sumologic-collector Cookbook

This cookbook installs the Sumo Logic collector or updates an existing one if it was set to use Local Configuration Mangement. Installation on Linux uses the shell script installer and on Windows uses the exe installer. Here are the steps it follows:

1. Sets up sumo.conf and sumo.json (or the json folder). By default the standard Linux logs (system and security) are captured. On Windows the application and system event logs are captured.
2. Downloads latest installer
3. Runs installer
4. Starts collector and registers with the Sumo Logic service

For collector update, the existing collector must have been switched to use Local Configuration Mangement - see section Make the switch for more details. The steps the cookbook follows:

1. Verify that the collector folder exists.
2. (Optional) Recreate sumo.conf and sumo.json (or the json files under the json folder).
3. Restart the collector for the changes to take effect.

The collector Requires outbound access to https://collectors.sumologic.com. Edit sumo.json (or the json files under the json folder) to add/edit/remove sources. After installation you can test connectivity.

Note

Starting from 19.107, there are 2 major extensions to SumoLogic collectors:

• You can configure a collector's parameters from a set of json files under a common folder. Each of the json file will represent a source on that collector. Updates made to a json file will then be reflected on its corresponding source. Note that the format of this kind of file is slightly different from that of the traditional single json file (sumo.json) and they are not compatible. You also need to use the parameter syncSources instead of sources inside sumo.conf. See more details here.
• You can change a collector's existing parameters through local configuration json file(s) continuously. Before this, using collector API was the only option. More information about this is here

Installation

1. Create an Access Key
2. Install the cookbook in your Chef repo (your knife version should be at least 11.10.4 and you should have the knife github plugin installed):

knife cookbook github install SumoLogic/sumologic-collector-chef-cookbook

3. Specify data bag and item with your access credentials. The data item should contain attributes accessID and accessKey. Note that attribute names are case sensitive. If the cases mismatch, the values will not appear when chef-client runs. The default data bag/item is ['sumo-creds']['api-creds']
4. (Optional) Decide if you want to use the Local Configuration Management feature by setting the attribute default['sumologic']['local_management'] properly. By default this feature is on, to leverage the power of Chef.
5. (Optional) Select the json configuration option (i.e. through a single file or a folder) by setting the attribute default['sumologic']['use_json_path_dir'] appropriately. By default a single json file is used.
6. (Optional) Check if the path to the json file or the json folder is set correctly in the attribute default['sumologic']['sumo_json_path']. By default this is the path to the json file at /etc/sumo.json on Linux or c:\sumo\sumo.json on Windows.
7. Upload the cookbook to your Chef Server:

knife cookbook upload sumologic-collector

8. Add the sumologic-collector receipe to your node run lists. This step depends on your node configuration, so specifics will not be described in this README.md.

Attributes

['sumologic']['ephemeral']	Boolean	Sumo Logic Ephemeral Setting	Required
['sumologic']['installDir']	String	Sumo Logic Install Directory	Required
['sumologic']['credentials']['bag_name']	String	Name of the data bag.	Required
['sumologic']['credentials']['item_name']	String	Name of the item within the data bag.	Required
['sumologic']['credentials']['secret_file']	String	Path to the local file containing the encryption secret key.	Optional

Resource/Provider

sumologic_collector

Provides actions for installing and managing a SumoLogic Collector

Actions

default = :install_and_configure

:install

Installs an unconfigured and unregistered SumoLogic Collector. Use :configure to configure it later

sumologic_collector 'C:\sumo' do
  action :install
end

:install_and_configure

Installs and configures a SumoLogic Collector. This is the default action

sumologic_collector 'C:\sumo' do
  collector_name 'fileserver'
  sumo_access_id 'MYACCESSID'
  sumo_access_key 'MYACCESSKEY'
  proxy_host 'proxy.mydomain.com'
  proxy_port '8080'
end

:configure

Configures a pre-installed but unconfigured (and unregistered) SumoLogic Collector

Note: The recommended flow to use this is to have the collector installed without configuration or registration by using the :install action

sumologic_collector 'C:\sumo' do
  collector_name 'fileserver'
  sumo_access_id 'MYACCESSID'
  sumo_access_key 'MYACCESSKEY'
  proxy_host 'proxy.mydomain.com'
  proxy_port '8080'
  action :configure
end

:remove

Uninstalls a SumoLogic collector using the provided uninstaller

sumologic_collector 'C:\sumo' do
  action :remove
end

:start

Starts the SumoLogic Collector

sumologic_collector 'C:\sumo' do
  action :start
end

:stop

Stops the SumoLogic Collector

sumologic_collector 'C:\sumo' do
  action :stop
end

:restart

Restarts the SumoLogic Collector

sumologic_collector 'C:\sumo' do
  action :restart
end

Attribute Parameters

See the Sumo Logic documentation for more information about these attributes.

