Lotus 58 USB-C v1.42

Lotus 58 USB-C v1.42
Tweaked to allow PCBA

Lotus 58 TRRS v1.29

Corrected function for RGB/Power switch

Lotus 58 USB-C v1.41

Silkscreen tweaks

Lotus 58 TRRS v1.28

Version 1.28 adds the following functions:
Possible to select the function of the external switch, setting it as a power switch for wireless builds, or to select RGB for a wired build.

Lotus 58 USB-C v1.40

Moved serial data to D+/- for better cable compatibility.
Added solder jumpers for RGB selection without switch

Lotus 58 TRRS v1.27

Improved Silkscreen/build instructions on PCB

Lotus 58 Glow 1.26

Brings TRRS variant to feature parity with USB C variant.

• All RGB can be soldered, and either glow or key can be selected to be active (drawing power)
• Switch positions are the same as USB-C so reset and power switch can now be on both sides of PCB (easier 3D printing)
• Better footprints, so easier to solder.

Since the TRRS version already have a power switch, the RGB is an internal switch, placed where you need to disassemble, alternatively hard soldered jumpers.

Lotus 58 Glow 1.33

This release adds an USB type C link between hands, along with ESD protection allowing hot plugging.
Revamped RGB circuit allows ALL RGB to be soldered in place, and switches the powerline instead of the data line as previously.

Lot's of minor tweaks.

Note: File was regenerated with no functional changes as a ground fill had failed to update. No change to version number

Files for laser/CNC cut plates

DFX files of all optional plates.

Keep in mind, these files have no tool kerf, and this will need to be added as per manufacturers specifications, either by you, or by the manufacturer if they offer that service.

Lotus 58 Glow 1.30

Adds USB type C link to Lotus