WFGen

Waveform generator designed to create waveforms in file or over the air format.

This toolkit is under development and no warranty is expressed or implied with. USE AT OWN RISK.

It is assumed that this repo has been downloaded and can be installed with git. The top level folder of this repo is assumed to be wfgen

This toolkit relies on a trusted transmitter approach.

The computer hosting the server interface must have a trusted timestamp
- An NTP server should provide sufficient reliability
The receiver is user defined and controlled
- Any time differential should be handled at the receiver
- Any frequency differential can be interpretted as transceiver imperfection

Computers connected to transmit devices host a server and the single user connects with the client.

All development has relied on the B2XX series USRPs.

Author

Initial worker on applications and supporting code: Joseph Gaeddert
Continued development and CLI: Bill Clark

Contact: [email protected]

Install

This has largely been developed and tested on Ubuntu 20.04/22.04.

Some functionality is currently tied to python and GNU Radio, but are not required (hopefully).

GNU Radio is assumed to be installed with PyBombs, but if not, just make sure to export the PYBOMBS_PREFIX=/usr (on Ubuntu) for functionality.

Dependencies

git
automake
autoconfg
pthread
fftw
zmq
czmq
boost_system
libyaml
pip

Submodule Dependency

liquid-dsp

Initial steps

Assuming tools and libraries are installed and available

For development ease, the repo expects to be wrapped into a virtual environment

virtualenv wfgen-dev

Then the following needs to be appended to the activate script for linking Adjust/comment out the /mnt/ramdisk creation as desired.

Alternatively, the script at scripts/wfgen_env.sh can be used in place of altering the activate script. This will try to load what is needed into the environment and will set WFGEN_ENV=1 if fully successful.

if [[ $LD_LIBRARY_PATH != *${VIRTUAL_ENV}* ]]; then
    export LD_LIBRARY_PATH="${VIRTUAL_ENV}/lib${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}"
fi
if [[ $LIBRARY_PATH != *${VIRTUAL_ENV}* ]]; then
    export LIBRARY_PATH="${VIRTUAL_ENV}/lib${LIBRARY_PATH:+:$LIBRARY_PATH}"
fi
if [ ! -z ${AUDIO_FOLDER+x} ]; then
    RAMDISK_SIZE="4g" ## change as desired
    if [ ! -d "/mnt/ramdisk/$(basename $AUDIO_FOLDER)" ]; then
        if [ ! -d "/mnt/ramdisk" ]; then
            sudo mkdir /mnt/ramdisk
        fi
        sudo mount -t tmpfs -o size=${RAMDISK_SIZE} tmpgs /mnt/ramdisk
        cp -r $AUDIO_FOLDER /mnt/ramdisk/
    fi
    if [ -z ${WFGEN_AUDIO_FOLDER+x} ]; then
        export WFGEN_AUDIO_FOLDER="/mnt/ramdisk/$(basename $AUDIO_FOLDER)"
    fi
else
    echo "AUDIO_FOLDER isn't set, so analog waveforms won't work properly"
    echo " Need to set WFGEN_AUDIO_FOLDER manually"
fi

The current functionality of analog waveforms assumes there's an AUDIO_FOLDER that contains wav files that can be used as an analog source. If not set before activating the environment, manually set WFGEN_AUDIO_FOLDER for automatic audio selection. It is recommended that the audio be on a temp filesystem in RAM for best performance.

Once the VIRTUAL_ENV is setup, the make files should be functional and will install the submodule liquid-dsp, but if already installed just tweak the makefile to skip this step.

The apps are then created in build/apps and if installed will go to VIRTUAL_ENV/bin

make -j4 install

There are logging programs logger_server and logger_file that are meant for debugging and are not documented, use at your discretion.

The main waveform apps then start with wfgen_ and have built in help commands

wfgen_linmod -h

The CLI

The CLI relies on python module cli, and the module can be installed with pip. Though it can be installed, the code execution still takes place from the root folder of the repo.

Install (as tested)

(wfgen-dev) wfgen$ pip install -e .

The CLI operations in client/server configuration and can have multiple servers connected, but multiple clients can result in unexpected behavior.

Usage

Server

The server is the computer system connected to the radio devices. For better resource management, there can be as many servers as provides enough data throughput to utilize all desired devices.

