurements ([Sensirion SHTC3](https://www.sensirion.com/products/catalog/SHTC3/))
@@ -18,23 +18,14 @@ The PCB was designed with KiCad 7 and manufactured/assembled with JLCPCB. All re
 ![base](https://github.com/user-attachments/assets/ae48fca6-d7ca-4260-b0ca-0d7fdca1a1e8)
 ![co2](https://github.com/user-attachments/assets/a420414e-1857-45f5-8971-0bba9cf12d0e)
 
-## Case
-A 3D printable case was generated with the help of [Ultimate Box Maker](https://github.com/jbebel/Ultimate-Box-Maker).
-
-![Ultimate_Box](https://github.com/Rogger/schneggi-sensor/assets/371835/782dbbfe-b442-4105-b787-0a193e914e4e)
-
 ## HomeAssistant
-Works out of the box
-
-![Screenshot from 2023-11-21 21-22-59](https://github.com/Rogger/schneggi-sensor/assets/371835/cefebd48-2896-4cb5-bfa6-d6ba029c3226)
 
-![Screenshot from 2023-11-21 21-27-04](https://github.com/Rogger/schneggi-sensor/assets/371835/61f52585-6c13-4973-a659-87bb132f250d)
+![image](https://github.com/user-attachments/assets/fe9de769-8348-4b40-8632-f8fcfae44b9a)
 
 ## How to build?
-- Install VSCode + nRF plugins.
+- Install VSCode + nRF plugins
 - Install nRF SDK and toolchain 2.5.0
 - Add a build configuration with custom board `adafruit_feather_nrf52840`
-- You can program the board with the nRF52840 DK, the following wiring was used https://devzone.nordicsemi.com/f/nordic-q-a/84893/programming-a-custom-board-with-an-nrf52840-dev-kit. Additionally the pin RESET is connected, for automatic board reset.
 
 ## Resources
 - The PCB design was inspired by [Getting Started With nRF52 MCU in a PCB](https://resources.altium.com/p/getting-started-nrf52-mcu-pcb#getting-started-schematics)