Skip to content

Python library to connect to a Fronius Wattpilot Wallbox

License

Notifications You must be signed in to change notification settings

ahochsteger/wattpilot

 
 

Repository files navigation

Wattpilot

⚠️ This project is still in early development and might never leave this state

wattpilot is a Python 3 (>= 3.10) module to interact with Fronius Wattpilot wallboxes which do not support (at the time of writting) a documented API. This functionality of this module utilized a undocumented websockets API, which is also utilized by the official Wattpilot.Solar mobile app.

Wattpilot API Documentation

See API.md for the current state of the API documentation this implementation is based on.

It has been compiled from different sources, but primarily from:

Wattpilot Shell

The shell provides an easy way to explore the available properties and get or set their values.

# Install the wattpilot module, if not yet done so:
pip install .

Run the interactive shell

# Usage:
export WATTPILOT_HOST=<wattpilot_ip>
export WATTPILOT_PASSWORD=<password>
wattpilotshell
Welcome to the Wattpilot Shell 0.2.   Type help or ? to list commands.

wattpilot> help

Documented commands (type help <topic>):
========================================
EOF      exit  ha    info  properties  server  unwatch  watch
connect  get   help  mqtt  rawvalues   set     values 

The shell supports TAB-completion for all commands and their arguments. Detailed documentation can be found in ShellCommands.md.

It's also possible to pass a single command to the shell to integrate it into scripts:

# Usage:
wattpilotshell "<command> <args...>"

# Examples:
wattpilotshell "get amp"
wattpilotshell "set amp 6"

MQTT Bridge Support

It is possible to publish JSON messages received from Wattpilot and/or individual property value changes to an MQTT server. The easiest way to start the shell with MQTT support is using these environment variables:

export MQTT_ENABLED=true
export MQTT_HOST=<mqtt_host>
export WATTPILOT_HOST=<wattpilot_ip>
export WATTPILOT_PASSWORD=<wattpilot_password>
wattpilotshell

Pay attention to environment variables starting with MQTT_ to fine-tune the MQTT support (e.g. which messages or properties should published to MQTT topics).

MQTT support can be easily tested using mosquitto:

# Start mosquitto in a separate console:
mosquitto

# Subscribe to topics in a separate console:
mosquitto_sub -t 'wattpilot/#' -v

Home Assistant MQTT Discovery Support

To enable Home Assistant integration (using MQTT) set MQTT_ENABLED and HA_ENABLED to true and make sure to correctly configure the MQTT Integration. It provides auto-discovery of entities using property configuration from wattpilot.yaml. The is the simplest possible way to start the shell with HA support:

export MQTT_ENABLED=true
export HA_ENABLED=true
export MQTT_HOST=<mqtt_host>
export WATTPILOT_HOST=<wattpilot_ip>
export WATTPILOT_PASSWORD=<wattpilot_password>
wattpilotshell

Pay attention to environment variables starting with HA_ to fine-tune the Home Assistant integration (e.g. which properties should be exposed).

The discovery config published to MQTT can be tested using this in addition to the testing steps from MQTT above:

MQTT support can be easily tested using mosquitto:

# Subscribe to homeassisant topics in a separate console:
mosquitto_sub -t 'homeassistant/#' -v

Docker Support

The Docker images for the Wattpilot MQTT bridge with Home Assistant MQTT discovery can be found on GitHub Packages:

# Pull Image:
docker pull ghcr.io/joscha82/wattpilot:latest
# NOTE: Use the tag 'latest' for the latest release, a specific release version or 'main' for the current image of the not yet released main branch.

# Create .env file with environment variables:
cat .env
HA_ENABLED=true
MQTT_ENABLED=true
MQTT_HOST=<mqtt_host>
WATTPILOT_HOST=<wattpilot_ip>
WATTPILOT_PASSWORD=<my_secret_password>

# Run container (recommended with MQTT_ENABLED=true and HA_ENABLED=true - e.g. on a Raspberry Pi):
docker-compose up -d

To diagnose the hundreds of Wattpilot parameters the shell can be started this way (typically recommended with MQTT_ENABLED=false and HA_ENABLED=false on a local machine, in case a Docker container with MQTT support may be running permanently on e.g. a Raspberry Pi):