Client

The client is the single user connection to all available servers. The client has a CLI available for manual control, but is accessible through a class object for further extension, and is used by the CLI for an example usage.

Example System Setup

Server 1:
X.X.X.5 : 50000
3x B210

Server 2:
X.X.X.8 : 50000
1x B205

Server 3:
X.X.X.20 : 50000
2x B200

Client:
# (assuming ports are open between client/servers)
wfgen_cli --conn X.X.X.5 50000 0 --conn X.X.X.8 50000 0 --conn X.X.X.20 50000 0 --verbose
|||||||
# (assuming only ssh is open between client/servers)
wfgen_cli --conn X.X.X.5 50000 1 --conn X.X.X.8 50000 1 --conn X.X.X.20 50000 1 --verbose

(Cmd) get_radios
[shows 6 radios available]

Server Side

(Assuming installed)

wfgen_server --help
usage: wfgen_server [-h] [--addr ADDR] [--port PORT] [--octo-addr OCTO_ADDR] [--octo-port OCTO_PORT]
                 [--uhd-args UHD_ARGS] [--log-server]

optional arguments:
  -h, --help            show this help message and exit
  --addr ADDR           Interface address to bind to. Defaults to internet connection.
  --port PORT           Port to bind to (def: 50000)
  --uhd-args UHD_ARGS   Limit to devices whose flag provided will find (def: all uhd devices)
  --log-server          Use if a log-server is active (meant for debugging)

wfgen_server --addr 127.0.0.1
Starting server...started

At this point the server is up and bound to tcp://127.0.0.1:50000 and will have the ability to see all UHD USRP devices. To constrain to only specific radios --uhd-args can be used repeatedly with any UHD arguments that help find the devices. For example, to limit to only the B2XX series devices

wfgen_server --addr 127.0.0.1 --uhd-args type=b200

Client Side (CLI)

The client can be started as a program to use the designed command line interface.

(Assuming installed)

python3 wfgen_cli --help
usage: wfgen_cli [-h] [--conn addr port use_ssh] [--verbose] [--dev] [--log-server]

optional arguments:
  -h, --help            show this help message and exit
  --conn addr port use_ssh
                        Unique interface address to connect to. Default: host<internet connection IP> 50000 False
  --verbose             Should the cli spit out everything?
  --dev                 Should the cli spit out dev messages?
  --log-server          Use if a log-server is active (meant for debugging)

To connect to the server above

wfgen_cli --conn 127.0.0.1 50000 0 --verbose

** -------------------------------------------------------------------------- **
** Command List
** - help
**     -- Show this help menu
** - exit
**     -- Closes the cli
** - shutdown
**     -- Closes both the cli and server
** - get_radios
**     -- The process of how the cli figures out radio numbers
** - get_active
**     -- List of tuples -- each tuple is an active process on the server
** - get_finished
**     -- List of tuples -- each tuple is an finished process on the server
** - get_truth local_filename.json
**     -- Saves all sent signals since start/last call into local_filename.json
** - start_radio <device number> <profile type> <profile name> [options]
**     start_radio 0 profile qpsk frequency 2.45e6
**     -- This starts device 0 (with need args) at the specified frequency
**     -- This start_radio command will be revised
** - run_random [options]
**     run_random radios 0,1 bands 2.4e9,2.5e9 duration_limits 2.0,5.0 \
**         bw_limits 50e3,1e6 profiles qpsk,fsk16
**     -- This starts device 0,1 (with need args) with carrier in [2.4e9,2.5e9] Hz
**        with signals of on time in range [2,5] seconds,
**        with energy bandwidth in range [50e3,1e6] Hz
**        with profiles qpsk and fsk16
**     -- This run_random command will be revised
** - run_script [seed int, ... ] <script.json filepath/ dir with main.json>
**     run_script 1 2 3 4 5 configs
**     run_script 1 2 3 4 5 configs/main.json
**     run_script 1 2 3 4 5 truth_scripts/output-1a-truth.json
**     -- This starts all devices queue by the script
**     -- This run_script command will be revised
** - kill <proc_id>
**     -- Send kill signal to subprocess running a profile
** -------------------------------------------------------------------------- **

(Cmd)

The --conn flag can be used multiple times to connect to multiple servers at the same time. The final component of the --conn flag is whether ssh should be used to connect instead of direct port connection, and is intended for connecting to systems whose ports aren't necessarily open due to security concerns, yet can still be connected to through ssh. The first command will always need to be get_radios in order for any other functionality

(Cmd) get_radios
Radio List (2):
     0 server=0   args='type=b200,serial=30875A1'
     1 server=0   args='type=b200,serial=30E6262'

(Cmd)

Manual control can then be used to start one radio at a time.

