Skip to content

Gamepad firmware for Raspberry Pi Pico and other RP2040 microcontrollers supporting Nintendo Switch, XInput and DirectInput

License

Notifications You must be signed in to change notification settings

TheTrainGoes/GP2040-CE-OLD

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

GP2040 Community Edition Firmware

GP2040-CE is a gamepad firmware for the Raspberry Pi Pico and other boards based on the RP2040 microcontroller, and provides high performance with a rich feature set across multiple platforms. GP2040-CE is compatible with PC, MiSTer, Android, Raspberry Pi, Nintendo Switch, PS3 and PS4 (legacy controller support).

Full documentation can be found at http://www.gp2040-ce.info.

Features

  • Selectable input modes - XInput, DirectInput, and Nintendo Switch
  • Overclocked polling rate for less than 1 ms of input latency in all modes
  • Multiple SOCD cleaning modes - Neutral, Up Priority (a.k.a. Hitbox), and Second Input Priority
  • Left and Right stick emulation via D-pad inputs as well as dedicated toggle switches
  • Turbo and Turbo LED with selectable speed
  • Per-button RGB LED support
  • PWM Player indicator LED support (XInput only)
  • Multiple profile support
  • Support for 128x64 monochrome I2C displays - SSD1306, SH1106, and SH1107 compatible
  • Built-in, embedded web configuration - no download required!

Visit the GP2040-CE Usage page for more details.

Performance

Input latency is tested using the methodology outlined at WydD's inputlag.science website, using the default 1000 Hz (1 ms) polling rate in the firmware.

Version Mode Poll Rate Min Max Avg Stdev % on time %1f skip %2f skip
v0.3.1 All 1 ms 0.56 ms 1.32 ms 0.85 ms 0.24 ms 95.95% 4.05% 0%

Full results can be found in the GP2040-CE Firmware Latency Test Results Google Sheet.

Installation

Prebuilt uf2 files are available in the Releases section.

Currently only a basic RaspBerry Pi Pico setup is supported.

If you have any of the following products or setups we would recommend waiting until their devices are tested with this new firmware

Several other working example configurations are located in the configs folder.

The instructions will slightly vary based on your device. These instructions are for a Raspberry Pi Pico.

If the device has been previously used for something other than GP2040-CE, please flash this file first to clear the on-board storage: flash_nuke.uf2. After flashing the nuke file, wait a minute for the clear program to run and the RPI-RP2 drive to reappear.

  1. Download the latest GP2040.uf2 file from the Releases section for your board (e.g. GP2040-PiPico.uf2 for the Raspberry Pi Pico).
  2. Unplug your Pico.
  3. Hold the BOOTSEL button on the Pico and plug into your computer. A new removable drive named RPI-RP2 should appear in your file explorer.
  4. Drag and drop the GP2040.uf2 file into the removable drive. This will flash the board.
  5. The board is now running the GP2040-CE firmware and will appear as a controller on your computer.

Support

If you would like to discuss features, issues or anything else related to GP2040 please create an issue or join the OpenStick GP2040-CE Discord channel.

Frequently Asked Questions

Which input mode should I use?

Generally speaking, XInput will be the mode of choice for everything except Nintendo Switch and PlayStation 3. XInput mode is the most fully-featured, has the best compatibility with PC games, and is compatible with console adapters like the Brook Wingman product line. All things being equal, performance is the same in all modes.

What is the extent of PS4 support in GP2040-CE?

GP2040-CE will work on PS4 games that implement support for legacy PS3 controllers. Many of the popular PS4 fighting games support them.

Will GP2040-CE natively support PS4, PS5, Xbox One, or Xbox Series consoles?

These consoles implement security measures that prevent unauthorized accessories from being used. The process of cracking or bypassing that security may not be legal everywhere. These consoles could be supported in the future if a user-friendly and completely legal implementation method is found.

Can I use multiple controllers with GP2040-CE on the same system?

Yes! Each GP2040-CE board is treated as a separate controller. However, be sure to only run the embedded web configurator for each controller one at a time.

Does GP2040-CE really have less than 1 ms of input latency?

Yes! If your platform supports 1000 Hz USB polling, input latency is less than 1ms. GP2040-CE is configured for 1000 Hz / 1 ms polling by default in all modes, however some systems override or ignore the polling rate the controller requests. The 1000 Hz polling rate is confirmed to work on PC and MiSTer. Even if your platform doesn't support high rate USB polling, GP2040-CE is still reading and processing your inputs as fast as the target system will allow.

Do the additional features like RGB LEDs, Player LEDs, and OLED displays affect performance?

No! GP2040-CE dedicates a processing core to just reading and writing player inputs. All secondary functions such as LEDs and displays are controlled by the secondary processor core. No matter how crazy the feature set becomes, GP2040-CE is unlikely to introduce any additional input latency.

Why do the buttons have weird labels like B3, A1, S2, etc.?

GP2040-CE uses a generic system for handling button inputs that resembles a traditional PlayStation controller layout with a few extra buttons. This means 4 face buttons (B1-B4), 4 shoulder buttons (L1, L2, R1, R2), Select and Start (S1, S2), 2 stick buttons (L3, R3) and 2 auxiliary buttons for things like Home and Capture (A1, A2) on the Switch. The GP2040-CE documentation and web configurator have a dropdown to change the labels to more familiar controller layouts. You can refer to the button mapping table on the GP2040 Usage page.

Why use PlatformIO instead of <insert favorite project setup>?

Setting up a development environment to build Pico SDK projects is a manual process which requires several components to be installed and configured. Using PlatformIO allows easy installation and updating of build and project dependencies. This makes for a less confusing experience for new developers and people that just want to make a few tweaks for a custom build.

What kind of voodoo is that embedded web configurator?

There's no magic here, just some useful libraries working together:

  • Single page application using React and Bootstrap is embedded in the GP2040-CE firmware
  • TinyUSB library provides virtual network connection over USB via RNDIS
  • lwIP library provides an HTTP server for the embedded React app and the web configuration API
  • ArduinoJson library is used for serialization and deserialization of web API requests

Contributing

Want to help improve GP2040-CE? There are a bunch of ways to contribute!

Pull Requests

Pull requests are welcome and encouraged for enhancements, bug fixes and documentation updates.

Please respect the coding style of the file(s) you are working in, and enforce the use of the .editorconfig file when present.

Discussions

Join the OpenStick GP2040-CE Discord channel to participate!

Acknowledgements

About

Gamepad firmware for Raspberry Pi Pico and other RP2040 microcontrollers supporting Nintendo Switch, XInput and DirectInput

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C 92.7%
  • C++ 5.9%
  • JavaScript 1.3%
  • Other 0.1%