Merge pull request #24 from jesserockz/ha/tag-scanned-action

Change to use the new tag_scanned action in ESPHome 1.15.2

README.md

@@ -35,8 +35,10 @@ Also make sure that you have set the switches on the PN532 to the following:
 
 This enables the PN532 module to communicate with the D1 over SPI, and is required for the modules to work together!
 
+To flash the reader firmware to your D1 Mini you point ESPHome at [tagreader.yaml](https://github.com/adonno/tagreader/blob/master/tagreader.yaml).  
+**The tag reader requires ESPHome 1.15.2 or later.**
 
-To flash the reader firmware to your D1 Mini you point ESPHome at [tagreader.yaml](https://github.com/adonno/tagreader/blob/master/tagreader.yaml). If you're new to ESPHome, we recommend that you use the [ESPHome Home Assistant add-on](https://esphome.io/guides/getting_started_hassio.html).
+If you're new to ESPHome, we recommend that you use the [ESPHome Home Assistant add-on](https://esphome.io/guides/getting_started_hassio.html).
 
 ![Open Case](https://raw.githubusercontent.com/adonno/tagreader/master/docs/open-case.jpg)
 

tagreader.yaml

@@ -80,10 +80,7 @@ pn532:
   # What happens when a tag is read
   on_tag:
     then:
-    - homeassistant.event:
-        event: esphome.tag_scanned
-        data:
-          tag_id: !lambda 'return x;'
+    - homeassistant.tag_scanned: !lambda 'return x;'
     - if:
         condition:
           switch.is_on: buzzer_enabled