Attribute	Type	Description	Default	Required	Used Actions
dir	String	Directory where collector will be installed (name attribute)	none	true	all
source	String	URL to download collector installer from	none (uses the latest installer from SumoLogic)	false	:install, :install_and_configure
collector_name	String	Name of this Collector	nil	false	:install_and_configure, :configure
collector_url	String	URL used to register Collector for data collection API	nil	false	:install_and_configure, :configure
sumo_email	String	eMail address used when logging in with Email and Password	nil	false	:install_and_configure, :configure
sumo_password	String	Password used when logging in with Email and Password	nil	false	:install_and_configure, :configure
sumo_token_and_url	String	Encoded Setup Wizard token	nil	false	:install_and_configure
sumo_access_id	String	Access ID used when logging in with Access ID and Key	nil	false	:install_and_configure, :configure
sumo_access_key	String	Access Key used when logging in with Access ID and Key	nil	false	:install_and_configure, :configure
proxy_host	String	Sets proxy host when a proxy server is used	nil	false	:install_and_configure, :configure
proxy_port	String, Fixnum	Sets proxy port when a proxy server is used	nil	false	:install_and_configure, :configure
proxy_user	String	Sets proxy user when a proxy server is used with authentication	nil	false	:install_and_configure, :configure
proxy_password	String	Sets proxy password when a proxy server is used with authentication	nil	false	:install_and_configure, :configure
proxy_ntlmdomain	String	Sets proxy NTLM domain when a proxy server is used with NTLM authentication	nil	false	:install_and_configure, :configure
sources	String	Sets the JSON file describing sources to configure on registration	nil	false	:install_and_configure, :configure
sync_sources	String	Sets the JSON file describing sources to configure on registration, which will be continuously monitored and synchronized with the Collector's configuration	nil	false	:install_and_configure, :configure
ephemeral	Boolean	When true, the Collector will be deleted after goes offline for a certain period of time	false	false	:install_and_configure, :configure
clobber	Boolean	When true, if there is any existing Collector with the same name, that Collector will be deleted	false	false	:install_and_configure, :configure
disable_script_source	Boolean	If your organization's internal policies restrict the use of scripts, you can disable the creation of script-based Script Sources. When this parameter is passed, this option is removed from the Sumo Logic Web Application, and Script Source cannot be configured	false	false	:install_and_configure, :configure
runas_username	String	Which user the daemon will run as	nil	false	:install_and_configure, :install
winrunas_password	String	On Windows, the password for the user the service will run as	nil	false	:install_and_configure, :install
skip_registration	Boolean	When true the collector will not register upon installation	false	nil	:install_and_configure

sumologic_collector_installer

Note: sumologic_collector_installer has been deprecated, please use sumologic_collector with the :install_and_configure action (the default)

Allows for additional customisation of the Sumo Logic Collector installer

Actions

default = :install

• :install - installs the Sumo Logic Collector if it is not already installed

Attribute Parameters

See the Sumo Logic documentation for more information about these attributes.

• dir - Directory where the Collector will be installed
• source - URL where installer will be downloaded from
• collector_name
• collector_url
• sumo_email
• sumo_password
• sumo_token_and_url
• sumo_access_id
• sumo_access_key
• proxy_host
• proxy_port
• proxy_user
• proxy_password
• proxy_ntlmdomain
• sources
• sync_sources
• ephemeral
• clobber
• runas_username
• winrunas_password
• skip_registration

Examples

# Installs the Collector on Windows and skips registration
sumologic_collector_installer 'c:\sumo' do
  source 'https://collectors.sumologic.com/rest/download/win64'
  sumo_access_id node['SUMO_ACCESS_ID']
  sumo_access_key node['SUMO_ACCESS_KEY']
  skip_registration true
end

Collector Sources

Attribute Parameters

The following attributes are common to all of the sources listed below.

See the Sumo Logic documentation for more information about these attributes.

