[PP-535] Publish S8 profiles

Ultimaker · Feb 12, 2025 · fbe5e4f · fbe5e4f
1 parent 5fbe0a1
commit fbe5e4f
Show file tree

Hide file tree

Showing 44 changed files with 1,323 additions and 0 deletions.
diff --git a/resources/definitions/ultimaker_s8.def.json b/resources/definitions/ultimaker_s8.def.json
diff --git a/resources/extruders/ultimaker_s8_extruder_left.def.json b/resources/extruders/ultimaker_s8_extruder_left.def.json
@@ -0,0 +1,31 @@
+{
+    "version": 2,
+    "name": "Extruder 1",
+    "inherits": "fdmextruder",
+    "metadata":
+    {
+        "machine": "ultimaker_s8",
+        "position": "0"
+    },
+    "overrides":
+    {
+        "extruder_nr":
+        {
+            "default_value": 0,
+            "maximum_value": "1"
+        },
+        "extruder_prime_pos_x": { "default_value": -3 },
+        "extruder_prime_pos_y": { "default_value": 6 },
+        "extruder_prime_pos_z": { "default_value": 2 },
+        "machine_extruder_end_pos_abs": { "default_value": true },
+        "machine_extruder_end_pos_x": { "default_value": 330 },
+        "machine_extruder_end_pos_y": { "default_value": 237 },
+        "machine_extruder_start_code": { "value": "\"M214 K{material_pressure_advance_factor} R0.04\"" },
+        "machine_extruder_start_pos_abs": { "default_value": true },
+        "machine_extruder_start_pos_x": { "default_value": 330 },
+        "machine_extruder_start_pos_y": { "default_value": 237 },
+        "machine_nozzle_head_distance": { "default_value": 2.7 },
+        "machine_nozzle_offset_x": { "default_value": 0 },
+        "machine_nozzle_offset_y": { "default_value": 0 }
+    }
+}
diff --git a/resources/extruders/ultimaker_s8_extruder_right.def.json b/resources/extruders/ultimaker_s8_extruder_right.def.json
@@ -0,0 +1,31 @@
+{
+    "version": 2,
+    "name": "Extruder 2",
+    "inherits": "fdmextruder",
+    "metadata":
+    {
+        "machine": "ultimaker_s8",
+        "position": "1"
+    },
+    "overrides":
+    {
+        "extruder_nr":
+        {
+            "default_value": 1,
+            "maximum_value": "1"
+        },
+        "extruder_prime_pos_x": { "default_value": 333 },
+        "extruder_prime_pos_y": { "default_value": 6 },
+        "extruder_prime_pos_z": { "default_value": 2 },
+        "machine_extruder_end_pos_abs": { "default_value": true },
+        "machine_extruder_end_pos_x": { "default_value": 330 },
+        "machine_extruder_end_pos_y": { "default_value": 219 },
+        "machine_extruder_start_code": { "value": "\"M214 K{material_pressure_advance_factor} R0.04\"" },
+        "machine_extruder_start_pos_abs": { "default_value": true },
+        "machine_extruder_start_pos_x": { "default_value": 330 },
+        "machine_extruder_start_pos_y": { "default_value": 219 },
+        "machine_nozzle_head_distance": { "default_value": 4.2 },
+        "machine_nozzle_offset_x": { "default_value": 22 },
+        "machine_nozzle_offset_y": { "default_value": 0 }
+    }
+}
diff --git a/resources/images/UltimakerS8backplate.png b/resources/images/UltimakerS8backplate.png
diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm_engineering.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_abs
+quality_type = draft
+setting_version = 24
+type = intent
+variant = AA+ 0.4
+
+[values]
+infill_sparse_density = 20
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe_0.2mm_engineering.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_cpe
+quality_type = draft
+setting_version = 24
+type = intent
+variant = AA+ 0.4
+
+[values]
+infill_sparse_density = 20
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_nylon_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_nylon_0.2mm_engineering.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_nylon
+quality_type = draft
+setting_version = 24
+type = intent
+variant = AA+ 0.4
+
+[values]
+infill_sparse_density = 20
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm_engineering.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_petg
+quality_type = draft
+setting_version = 24
+type = intent
+variant = AA+ 0.4
+
+[values]
+infill_sparse_density = 20
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm_engineering.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_pla
+quality_type = draft
+setting_version = 24
+type = intent
+variant = AA+ 0.4
+
+[values]
+infill_sparse_density = 20
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm_engineering.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_tough_pla
+quality_type = draft
+setting_version = 24
+type = intent
+variant = AA+ 0.4
+
+[values]
+infill_sparse_density = 20
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_cpe_plus
+quality_type = draft
+setting_version = 24
+type = intent
+variant = CC+ 0.4
+
+[values]
+infill_sparse_density = 20
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_pc_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_pc_0.2mm_engineering.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_pc
+quality_type = draft
+setting_version = 24
+type = intent
+variant = CC+ 0.4
+
+[values]
+infill_sparse_density = 20
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm_engineering.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_petcf
+quality_type = draft
+setting_version = 24
+type = intent
+variant = CC+ 0.4
+
+[values]
+infill_sparse_density = 20
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+definition = ultimaker_s8
+name = Fast
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = draft
+setting_version = 24
+type = quality
+variant = AA+ 0.4
+weight = -2
+
+[values]
+cool_min_layer_time = 4
+cool_min_layer_time_fan_speed_max = 9
+cool_min_temperature = =material_print_temperature - 10
+material_print_temperature = =default_material_print_temperature + 5
+retraction_prime_speed = 15
+support_structure = tree
+
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_cpe_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_cpe_0.2mm.inst.cfg
@@ -0,0 +1,20 @@
+[general]
+definition = ultimaker_s8
+name = Fast
+version = 4
+
+[metadata]
+material = generic_cpe
+quality_type = draft
+setting_version = 24
+type = quality
+variant = AA+ 0.4
+weight = -2
+
+[values]
+infill_overlap = 20
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'gyroid'
+speed_print = 100
+speed_wall_0 = =speed_print
+support_interface_enable = True
+
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_nylon_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_nylon_0.2mm.inst.cfg
@@ -0,0 +1,20 @@
+[general]
+definition = ultimaker_s8
+name = Fast
+version = 4
+
+[metadata]
+material = generic_nylon
+quality_type = draft
+setting_version = 24
+type = quality
+variant = AA+ 0.4
+weight = -2
+
+[values]
+cool_min_layer_time = 6
+cool_min_layer_time_fan_speed_max = 11
+material_print_temperature = =default_material_print_temperature + 5
+raft_airgap = 0.4
+retraction_prime_speed = 15
+
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_s8
+name = Fast
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = draft
+setting_version = 24
+type = quality
+variant = AA+ 0.4
+weight = -2
+
+[values]
+cool_min_layer_time = 4
+material_print_temperature = =default_material_print_temperature + 5
+
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.1mm.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_s8
+name = Fine
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = normal
+setting_version = 24
+type = quality
+variant = AA+ 0.4
+weight = 0
+
+[values]
+retraction_prime_speed = =retraction_speed
+support_structure = tree
+
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_s8
+name = Fast
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = draft
+setting_version = 24
+type = quality
+variant = AA+ 0.4
+weight = -2
+
+[values]
+retraction_prime_speed = =retraction_speed
+support_structure = tree
+