(Cmd) start_radio 0 static bpsk frequency 2.45e9 gain 70 bw 0.7 rate 1e6
['frequency', '2.45e9', 'gain', '70', 'bw', '0.7', 'rate', '1e6']
frequency 2.45e9
gain 70
bw 0.7
rate 1e6
{'frequency': '2.45e9', 'gain': '70', 'bw': '0.7', 'rate': '1e6'}
src_cl: '0 static bpsk frequency 2.45e9 gain 70 bw 0.7 rate 1e6'
src_sl: ['0', 'static', 'bpsk', 'frequency', '2.45e9', 'gain', '70', 'bw', '0.7', 'rate', '1e6']
sending command: ['start_radio', 'static', '-a type=b200,serial=30875A1', 'bpsk', 'frequency', '2.45e9', 'gain', '70', 'bw', '0.7', 'rate', '1e6']
start_radio 0 static bpsk frequency 2.45e9 gain 70 bw 0.7 rate 1e6
reply: Starting process 1903712 /data/local/wfgen_reports/20240129082959_truth/truth_dev_30875A1_instance_00000.json

The process can then be ended with

(Cmd) kill 1903712
sending command: ['kill', '1903712']
kill 1903712
reply: Killing process 1903712

On the server side that interaction should produce something like this:

wfgen_server --addr 127.0.0.1 --uhd-args type=b200
Starting server...started
['frequency', '2.45e9', 'gain', '70', 'bw', '0.7', 'rate', '1e6', 'json', '/data/local/wfgen_reports/20240129082959_truth/truth_dev_30875A1_instance_00000.json']
frequency 2.45e9
gain 70
bw 0.7
rate 1e6
json /data/local/wfgen_reports/20240129082959_truth/truth_dev_30875A1_instance_00000.json
{'frequency': '2.45e9', 'gain': '70', 'bw': '0.7', 'rate': '1e6', 'json': '/data/local/wfgen_reports/20240129082959_truth/truth_dev_30875A1_instance_00000.json'}
Making a bpsk profile
RUNNING WITH THIS:
wfgen_linmod -a type=b200,serial=30875A1 -b 0.7 -f 2.45e9 -g 70 -r 1e6 -j /data/local/wfgen_reports/20240129082959_truth/truth_dev_30875A1_instance_00000.json -M bpsk
Using:
  modulation:   bpsk
  freq:         2450000000.000
  rate:         1000000.000
  bw:           0.700
  gain:         70.000
  args:         type=b200,serial=30875A1
  grange:       0.000
  cycle:        2.000
[INFO] [UHD] linux; GNU C++ version 9.4.0; Boost_107100; UHD_4.4.0.SCISRS_ECTB_BRANCH-0-g5fac246b
[INFO] [B200] Detected Device: B210
[INFO] [B200] Loading FPGA image: /opt/gnuradio/v3.10/share/uhd/images/usrp_b210_fpga.bin...
[INFO] [B200] Operating over USB 3.
[INFO] [B200] Detecting internal GPSDO....
[INFO] [GPS] No GPSDO found
[INFO] [B200] Initialize CODEC control...
[INFO] [B200] Initialize Radio control...
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Setting master clock rate selection to 'automatic'.
[INFO] [B200] Asking for clock rate 16.000000 MHz...
[INFO] [B200] Actually got clock rate 16.000000 MHz.
[INFO] [B200] Asking for clock rate 32.000000 MHz...
[INFO] [B200] Actually got clock rate 32.000000 MHz.
2000000,2500
running (hit CTRL-C to stop)
LINMOD ---> ctrl+c received --> exiting
usrp data transfer complete
Timestamp at program start: cpu sec: 1706535016.234323740
Connecting to radio at: cpu sec: 1706535016.234411716
Starting to send at: cpu sec: 1706535026.952406406
Stopping send at: cpu sec: 1706535032.096147776
Radio should be stopped at: cpu sec: 1706535032.159663200
.json log written to /data/local/wfgen_reports/20240129082959_truth/truth_dev_30875A1_instance_00000.json