• owner - owner of the JSON Source configuration file
• group - group of the JSON Source configuration file
• mode - file mode of the JSON Source configuration file
• source_name - name of the source. required
• source_json_directory - directory where JSON Source configuration file will be stored. required
• description
• category
• host_name
• time_zone
• automatic_date_parsing
• multiline_processing_enabled
• use_autoline_matching
• manual_prefix_regexp
• force_time_zone
• default_date_format
• filters
• alive

sumo_source_docker

Actions

default = :create

• :create - creates a JSON Source configuration

Attribute Parameters

See the Sumo Logic documentation for more information about these attributes.

The following attribute parameters are in addition to the generic parameters listed above.

• uri
• specified_containers
• all_containers
• cert_path
• source_type - one of :docker_stats, :docker_log. required
• collect_events

Examples

sumo_source_docker 'docker_stats' do
  source_json_directory node['sumologic']['sumo_json_path']
  source_type :docker_stats
  uri 'https://127.0.0.1:2376'
  all_containers true
end

sumo_source_docker 'docker_log' do
  source_json_directory node['sumologic']['sumo_json_path']
  source_type :docker_log
  uri 'https://127.0.0.1:2376'
  all_containers true
end

sumo_source_local_file

Actions

default = :create

• :create - creates a JSON Source configuration

Attribute Parameters

See the Sumo Logic documentation for more information about these attributes.

The following attribute parameters are in addition to the generic parameters listed above.

• path_expression - required
• blacklist
• encoding

Examples

sumo_source_local_file 'local_file' do
  source_json_directory node['sumologic']['sumo_json_path']
  path_expression '/tmp/example'
end

sumo_source_local_windows_event_log

Actions

default = :create

• :create - creates a JSON Source configuration

Attribute Parameters

See the Sumo Logic documentation for more information about these attributes.

The following attribute parameters are in addition to the generic parameters listed above.

• log_names - required

Examples

sumo_source_local_windows_event_log 'local_win_event_log' do
  source_json_directory node['sumologic']['sumo_json_path']
  log_names ['security', 'application']
end

sumo_source_remote_file

Actions

default = :create

• :create - creates a JSON Source configuration

Attribute Parameters

See the Sumo Logic documentation for more information about these attributes.

The following attribute parameters are in addition to the generic parameters listed above.

• remote_hosts - required
• remote_port - required
• remote_user - required
• remote_password - required
• key_path - required
• key_password
• path_expression - required
• auth_method - one of key or password.
• blacklist

Examples

sumo_source_remote_file 'remote_file' do
  source_json_directory node['sumologic']['sumo_json_path']
  remote_hosts ['127.0.0.1']
  remote_port 22
  remote_user 'user'
  remote_password 'password'
  key_path ''
  path_expression '/tmp/example'
  auth_method 'password'
end

sumo_source_remote_windows_event_log

Actions

default = :create

• :create - creates a JSON Source configuration

Attribute Parameters

See the Sumo Logic documentation for more information about these attributes.

The following attribute parameters are in addition to the generic parameters listed above.

• domain - required
• username - required
• password - required
• hosts - required
• log_names - required

Examples

sumo_source_remote_windows_event_log 'remote_win_event_log' do
  source_json_directory node['sumologic']['sumo_json_path']
  domain 'mydomain'
  username 'user'
  password 'password'
  hosts ['myremotehost1']
  log_names ['security', 'application']
end

sumo_source_script

Actions

default = :create

• :create - creates a JSON Source configuration

Attribute Parameters

See the Sumo Logic documentation for more information about these attributes.

The following attribute parameters are in addition to the generic parameters listed above.

• commands - required
• file
• working_dir
• timeout
• script
• cron_expression

Examples

sumo_source_script 'script' do
  source_json_directory node['sumologic']['sumo_json_path']
  commands ['/bin/bash']
  cron_expression '0 * * * *'
end

sumo_source_syslog

Actions

default = :create

• :create - creates a JSON Source configuration

Attribute Parameters

See the Sumo Logic documentation for more information about these attributes.

The following attribute parameters are in addition to the generic parameters listed above.

• protocol
• port

Examples

sumo_source_syslog 'syslog' do
  source_json_directory node['sumologic']['sumo_json_path']
end

Contributing

This cookbook is meant to help customers use Chef to install Sumo Logic collectors, so please feel to fork this repository, and make whatever changes you need for your environment.

License and Authors

Authors: Ben Newton ([email protected]), Duc Ha ([email protected])