🎉 Migrate BigCommerce Source Connector to Low Code (#29469)

Co-authored-by: sajarin <[email protected]>

airbyte-integrations/connectors/source-bigcommerce/.dockerignore

@@ -1,6 +1,5 @@
 *
 !Dockerfile
-!Dockerfile.test
 !main.py
 !source_bigcommerce
 !setup.py

airbyte-integrations/connectors/source-bigcommerce/Dockerfile

@@ -1,16 +1,38 @@
-FROM python:3.9-slim
+FROM python:3.9.11-alpine3.15 as base
+
+# build and load all requirements
+FROM base as builder
+WORKDIR /airbyte/integration_code
+
+# upgrade pip to the latest version
+RUN apk --no-cache upgrade \
+    && pip install --upgrade pip \
+    && apk --no-cache add tzdata build-base
 
-# Bash is installed for more convenient debugging.
-RUN apt-get update && apt-get install -y bash && rm -rf /var/lib/apt/lists/*
 
+COPY setup.py ./
+# install necessary packages to a temporary folder
+RUN pip install --prefix=/install .
+
+# build a clean environment
+FROM base
 WORKDIR /airbyte/integration_code
-COPY source_bigcommerce ./source_bigcommerce
+
+# copy all loaded and built libraries to a pure basic image
+COPY --from=builder /install /usr/local
+# add default timezone settings
+COPY --from=builder /usr/share/zoneinfo/Etc/UTC /etc/localtime
+RUN echo "Etc/UTC" > /etc/timezone
+
+# bash is installed for more convenient debugging.
+RUN apk --no-cache add bash
+
+# copy payload code only
 COPY main.py ./
-COPY setup.py ./
-RUN pip install .
+COPY source_bigcommerce ./source_bigcommerce
 
 ENV AIRBYTE_ENTRYPOINT "python /airbyte/integration_code/main.py"
 ENTRYPOINT ["python", "/airbyte/integration_code/main.py"]
 
-LABEL io.airbyte.version=0.1.10
+LABEL io.airbyte.version=0.2.0
 LABEL io.airbyte.name=airbyte/source-bigcommerce

airbyte-integrations/connectors/source-bigcommerce/README.md

@@ -1,34 +1,10 @@
 # Bigcommerce Source
 
-This is the repository for the Bigcommerce source connector, written in Python.
-For information about how to use this connector within Airbyte, see [the documentation](https://docs.airbyte.io/integrations/sources/bigcommerce).
+This is the repository for the Bigcommerce configuration based source connector.
+For information about how to use this connector within Airbyte, see [the documentation](https://docs.airbyte.com/integrations/sources/bigcommerce).
 
 ## Local development
 
-### Prerequisites
-**To iterate on this connector, make sure to complete this prerequisites section.**
-
-#### Minimum Python version required `= 3.9.0`
-
-#### Build & Activate Virtual Environment and install dependencies
-From this connector directory, create a virtual environment:
-```
-python -m venv .venv
-```
-
-This will generate a virtualenv for this module in `.venv/`. Make sure this venv is active in your
-development environment of choice. To activate it from the terminal, run:
-```
-source .venv/bin/activate
-pip install -r requirements.txt
-```
-If you are in an IDE, follow your IDE's instructions to activate the virtualenv.
-
-Note that while we are installing dependencies from `requirements.txt`, you should only edit `setup.py` for your dependencies. `requirements.txt` is
-used for editable installs (`pip install -e`) to pull in Python dependencies from the monorepo and will call `setup.py`.
-If this is mumbo jumbo to you, don't worry about it, just put your deps in `setup.py` but install using `pip install -r requirements.txt` and everything
-should work as you expect.
-
 #### Building via Gradle
 You can also build the connector in Gradle. This is typically used in CI and not needed for your development workflow.
 
@@ -38,22 +14,14 @@ To build using Gradle, from the Airbyte repository root, run:
 ```
 
 #### Create credentials
-**If you are a community contributor**, follow the instructions in the [documentation](https://docs.airbyte.io/integrations/sources/bigcommerce)
-to generate the necessary credentials. Then create a file `secrets/config.json` conforming to the `source_bigcommerce/spec.json` file.
+**If you are a community contributor**, follow the instructions in the [documentation](https://docs.airbyte.com/integrations/sources/bigcommerce)
+to generate the necessary credentials. Then create a file `secrets/config.json` conforming to the `source_bigcommerce/spec.yaml` file.
 Note that any directory named `secrets` is gitignored across the entire Airbyte repo, so there is no danger of accidentally checking in sensitive information.
 See `integration_tests/sample_config.json` for a sample config file.
 
 **If you are an Airbyte core member**, copy the credentials in Lastpass under the secret name `source bigcommerce test creds`
 and place them into `secrets/config.json`.
 
-### Locally running the connector
-```
-python main.py spec
-python main.py check --config secrets/config.json
-python main.py discover --config secrets/config.json
-python main.py read --config secrets/config.json --catalog integration_tests/configured_catalog.json
-```
-
 ### Locally running the connector docker image
 
 #### Build
@@ -78,32 +46,15 @@ docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-bigcommerce:dev discov
 docker run --rm -v $(pwd)/secrets:/secrets -v $(pwd)/integration_tests:/integration_tests airbyte/source-bigcommerce:dev read --config /secrets/config.json --catalog /integration_tests/configured_catalog.json
 ```
 ## Testing
-Make sure to familiarize yourself with [pytest test discovery](https://docs.pytest.org/en/latest/goodpractices.html#test-discovery) to know how your test files and methods should be named.
-First install test dependencies into your virtual environment:
-```
-pip install .[tests]
-```
-### Unit Tests
-To run unit tests locally, from the connector directory run:
-```
-python -m pytest unit_tests
-```
 
