Copyright 2025 SuperHouse Automation Pty Ltd www.superhouse.tv
A general-purpose I/O module for the Testomatic PCB test jig system and other projects.
Testomatic provides sockets for I/O modules, allowing the capabilities of the test jig to be customised to suit specific requirements. This module is designed to be a generic I/O module that provides basic features to cover typical use cases where high ADC precision, etc is not required.
Features:
- AD5593R I/O expander.
- 8 I/O pins.
- I2C interface.
- 3.3V or 5V control interface.
- 3.3V or 5V I/O interface.
- Every pin can be individually configured.
- Digital I/O on every pin.
- 12-bit ADC on every pin.
- 12-bit DAC on every pin.
Note: The format is DIP, but it's NOT on a 0.1" grid! That means you can't plug it into a breadboard. The format is 2mm pitch metric DIP with 10mm row spacing center-to-center.
More information:
This project is saved as Fusion360 board and schematic files.
Designed by Jonathan Oxer [email protected]
The specific terms of distribution of this project are governed by the license referenced below.
Licensed under the TAPR Open Hardware License (www.tapr.org/OHL). The "license" folder within this repository also contains a copy of this license in plain text format.