Update incorrect documentation regarding flash layout.

Layout changed with the introduction of partition tables in PR #2258, but reverted back to standard default layout in #2332.
SmingHub · Mar 11, 2024 · 9d94a3c · 9d94a3c
1 parent a124b33
commit 9d94a3c
Showing 1 changed file with 2 additions and 22 deletions.
diff --git a/docs/source/information/flash.rst b/docs/source/information/flash.rst
@@ -16,28 +16,6 @@ See :ref:`hardware_config` for details.
 
 A typical layout for a 4MByte device might look like this:
 
-   =======  ===============   ====   =========================  ===================================================                                
-   Address  Config variable   Size   Source filename            Description            
-   (hex)    (if any)          (KB)   (if applicable)            
-   =======  ===============   ====   =========================  ===================================================            
-   000000                     1      rboot.bin                  Boot loader            
-   001000                     4                                 rBoot configuration
-   002000                     4                                 Partition table
-   003000                     4      esp_init_data_default.bin  PHY configuration data
-   004000                     12     blank.bin                  System parameter area
-   006000                     4      blank.bin                  RF Calibration data (Initialised to FFh)
-   006000                     4                                 Reserved
-   008000   ROM_0_ADDR               rom0.bin                   First ROM image            
-   100000   RBOOT_SPIFFS_0
-   208000   ROM_1_ADDR               rom1.bin                   Second ROM image            
-   300000   RBOOT_SPIFFS_1
-   =======  ===============   ====   =========================  ===================================================            
-
-
-.. note::
-
-   This was the previous layout for a 4MByte flash device:
-
    =======  ===============   ====   =========================  ===================================================                                
    Address  Config variable   Size   Source filename            Description            
    (hex)    (if any)          (KB)   (if applicable)            
@@ -48,11 +26,13 @@ A typical layout for a 4MByte device might look like this:
    100000   RBOOT_SPIFFS_0
    202000   ROM_1_ADDR               rom1.bin                   Second ROM image            
    300000   RBOOT_SPIFFS_1
+   3FA000                     4                                 Partition table
    3FB000                     4      blank.bin                  RF Calibration data (Initialised to FFh)
    3FC000                     4      esp_init_data_default.bin  PHY configuration data            
    3FD000                     12     blank.bin                  System parameter area
    =======  ===============   ====   =========================  ===================================================            
 
+Note the addition of the  partition table, absent in Sming versions earlier than 4.3.
 
 
 Speed and caching