Skip to content

Triple-channel power monitor based on INA3221 and TPS1HB08A with some filtering for tougher conditions. Compatible with Arduino Nano and Feathers.

License

Notifications You must be signed in to change notification settings

ahillbom/TougherPowerMonitor-HW

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

16 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

What is this?

Tougher INA3221 power meter 3D side view.

Power monitor with three channels, each capable of continuous 10A and 24V. It is compatible with both Arduino and Feather, and is based on a popular INA3221. The power monitor is more robust compared to other modules based on this IC. Each channel has proper RC filtering with TVS diodes to prevent INA3221 from being destroyed by transients, and to eliminate glitches. Pluggable screw terminals are rated for 15A, and can handle 12 to 30 AWG wires.

The third channel has a TPS1HB08A power switch, to be able to disconnect the load. The board can also provide power to the Feather or Arduino from the first channel via a built-in buck converter.

Block diagram

Tougher INA3221 Power Meter Block Diagram

Schematics

Tougher INA3221 Power Meter Schematics

Current sense resistor with RC filtering and TVS diodes.

Schematics of AP63205 buck converter.

Schematics of TPS1HB08 high-side power switch.

Assembled board

Assebmbled Tougher Power Meter (bottom view). Assebmbled Tougher Power Meter (side view).

About

Triple-channel power monitor based on INA3221 and TPS1HB08A with some filtering for tougher conditions. Compatible with Arduino Nano and Feathers.

Topics

Resources

License

Stars

Watchers

Forks

Packages

No packages published