-### Integration Tests
-There are two types of integration tests: Acceptance Tests (Airbyte's test suite for all source connectors) and custom integration tests (which are specific to this connector).
-#### Custom Integration tests
-Place custom tests inside `integration_tests/` folder, then, from the connector root, run
-```
-python -m pytest integration_tests
-```
 #### Acceptance Tests
-Customize `acceptance-test-config.yml` file to configure tests. See [Connector Acceptance Tests](https://docs.airbyte.io/connector-development/testing-connectors/connector-acceptance-tests-reference) for more information.
+Customize `acceptance-test-config.yml` file to configure tests. See [Connector Acceptance Tests](https://docs.airbyte.com/connector-development/testing-connectors/connector-acceptance-tests-reference) for more information.
 If your connector requires to create or destroy resources for use during acceptance tests create fixtures for it and place them inside integration_tests/acceptance.py.
-To run your integration tests with acceptance tests, from the connector root, run
+
+To run your integration tests with Docker, run:
 ```
-python -m pytest integration_tests -p integration_tests.acceptance
+./acceptance-test-docker.sh
 ```
-To run your integration tests with docker
 
 ### Using gradle to run tests
 All commands should be run from airbyte project root.

airbyte-integrations/connectors/source-bigcommerce/unit_tests/unit_test.py → airbyte-integrations/connectors/source-bigcommerce/__init__.py

@@ -1,7 +1,3 @@
 #
 # Copyright (c) 2023 Airbyte, Inc., all rights reserved.
 #
-
-
-def test_example_method():
-    assert True

airbyte-integrations/connectors/source-bigcommerce/acceptance-test-config.yml

@@ -1,24 +1,47 @@
 # See [Connector Acceptance Tests](https://docs.airbyte.com/connector-development/testing-connectors/connector-acceptance-tests-reference)
 # for more information about how to configure these tests
 connector_image: airbyte/source-bigcommerce:dev
-tests:
+acceptance_tests:
   spec:
-    - spec_path: "source_bigcommerce/spec.json"
+    tests:
+      - spec_path: "source_bigcommerce/spec.yaml"
   connection:
-    - config_path: "secrets/config.json"
-      status: "succeed"
-    - config_path: "integration_tests/invalid_config.json"
-      status: "failed"
+    tests:
+      - config_path: "secrets/config.json"
+        status: "succeed"
+      - config_path: "integration_tests/invalid_config.json"
+        status: "failed"
   discovery:
-    - config_path: "secrets/config.json"
+    tests:
+      - config_path: "secrets/config.json"
+        backward_compatibility_tests_config:
+          disable_for_version: "0.1.10"
   basic_read:
-    - config_path: "secrets/config.json"
-      configured_catalog_path: "integration_tests/configured_catalog.json"
-      empty_streams: ["orders", "transactions", "products", "customers", "channels", "order_products"]
+    tests:
+      - config_path: "secrets/config.json"
+        configured_catalog_path: "integration_tests/configured_catalog.json"
+        empty_streams:
+          - name: "orders"
+            bypass_reason: "sandbox account does not have records"
+          - name: "transactions"
+            bypass_reason: "sandbox account does not have records"
+          - name: "products"
+            bypass_reason: "sandbox account does not have records"
+          - name: "customers"
+            bypass_reason: "sandbox account does not have records"
+          - name: "channels"
+            bypass_reason: "sandbox account does not have records"
+          - name: "order_products"
+            bypass_reason: "sandbox account does not have records"
+        fail_on_extra_columns: false
   incremental:
-    - config_path: "secrets/config.json"
-      configured_catalog_path: "integration_tests/configured_catalog.json"
-      future_state_path: "integration_tests/abnormal_state.json"
+    tests:
+      - config_path: "secrets/config.json"
+        configured_catalog_path: "integration_tests/configured_catalog.json"
+        future_state:
+          future_state_path: "integration_tests/abnormal_state.json"
+        skip_comprehensive_incremental_tests: true
   full_refresh:
-    - config_path: "secrets/config.json"
-      configured_catalog_path: "integration_tests/configured_catalog.json"
+    tests:
+      - config_path: "secrets/config.json"
+        configured_catalog_path: "integration_tests/configured_catalog.json"

airbyte-integrations/connectors/source-bigcommerce/acceptance-test-docker.sh

@@ -1,2 +1,3 @@
 #!/usr/bin/env sh
+
 source "$(git rev-parse --show-toplevel)/airbyte-integrations/bases/connector-acceptance-test/acceptance-test-docker.sh"

airbyte-integrations/connectors/source-bigcommerce/integration_tests/__init__.py

@@ -0,0 +1,3 @@
+#
+# Copyright (c) 2023 Airbyte, Inc., all rights reserved.
+#

airbyte-integrations/connectors/source-bigcommerce/integration_tests/abnormal_state.json

@@ -3,7 +3,7 @@
     "type": "STREAM",
     "stream": {
       "stream_state": {
-        "date_modified": "2080-07-30T22:16:46"
+        "date_modified": "2080-07-30T22:16:46+00:00"
       },
       "stream_descriptor": {
         "name": "customers"