VzBot 1.1 CU4

Enclosure:

• Trim on all enclosure acrylic pannels
• Front top cover handles (to help lift the cover)
• Front door hinges redesigned. No more need to glue them. 2 Bolts needed
• Front door latches. Now using 2x5 magnets instead.
• Frame Feet (reusing the Tronxy rubber feet)
• New exhaust fan guard
• New exhaust fume extractor (reusing the same HEPA and carbon activated filter)
• Rear top cover hinges. With tensioner for motor. And stopper at 80 degree now to help the balance
• Acrylic pannels holes added
• Updated Back plate with cutouts for wires, holes for DIN rails, and included a rough Electronic layout suggestion

Z group:

• Updated Z switch mount and Z height adjustement screw mount. Moved to the right side to clear Y stop switch
• Added Z belt to cad
• Fixed Lower lead screw support M4 holes (they were too small)

EVA printhead:

• EVA back plate with no tensioner and new cable holder

Bed:

• Removed Glass bed
• Bed plate changed from 6mm to 8mm in cad

Gantry:

• Y stop switch mount fixed. (holes were missing for the 2 M2 screws)
• XY Motor mounts with tensioners

RSCS:

• Modified lower duct part. Added a second mounting point to the 120mm fan

Electronic:

• Updated 120V power socket/switch. (relocated to mount to back plate)

Upcoming addons:
-enclosure recirculation filter for VOC
-3 z ?