Skip to content

SebastianM-C/StorageGraphs.jl

Repository files navigation

StorageGraphs

Stable Dev Build Status Build Status Codecov

This is an experimental package for storing hierarchical data in graphs in a non-redundant way. This package aims to be useful when one has a combination of data and metadata or parameters and the use of tables would lead to a lot of redundancy in the corresponding columns.

Introduction

In general a graph is a collection of objects with some relations between them. If we describe the graph from a mathematical point of view, the objects correspond to vertices and the relations to edges. Graphs can be represented by diagrams. For example:

Simple graph Simple directed graph
graph example graph example

If the vertices have a direction, we call them directed graphs. We can use graphs to store data. To do this we will use a (directed) graph and associate metadata to the vertices and the edges. Each vertex will contain some data and the edges will provide the required connections. More precisely, a path will be associated with the (ordered) set of data entries. We will call a node a vertex and its associated metadata and a path will be the collection of all edges (identified by an id). For example if we have x = [1, 2, 3], then the graph looks like this:

graph example

Now, let's consider that we have a function, say f(x) = x^2, and we apply it to our x and want to store the resulting y = [1, 4, 9]. We encode the fact that y was derived / computed from x by using edges oriented from the x nodes to the y nodes. This creates a hierarchy in the data. Moreover, to use the graph efficiently, we can store all the entries of x in a node (and similar for y). We can compare the graph and the table representations:

id x y
1 1 1
2 2 4
3 3 9

Implementation

In this package we use NamedTuples to specify the information contained in the nodes. To specify the dependencies between nodes we use (nested) pairs(=>). For example, for generating the above graph we can use:

using StorageGraphs

g = StorageGraph()
add_nodes!(g, (x=[1,2,3],)=>(y=[1,4,9],))

Note: NamedTuples with a single element must use a comma. ((a=1,) is not the same as (a=1))

This package provides a custom a AbstractGraph type called StorageGraph (similar to MetaDiGraphs in MetaGraphs.jl). The metadata is stored in dictionaries with the keys being given by vertices or edges. For nodes the data is in the g.data field, while for edges in g.paths. The nodes of the graph can be found via the inverse dictionary g.index in which the keys are given by the data. The main search tool in the graph is the overloaded getindex function.

  • One way to search is by symbols. For example, for the above graph g[:x] will give all the values corresponding to :x ([1,2,3]). Important Note: the order of the values is not necessary the same as the order given when the data was added. This is because the order of the edges in the graph is not inherently defined. This way of searching is equivalent with searching on columns in a table.

  • Other ways of searching take advantage of the graph structure. For example we could search for the nodes which descend from a given hierarchy. This requires a more complicated graph structure to exemplify, so concrete examples will be provided later.

Tutorial and motivation

Let us consider that we have some simulation data with the following structure:

  • simulation parameters: P which takes a value or each simulation.
  • initial conditions: for each P we have an algorithm that generates some initial conditions. The algorithm itself may have parameters.
  • simulation results: for each initial conditions the simulation produces some results (we can think of this as being a function of the initial conditions as illustrated in the Introduction).

We will now progressively build up the graph. Let's say that the first simulation has P=1 and using "alg1" we generated some initial conditions (x).

using StorageGraphs

g = StorageGraph()

add_nodes!(g, (P=1,)=>(alg="alg1",)=>(x=[10., 20., 30.],))

Up to this point the graph and the equivalent table are presented below:

id P alg x
1 1 "alg1" 10.
2 1 "alg1" 20.
3 1 "alg1" 30.

For the initial conditions we used a node for the algorithm (containing the name) and one for each of the produced values. Next, we will obtain our simulation results and add them to the graph. Note: It is crucial that we load the initial conditions from the graph since we must get them in the correct order.

# retrieve the previously stored initial conditions
x = g[:x, (P=1,)=>(alg="alg1",)][1]
# there is only one node depending on (P=1,)=>(alg="alg1",), so that's why
# we take only the first element
results = simulation(x, alg="alg1")
add_nodes!(g, foldr(=>, ((P=1,), (alg="alg1",), (x=x,), (r=results,))))
# foldr(=>, dep) can be useful for building long dependency chanis form parts

Here we presented another way of querying the graph. We used the fact the initial conditions depend on the previously stored parameters and we retrieved them based on the hierarchy. After this step we have

id P alg x r
1 1 "alg1" 10. 12.
2 1 "alg1" 20. 22.
3 1 "alg1" 30. 32.

Now consider what would happen if in a second simulation we would have P=2, but still "alg1". As we can see with increasing complexity the columns corresponding to simulation parameters or metadata would contain a lot of redundant information. In the graph we can only store them once and keep track of things through paths. This is the main motivation for this package.

id P alg x r
1 1 "alg1" 10. 12.
2 1 "alg1" 20. 22.
3 1 "alg1" 30. 32.
4 2 "alg1" 20. 24.
5 2 "alg1" 40. 44.
6 2 "alg1" 60. 64.

About

Store hierarchical data in graphs in a non-redundant way

Topics

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Contributors 4

  •  
  •  
  •  
  •  

Languages