# Create .env file with environment variables:
cat .env
HA_ENABLED=false
MQTT_ENABLED=false
MQTT_HOST=<mqtt_host>
WATTPILOT_HOST=<wattpilot_ip>
WATTPILOT_PASSWORD=<my_secret_password>

# Run the shell:
docker-compose run wattpilot shell

Environment Variables

Environment Variable Description Default Value
HA_ENABLED Enable Home Assistant Discovery false
HA_PROPERTIES Only discover given properties (leave unset for all properties having homeAssistant set in wattpilot.yaml)
HA_TOPIC_CONFIG Topic pattern for HA discovery config homeassistant/{component}/{uniqueId}/config
HA_WAIT_INIT_S Wait initial number of seconds after starting discovery (in addition to wait time depending on the number of properties). May be increased, if entities in HA are not populated with values. 5
HA_WAIT_PROPS_MS Wait milliseconds per property after discovery before publishing property values. May be increased, if entities in HA are not populated with values. 50
MQTT_AVAILABLE_PAYLOAD Payload for the availability topic in case the MQTT bridge is online online
MQTT_CLIENT_ID MQTT client ID wattpilot2mqtt
MQTT_ENABLED Enable MQTT false
MQTT_HOST MQTT host to connect to
MQTT_MESSAGES List of space-separated message types to be published to MQTT (leave unset for all messages)
MQTT_NOT_AVAILABLE_PAYLOAD Payload for the availability topic in case the MQTT bridge is offline (last will message) offline
MQTT_PASSWORD Password for connecting to MQTT
MQTT_PORT Port of the MQTT host to connect to 1883
MQTT_PROPERTIES List of space-separated property names to publish changes for (leave unset for all properties)
MQTT_PUBLISH_MESSAGES Publish received Wattpilot messages to MQTT false
MQTT_PUBLISH_PROPERTIES Publish received property values to MQTT true
MQTT_TOPIC_AVAILABLE Topic pattern to publish Wattpilot availability status to {baseTopic}/available
MQTT_TOPIC_BASE Base topic for MQTT wattpilot
MQTT_TOPIC_MESSAGES Topic pattern to publish Wattpilot messages to {baseTopic}/messages/{messageType}
MQTT_TOPIC_PROPERTY_BASE Base topic for properties {baseTopic}/properties/{propName}
MQTT_TOPIC_PROPERTY_SET Topic pattern to listen for property value changes for ~/set
MQTT_TOPIC_PROPERTY_STATE Topic pattern to publish property values to ~/state
MQTT_USERNAME Username for connecting to MQTT
WATTPILOT_AUTOCONNECT Automatically connect to Wattpilot on startup true
WATTPILOT_AUTO_RECONNECT Automatically re-connect to Wattpilot on lost connections true
WATTPILOT_CONNECT_TIMEOUT Connect timeout for Wattpilot connection 30
WATTPILOT_HOST IP address of the Wattpilot device to connect to
WATTPILOT_INIT_TIMEOUT Wait timeout for property initialization 30
WATTPILOT_LOGLEVEL Log level (CRITICAL,ERROR,WARNING,INFO,DEBUG) INFO
WATTPILOT_PASSWORD Password for connecting to the Wattpilot device
WATTPILOT_RECONNECT_INTERVAL Waiting time in seconds before a lost connection is re-connected 30
WATTPILOT_SPLIT_PROPERTIES Whether compound properties (e.g. JSON arrays or objects) should be decomposed into separate properties true

HELP improving API definition in wattpilot.yaml

The MQTT and Home Assistant support heavily depends on the API definition in wattpilot.yaml which has been compiled from different sources and does not yet contain a full set of information for all relevant properties. See API.md for a generated documentation of the available data.

If you want to help, please have a look at the properties defined in wattpilot.yaml and fill in the missing pieces (e.g. title, description, rw, jsonType, childProps, homeAssistant, device_class, unit_of_measurement, enabled_by_default) to properties you care about. The file contains enough documentation and a lot of working examples to get you started.

About

Python library to connect to a Fronius Wattpilot Wallbox

Resources

License

Stars

Watchers

Forks

Packages

 
 
 

Languages

  • Python 94.4%
  • Shell 5.4%
  • Dockerfile 0.2%