Options_en

Options

These are available options for WIZnet-S2E-Tool.

Optional arguments:

    -h, --help            show this help message and exit
    -d MACADDR, --device MACADDR
                            Device mac address to configuration
    -a, --all             Configuration about all devices (in mac_list.txt)
    -c, --clear           Mac list clear
    -v, --version         Version information

Configuration:

    -s, --search          Search devices (in same network)
    -r, --reset           Reboot device
    -f, --factory         Factory reset
    -m ipaddr, --multiset ipaddr
                            Set IP address for all devices in 'mac_list.txt'. Parameter is first address.
    -u FWFILE, --upload FWFILE
                            Firmware upload from file

General Options:

    --alloc {0,1}         IP address allocation method (0: Static, 1: DHCP)
    --ip IP               Local ip address
    --subnet SUBNET       Subnet mask
    --gw GW               Gateway address
    --dns DNS             DNS server address

Channel #0 Options:

    --port0 PORT0         Local port number
    --nmode0 {0,1,2,3}    Network operation mode (0: tcpclient, 1: tcpserver, 2: mixed, 3: udp)
    --rip0 IP             Remote host IP address / Domain
    --rport0 PORT         Remote host port number
    --baud0 BAUD0         baud rate (300|600|1200|1800|2400|4800|9600|14400|19200|28800|38400|57600|115200|230400)
    --data0 {0,1}         data bit (0: 7-bit, 1: 8-bit)
    --parity0 {0,1,2}     parity bit (0: NONE, 1: ODD, 2: EVEN)
    --stop0 {0,1}         stop bit (0: 1-bit, 1: 2-bit)
    --flow0 {0,1,2}       flow control (0: NONE, 1: XON/XOFF, 2: RTS/CTS)
    --time0 TIME0         Time delimiter (0: Not use / 1~65535: Data packing time (Unit: millisecond))
    --size0 SIZE0         Data size delimiter (0: Not use / 1~255: Data packing size (Unit: byte))
    --char0 CHAR0         Designated character delimiter (00: Not use / Other: Designated character)
    --it timer            Inactivity timer value for TCP connection close
                            when there is no data exchange (0: Not use / 1~65535: timer value)
    --ka {0,1}            Keep-alive packet transmit enable for checking TCP connection established
    --ki number           Initial TCP keep-alive packet transmission interval value
                            (0: Not use / 1~65535: Initial Keep-alive packet transmission interval (Unit: millisecond))
    --ke number           TCP Keep-alive packet transmission retry interval value
                            (0: Not use / 1~65535: Keep-alive packet transmission retry interval (Unit: millisecond))
    --ri number           TCP client reconnection interval value [TCP client only]
                            (0: Not use / 1~65535: TCP client reconnection interval (Unit: millisecond))

Channel #1 Options:

    --port1 PORT1         Local port number
    --nmode1 {0,1,2,3}    Network operation mode (0: tcpclient, 1: tcpserver, 2: mixed, 3: udp)
    --rip1 IP             Remote host IP address / Domain
    --rport1 PORT         Remote host port number
    --baud1 BAUD1         baud rate (300|600|1200|1800|2400|4800|9600|14400|19200|28800|38400|57600|115200|230400)
    --data1 {0,1}         data bit (0: 7-bit, 1: 8-bit)
    --parity1 {0,1,2}     parity bit (0: NONE, 1: ODD, 2: EVEN)
    --stop1 {0,1}         stop bit (0: 1-bit, 1: 2-bit)
    --flow1 {0,1,2}       flow control (0: NONE, 1: XON/XOFF, 2: RTS/CTS)
    --time1 TIME1         Time delimiter (0: Not use / 1~65535: Data packing time (Unit: millisecond))
    --size1 SIZE1         Data size delimiter (0: Not use / 1~255: Data packing size (Unit: byte))
    --char1 CHAR1         Designated character delimiter (00: Not use / Other: Designated character)
    --rv timer            Inactivity timer value for TCP connection close
                            when there is no data exchange (0: Not use / 1~65535: timer value)
    --ra {0,1}            Keep-alive packet transmit enable for checking TCP connection established
    --rs number           Initial TCP keep-alive packet transmission interval value
                            (0: Not use / 1~65535: Initial Keep-alive packet transmission interval (Unit: millisecond))
    --re number           TCP Keep-alive packet transmission retry interval value
                            (0: Not use / 1~65535: Keep-alive packet transmission retry interval (Unit: millisecond))
    --rr number           TCP client reconnection interval value [TCP client only]
                            (0: Not use / 1~65535: TCP client reconnection interval (Unit: millisecond))
    --tr count            TCP Retransmisstion Retry count (1~255)

UART Command mode switch settings:

    --te {0,1}            Serial command mode switch code enable
    --ss 3-byte hex       Serial command mode switch code (default: 2B2B2B)

ETC options:

    --cp {0,1}            TCP connection password enable [TCP server mode only]
    --np pw               TCP connection password (string, up to 8 bytes / default: None) [TCP server mode only]
    --sp value            Search identification code (string, up to 8 bytes / default: None)
    --dg {0,1}            Serial debug message enable (Debug UART port)

Configuration from File:

    --setfile SETFILE     File name to Set
    --getfile GETFILE     File name to Get info. Refer default command(cmd_oneport.txt or cmd_twoport.txt).

Extention GPIO configurations (Digital out mode need value) (0: Digital in / 1: Digital Out(need value) / 2: Analog in):

    --ga [val [val ...]]  Expantion GPIO A config
    --gb [val [val ...]]  Expantion GPIO B config
    --gc [val [val ...]]  Expantion GPIO C config
    --gd [val [val ...]]  Expantion GPIO D config