The truth file containing information on everything that was transmitted can then be pulled to the client with the command

(Cmd) get_truth demo_run.json
'/tmp/tmpvfx_ct91/truth_report_000.json']
Tracking new source: type=b200,serial=30875A1
results written to demo_run.json
truth file: demo_run.json

-- Note: If the json is not proper, the report will not contain the improper json, but the information on the server for the specified signal (ex: /data/local/wfgen_reports/20240129082959_truth/truth_dev_30875A1_instance_00000.json) will still contain useful information, but will require human intervention to correct.

The previous runs can then be rerun from the script in a stochastic approximation of the original.

(Cmd) run_script demo_run.json
['/tmp/tmpc1jrvnd8/truth_report_000.json']
Tracking new source: type=b200,serial=30875A1
results written to demo_rerun.json
truth file: demo_rerun.json

In case just a random run is required with a limited set of signals, this can be achieved with the run_radom command. With the truth recovered in the same way. An example is shown below. Currently limitied to static profiles.

(Cmd) run_random radios 0,1 duration_limits 20,60 bands 2.4e9,2.5e9 bw_limits 50e3,1e6 profiles qpsk
Starting random run: 940287
(Cmd) kill 940287sending command: ['kill', '940287']
kill 940287
reply: Killing process 940287
(Cmd) get_truth demo_random.json
['/tmp/tmphbkcexaa/truth_report_000.json']
Tracking new source: type=b200,serial=31F59F6
Tracking new source: type=b200,serial=3164B4D
results written to demo_random.json
truth file: demo_random.json

For more complex randomized runs, a scenario can be created. This requires a bit more creation in order to successfully run, but an example scenario can be found in wfgen/scenarios/example_scenario_000.json which runs a noise waveform for a set time and parameter constraints in the directories within directories.

(Cmd) run_script scenarios/example_scenario_000.json
Starting scripted run: 1015948

And likewise, the truth file can be pulled in the same fashion.

Use tab in the CLI to find possible choices.

Known Bugs

Using the up and down keys in the command line is possible, but going up and then down can result in the CLI's pointer to get offset and make it harder to see exactly what is going on.
When the command wraps around the edge of the window the command itself can dissapear. This is usually fixed by hitting tab to refresh the line.
Precision roundoff in re-running scripts
Required directory /data/local/wfgen_reports is hardcoded and not created during install

How to reference:

@misc{wfgen,
  Title = {{WFGen: Waveform Generator and Truth Tracker}},
  Author = {{Clark IV, W. H.}},
  Year = {2024},
  Location = {Blacksburg, USA},
  Month = {February},
  Url = {https://github.com/vtnsiSDD/wfgen}
}

Name		Name	Last commit message	Last commit date
Latest commit History 31 Commits
.github/workflows		.github/workflows
apps		apps
include		include
liquid-dsp @ 9f32eb7		liquid-dsp @ 9f32eb7
py_src/wfgen		py_src/wfgen
scenarios		scenarios
scripts		scripts
src		src
test		test
.gitignore		.gitignore
.gitmodules		.gitmodules
CITATION.cff		CITATION.cff
LICENSE		LICENSE
README.md		README.md
makefile		makefile
pyproject.toml		pyproject.toml
requirements.txt		requirements.txt
setup.py.bak		setup.py.bak

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

WFGen

Author

Install

Dependencies

Submodule Dependency

Initial steps

The CLI

Install (as tested)

Usage

Server

Client

Example System Setup

Server Side

Client Side (CLI)

Known Bugs

How to reference:

About

Releases

Packages

Languages

License

SaikWolf/wfgen

Folders and files

Latest commit

History

Repository files navigation

WFGen

Author

Install

Dependencies

Submodule Dependency

Initial steps

The CLI

Install (as tested)

Usage

Server

Client

Example System Setup

Server Side

Client Side (CLI)

Known Bugs

How to reference:

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages