These tools allow you to convert flight data logs recorded by inav's Blackbox feature into CSV files (comma-separated values) for analysis, or into a series of PNG files which you could turn into a video.
You can download the latest executable versions of these tools for Linux, Mac or Windows from the "releases" tab above. If you're running Linux on ARM or FreeBSD, you must build the tools from source (instructions are further down this page).
This tool converts a flight log binary ".TXT" file into CSV format. Typical usage (from the command line) would be like:
blackbox_decode LOG00001.TXTThat'll decode the log to LOG00001.01.csv and print out some statistics about the log. If you're using Windows, you can drag and drop your log files onto blackbox_decode and they'll all be decoded. Please note that you shouldn't discard the original ".TXT" file, because it is required as input for other tools like the PNG image renderer.
If your log file contains GPS data then a ".gpx" file will also be produced. This file can be opened in Google Earth or some other GPS mapping software for analysis. This feature is experimental.
Use the --help option to show more details:
blackbox_decode --help
Blackbox flight log decoder by Nicholas Sherlock (vX.Y.Z, MMM DD YYYY hh:mm:ss)
Usage:
blackbox_decode [options] <input logs>
Options:
--help This page
--index <num> Choose the log from the file that should be decoded (or omit to decode all)
--limits Print the limits and range of each field
--stdout Write log to stdout instead of to a file
--datetime Add a dateTime column with UTC date time
--unit-amperage <unit> Current meter unit (raw|mA|A), default is A (amps)
--unit-flags <unit> State flags unit (raw|flags), default is flags
--unit-frame-time <unit> Frame timestamp unit (us|s), default is us (microseconds)
--unit-height <unit> Height unit (m|cm|ft), default is cm (centimeters)
--unit-rotation <unit> Rate of rotation unit (raw|deg/s|rad/s), default is raw
--unit-acceleration <u> Acceleration unit (raw|g|m/s2), default is raw
--unit-gps-speed <unit> GPS speed unit (mps|kph|mph), default is mps (meters per second)
--unit-vbat <unit> Vbat unit (raw|mV|V), default is V (volts)
--merge-gps Merge GPS data into the main CSV log file instead of writing it separately
--simulate-current-meter Simulate a virtual current meter using throttle data
--sim-current-meter-scale Override the FC's settings for the current meter simulation
--sim-current-meter-offset Override the FC's settings for the current meter simulation
--simulate-imu Compute tilt/roll/heading fields from gyro/accel/mag data
--imu-ignore-mag Ignore magnetometer data when computing heading
--declination <val> Set magnetic declination in degrees.minutes format (e.g. -12.58 for New York)
--declination-dec <val> Set magnetic declination in decimal degrees (e.g. -12.97 for New York)
--debug Show extra debugging information
--raw Don't apply predictions to fields (show raw field deltas)
This tool converts a flight log binary ".TXT" file into a series of transparent PNG images that you could overlay onto your flight video using a video editor (like DaVinci Resolve ). Typical usage (from the command line) would be like:
blackbox_render LOG00001.TXTThis will create PNG files at 30 fps into a new directory called LOG00001.01 next to the log file.
Use the --help option to show more details:
Blackbox flight log renderer by Nicholas Sherlock
Usage:
blackbox_render [options] <logfilename.txt>
Options:
--help This page
--index <num> Choose which log from the file should be rendered
--width <px> Choose the width of the image (default 1920)
--height <px> Choose the height of the image (default 1080)
--fps FPS of the resulting video (default 30)
--prefix <filename> Set the prefix of the output frame filenames
--start <x:xx> Begin the log at this time offset (default 0:00)
--end <x:xx> End the log at this time offset
--[no-]draw-pid-table Show table with PIDs and gyros (default on)
--[no-]draw-craft Show craft drawing (default on)
--[no-]draw-sticks Show RC command sticks (default on)
--[no-]draw-time Show frame number and time in bottom right (default on)
--[no-]plot-motor Draw motors on the upper graph (default on)
--[no-]plot-pid Draw PIDs on the lower graph (default off)
--[no-]plot-gyro Draw gyroscopes on the lower graph (default on)
--smoothing-pid <n> Smoothing window for the PIDs (default 4)
--smoothing-gyro <n> Smoothing window for the gyroscopes (default 2)
--smoothing-motor <n> Smoothing window for the motors (default 2)
--prop-style <name> Style of propeller display (pie/blades, default pie)
--gapless Fill in gaps in the log with straight lines
(At least on Windows) if you just want to render a log file using the defaults, you can drag and drop a log onto the blackbox_render program and it'll start generating the PNGs immediately.
DaVinci Resolve is one free option for turning your PNGs into a video that is synced with your flight video.
In Resolve, create a new project. On the Media tab, find your flight video and drag it from the top pane to the bottom one to add it to your media library. When prompted, choose the option to change your framerate/resolution settings to match the video you added. Now add the PNG series that you rendered with blackbox_render (it'll be represented as a single file). If the PNGs don't appear in the media library, try right clicking on the folder that contains them and
selecting "Refresh".
Now over on the Edit tab, click File -> New Timeline and click Ok. At the top left, switch over to the Media Pool. Drag and drop your flight video onto the timeline, then drag and drop the Blackbox stream onto the video track above it. You'll need to play around with the alignment between the two tracks to sync things up (I usually sync up the audio from the initial throttle-up with the throttle-up shown on the motor graph).
If your Blackbox PNGs were rendered using the default settings (30 FPS) and your flight video is 60 FPS, you'll need to right-click on the Blackbox stream and click "change clip speed". Enter 30 FPS since this is the FPS that you rendered the Blackbox PNGs at.
Save your viewers' ears by dragging the midpoint of the audio track downwards to reduce its volume, or replace the audio with your own music track!
Now on the Deliver tab, choose something like the "video sharing export" Easy Setup preset. On the left pane, choose an output folder for the "render to:" setting. Then click the "add job to render queue" button on the left. Now click the "start render" button on the right to begin rendering the output.
If you just want to download some prebuilt versions of these tools, head to the "releases" tab on the GitHub page. However, if you want to build your own binaries, or you're an unsupported platform where we haven't provided binaries, please read on.
The blackbox_decode tool for turning binary flight logs into CSV doesn't depend on any libraries, so can be built by running make obj/blackbox_decode. You can add the resulting obj/blackbox_decode program to your system path to make it easier to run.
The blackbox_render tool renders a binary flight log into a series of PNG images which you can overlay on your flight video. Please read the section below that most closely matches your operating system for instructions on getting the libcairo library required to build the blackbox_render tool.
You will need gcc (or clang), make and libcairo2 (development files).
For Debian (Ubuntu etc.), you can get the tools required for building by entering these commands into the terminal:
sudo apt-get update
sudo apt-get install make gcc libcairo2-devOtherwise, search the distro package manager and install equivalents.
Then, build blackbox_render by running make obj/blackbox_render (or build both tools by just running make).
You will need clang (cc), gmake and libcairo2. Use pkg to install.
Then:
gmake
The easiest way to build is to install the Xcode development tool, then install an environment like Homebrew or MacPorts onto your system.
From MacPorts, you would do this to get LibCairo:
sudo port selfupdate
sudo port install cairoAfterwards you can run make to build blackbox_render.
If you are using Homebrew instead of MacPorts, run:
brew install cairo --without-x11 pkg-configAfterwards you can run make to build blackbox_render.
If you get an error "Package 'xcb-shm', required by 'cairo', not found", your installed version of Cairo depends on X11 but your Homebrew X11 libraries are not on your pkgconfig path, so the build process cannot find them. Try this to add them to your path:
$ export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig:/opt/X11/lib/pkgconfigMacos blacbox_decode can also be cross-compiled on Linux using the supplied Makefile.
Historically, the tools can be built with Visual Studio Express 2013; open up the solution in the visual-studio/ folder. You'll need to include the .DLL files from lib/win32 in the same directory as your built executable.
The tools can also be cross-compiled on Linux (Win32 blackbox_decode and blackbox_render, Win64 blackbox_decode) using the supplied Makefile, or built natively in MSys2 (Win32 and Win64).
This project is licensed under GPLv3.
The binary version of blackbox_render for MacOSX is statically linked to these libraries:
- libbz2 http://www.bzip.org/ (BSD-like)
- zlib http://www.zlib.net/ (Zlib)
- libcairo & libpixman http://cairographics.org/ (LGPL)
- libfreetype http://www.freetype.org/ (BSD-like/GPLv2)
- libpng16 http://www.libpng.org/pub/png/libpng.html (PNG)
The windows binary (win32) of blackbox_render additionally ships with these DLLs:
- libiconv https://www.gnu.org/software/libiconv/ (LGPL)
- libfontconfig http://www.freedesktop.org/wiki/Software/fontconfig/
- libxml2 http://xmlsoft.org/ (MIT)
- liblzma http://tukaani.org/xz/ (Public Domain)
This font is included with source distributions:
- Source Sans Pro - Regular https://github.com/adobe-fonts/source-sans-pro (SIL Open Font license)
Both binary and source builds include IMU code from Baseflight https://github.com/multiwii/baseflight (GPLv3)