Skip to content

VCTLabs/cp210x-program

Repository files navigation

cp210x-program

CI Status Wheel Status Release Status Pylint Status

GitHub tag License Python Pylint score

pre-commit

The goal of this library is to provide access to the EEPROM of an Silabs CP210x under Linux.

Warning

THE LEGACY VERSION OF cp210x-program IS NOT FULLY TESTED, AND MAY RENDER YOUR CP210x USELESS OR DESTROY IT. Be aware that the current (legacy) version was only tested on the original CP2102 part. Similarly, the cp2102N programmer in ext/badge is only "lightly" tested here. Be warned...

Quick Start

The CP210x is a series of USB-to-serial chip used in a lot of USB devices (similar to FTDIs and PL2303). Certain CP210x devices have an EEPROM on the chip which can be programmed via USB, while others only have the OTP EPROM (which cannot be reprogrammed; see Model notes). Silabs provides various source code examples for Windows and Linux, and multiple drivers for Windows.

The original cp210x-program uses results from monitoring the USB bus when the windows library programs the CP210x device. The windows library was not disassembled for the original protocol analysis.

Dependencies

  • Python >= 3
  • PyUSB

For the external cp2102N tool:

  • GNU or clang toolchain
  • make
  • libusb-1.0

Since libusb is available on most Linux, Mac OS X and FreeBSD cp210x-program should run flawlessly on these platforms. Currently it is tested in Github CI on Linux (Ubuntu), MacOS, and Windows (note the latter relies on the base GNU libraries and tools installed on the Github CI runners).

If cp210x-program should run as non-root user, add the udev rule found in doc/45-cp210x-programming.rules to /etc/udev/rules.d. When devices with already programmed IDs are reprogrammed at this IDs to 45-cp210x-programming.rules.

Install deps on Ubuntu:

$ sudo apt install python3-usb

Usage

Read EEPROM content into hexfile:

$ cp210x-program --read-cp210x -f eeprom-content.hex

Show EEPROM content from device 002 on bus 001:

$ cp210x-program --read-cp210x -m 001/002

Hint: The bus and device number can be queried using the `lsusb -t` command, which is available on most linux distributions.

Write some data to device with vendor id 0x10C4 and product id 0xEA62:

$ cp210x-program --write-cp210x -m 10C4:EA62 \
               --set-product-string="Product String" \
               --set-max-power=100 \
               --set-bus-powered=no

Write default data to device:

$ cp210x-program --write-cp210x -F testdata/cp2102-orig.hex

This is for example required when the baud rate table is corrupted and the CP210x always uses 500kBit/sec as baudrate.

TODO

  • (re)Test on CP2102 and CP2103 (legacy parts)
  • read config blob from CP2102N (new part)

Dev tools

Local tool dependencies to aid in development; install both tools for maximum enjoyment.

Tox

As long as you have git and at least Python 3.6, then you can install and use tox. After cloning the repository, you can run the repo checks with the tox command. It will build a virtual python environment for each installed version of python with all the python dependencies and run the specified commands, eg:

$ git clone https://github.com/VCTLabs/cp210x-program
$ cd cp210x-program/
$ tox -e py

The above will run the default test commands using the (local) default Python version. To specify the Python version and host OS type, run something like:

$ tox -e py39-linux

To build and check the Python package, run:

$ tox -e deploy,check

Full list of additional tox commands:

  • tox -e deploy will build the python packages and run package checks
  • tox -e check will install the wheel package from above and run the script
  • tox -e lint will run pylint (somewhat less permissive than PEP8/flake8 checks)
  • tox -e readhex will install the wheel package and try to read from a legacy device
  • tox -e read will read the bulk USB descriptors from a device with SiLabs vendor ID
  • tox -e badge will build the external cp2102N tool => /ext/badge/bin/
  • tox -e clean will clean the above bin directory

For the tox -e badge command, you may want to set the CC variable either in your shell environment or on the command-line, eg:

$ CC=gcc tox -e badge

Pre-commit

This repo is now pre-commit enabled for python/rst source and file-type linting. The checks run automatically on commit and will fail the commit (if not clean) and perform simple file corrections. If the mypy check fails on commit, you must first fix any fatal errors for the commit to succeed. That said, pre-commit does nothing if you don't install it first (both the program itself and the hooks in your local repository copy).

You will need to install pre-commit before contributing any changes; installing it using your system's package manager is recommended, otherwise install with pip into your usual virtual environment using something like:

$ sudo emerge pre-commit  --or--
$ pip install pre-commit

then install it into the repo you just cloned:

$ git clone https://github.com/VCTLabs/cp210x-program
$ cd cp210x-program/
$ pre-commit install

It's usually a good idea to update the hooks to the latest version:

$ pre-commit autoupdate

Most (but not all) of the pre-commit checks will make corrections for you, however, some will only report errors, so these you will need to correct manually.

Automatic-fix checks include ffffff, isort, autoflake, the json/yaml/xml format checks, and the miscellaneous file fixers. If any of these fail, you can review the changes with git diff and just add them to your commit and continue.

If any of the mypy or rst source checks fail, you will get a report, and you must fix any errors before you can continue adding/committing.

To see a "replay" of any rst check errors, run:

$ pre-commit run rst-backticks -a
$ pre-commit run rst-directive-colons -a
$ pre-commit run rst-inline-touching-normal -a

To run all pre-commit checks manually, try:

$ pre-commit run -a

Device Info

Updated vendor links and basic model info; see the individual product descriptions and data sheets for details.

Model notes

Taken from the respective device Data Sheets:

  • CP2101 - EEPROM (512 byte) may work
  • CP2102 - EEPROM (1024 byte) should work
  • CP2103 - EEPROM (1024 byte) should work
  • CP2104 - EPROM only (1024 byte, not re-programmable)
  • CP2105 - EPROM only (296 byte, not re-programmable)
  • CP2109 - EPROM only (1024 byte, not re-programmable)
  • CP2102N - EEPROM (960 byte) will not work with legacy cp210x-program

The following table from AN721 shows the default SiLabs USB device IDs; note third-party manufacturers often do not reprogram with their own vendor/product IDs.

CP120x device IDs

Links

License

The python package 'cp210x' and the python script 'cp210x-program' are provided under the terms of the GNU LGPL. See LICENSE. Otherwise, anything under the ext directory tree has its own license/copyrights.

Current external sources: