5.0.7

• version update from 5.0.6 to 5.0.7
• add require of package sysctl-logger
  (jsc#PED-5025)
• suppress error message regarding missing systemd service file during posttrans script

released to SLE15 only (no SLE12 changes this time)

5.0.6-sle12

• version update from 5.0.5 to 5.0.6
• add parameter IGNORE_RELOAD to /etc/sysconfig/sapconf to prevent sapconf from changing any system tunables during package update (bsc#1209408)
• fix for a race condition which leads to a missing start/restart of sapconf, which ends up with restored kernel parameters to defaults (bsc#1207899)

5.0.6

• version update from 5.0.5 to 5.0.6
• add parameter IGNORE_RELOAD to /etc/sysconfig/sapconf to prevent sapconf from changing any system tunables during package update (bsc#1209408)
• fix for a race condition which leads to a missing start/restart of sapconf, which ends up with restored kernel parameters to defaults (bsc#1207899)

5.0.4-sle12

• version update from 5.0.3 to 5.0.4
• change block device handling to handle multipath devices correctly. Only the DM multipath devices (mpath) will be used for the settings, but not its paths. (bsc#1188743)
• fixed wrong comparison used for setting force_latency (bsc#1185702)
• SAP Note 1771258 v6 updates nofile values to 1048576 (bsc#1192841)

5.0.4

• version update from 5.0.3 to 5.0.4
• change block device handling to handle multipath devices correctly. Only the DM multipath devices (mpath) will be used for the settings, but not its paths. (bsc#1188743)
• fixed wrong comparison used for setting force_latency (bsc#1185702)
• SAP Note 1771258 v6 updates nofile values to 1048576 (bsc#1192841)

5.0.3-sle12

• version update from 5.0.2 to 5.0.3
• adapt the activity detection of saptune to the upcoming saptune version 3 (bsc#1189496)

5.0.3

• version update from 5.0.2 to 5.0.3
• adapt the activity detection of saptune to the upcoming saptune version 3 (bsc#1189496)

5.0.2-sle12

• version update from 5.0.1 to 5.0.2

• added sapconf_check and supportconfig plugin for sapconf

• change log message for 'MIN_PERF_PCT' parameter to reduce the spot light (bsc#1179524)

• add additional check to detect an active saptune service (started but disabled and without any notes applied).
  Improve the logging message.
  (bsc#1182314)

• correct a typo in the last changelog entry (confused saptune and sapconf).
  Clarify the man page section about profile handling.
  (bsc#1179880)

• preserve the state of the sapconf.service during the package update. Only disable the sapconf service, if saptune is active.
  In any other cases don't touch the state of the sapconf service.
  If tuned has problems and the command 'tune-adm off' does not work properly in the preinstall script of the package, try to stop the tuned service to avoid weird error messages in the log of tuned during and after the package update
  (bsc#1182906)

5.0.2

• version update from 5.0.0 to 5.0.2

• added sapconf_check and supportconfig plugin for sapconf

• change log message for 'MIN_PERF_PCT' parameter to reduce the spot light (bsc#1179524)

• add additional check to detect an active saptune service (started but disabled and without any notes applied).
  Improve the logging message.
  (bsc#1182314)

• enable and start sapconf.service during package update, if tuned is running with sapconf as profile (bsc#1176061)

• preserve the state of the sapconf.service during the package update. Only disable the sapconf service, if saptune is active.
  In any other cases don't touch the state of the sapconf service.
  If tuned has problems and the command 'tune-adm off' does not work properly in the preinstall script of the package, try to stop the tuned service to avoid weird error messages in the log of tuned during and after the package update
  (bsc#1182906)

5.0.1 - sle12 only

Release 5.0.1 is only available for SLE12 codestream

• version update from 5.0.0 to 5.0.1

• to not blocking the start of sapconf after an unexpected and ungracefull reboot of the system, we move the file 'act_profile' from a persistent location in /var/lib/sapconf to a temporary location at /run/sapconf_act_profile (bsc#1176565)

• enable and start sapconf.service during package update, if tuned is running with a sapconf profile (bsc#1176061)

• add missing commands 'restart' and 'try-restart' to the usage message (bsc#1173347)