Adds binary 1.1 read support for flex_uint, (annotate)

src/ion_data/ion_eq.rs

@@ -24,7 +24,7 @@ use std::ops::Deref;
 /// * Decimal `0.0` and `-0.0` are mathematically equivalent but not Ion equivalent.
 /// * Decimal `0.0` and `0.00` are mathematically equivalent but not Ion equivalent.
 /// * Timestamps representing the same point in time at different precisions or at different
-/// timezone offsets are not Ion equivalent.
+///   timezone offsets are not Ion equivalent.
 pub trait IonEq {
     fn ion_eq(&self, other: &Self) -> bool;
 }

src/ion_hash/type_qualifier.rs

@@ -18,7 +18,7 @@ pub(crate) struct TypeQualifier(u8);
 /// From the spec:
 ///
 /// > TQ: is a type qualifier octet consisting of a four-bit type code T
-/// followed by a four-bit qualifier Q
+/// > followed by a four-bit qualifier Q
 ///
 /// To compute a TQ from a `T` and a `Q`, all we need to is a bitwise shift!
 const fn combine(ion_type_code: IonTypeCode, q: u8) -> TypeQualifier {

src/lazy/binary/encoded_value.rs

@@ -1,5 +1,6 @@
 use crate::lazy::binary::raw::type_descriptor::Header;
 use crate::lazy::binary::raw::v1_1::immutable_buffer::AnnotationsEncoding;
+use crate::lazy::expanded::template::ParameterEncoding;
 use crate::IonType;
 use std::ops::Range;
 
@@ -40,6 +41,7 @@ impl EncodedHeader for Header {
 /// without re-parsing its header information each time.
 #[derive(Clone, Copy, Debug, PartialEq)]
 pub(crate) struct EncodedValue<HeaderType: EncodedHeader> {
+    pub(crate) encoding: ParameterEncoding,
     // If the compiler decides that a value is too large to be moved/copied with inline code,
     // it will relocate the value using memcpy instead. This can be quite slow by comparison.
     //
@@ -88,6 +90,8 @@ pub(crate) struct EncodedValue<HeaderType: EncodedHeader> {
     pub annotations_encoding: AnnotationsEncoding,
     // The offset of the type descriptor byte within the overall input stream.
     pub header_offset: usize,
+    // If this value was written with a tagless encoding, this will be 0. Otherwise, it's 1.
+    pub opcode_length: u8,
     // The number of bytes used to encode the optional length VarUInt following the header byte.
     pub length_length: u8,
     // The number of bytes used to encode the value itself, not including the header byte
@@ -258,12 +262,14 @@ mod tests {
     use crate::lazy::binary::encoded_value::EncodedValue;
     use crate::lazy::binary::raw::type_descriptor::Header;
     use crate::lazy::binary::raw::v1_1::immutable_buffer::AnnotationsEncoding;
+    use crate::lazy::expanded::template::ParameterEncoding;
     use crate::{IonResult, IonType};
 
     #[test]
     fn accessors() -> IonResult<()> {
         // 3-byte String with 1-byte annotation
         let value = EncodedValue {
+            encoding: ParameterEncoding::Tagged,
             header: Header {
                 ion_type: IonType::String,
                 ion_type_code: IonTypeCode::String,
@@ -273,6 +279,7 @@ mod tests {
             annotations_sequence_length: 1,
             annotations_encoding: AnnotationsEncoding::SymbolAddress,
             header_offset: 200,
+            opcode_length: 1,
             length_length: 0,
             value_body_length: 3,
             total_length: 7,

src/lazy/binary/immutable_buffer.rs

@@ -16,6 +16,7 @@ use crate::lazy::decoder::LazyRawFieldExpr;
 use crate::lazy::encoder::binary::v1_1::flex_int::FlexInt;
 use crate::lazy::encoder::binary::v1_1::flex_uint::FlexUInt;
 use crate::lazy::encoding::BinaryEncoding_1_0;
+use crate::lazy::expanded::template::ParameterEncoding;
 use crate::result::IonFailure;
 use crate::{Int, IonError, IonResult, IonType};
 
@@ -703,12 +704,14 @@ impl<'a> ImmutableBuffer<'a> {
         }
 
         let encoded_value = EncodedValue {
+            encoding: ParameterEncoding::Tagged,
             header,
             // If applicable, these are populated by the caller: `read_annotated_value()`
             annotations_header_length: 0,
             annotations_sequence_length: 0,
             annotations_encoding: AnnotationsEncoding::SymbolAddress,
             header_offset,
+            opcode_length: 1,
             length_length,
             value_body_length: value_length,
             total_length,

src/lazy/binary/raw/v1_1/e_expression.rs

@@ -272,7 +272,7 @@ impl<'top> Iterator for BinaryEExpArgsInputIter<'top> {
             // argument encoding bitmap.
             ArgGrouping::ValueExprLiteral
         };
-        // TODO: Tagless encodings
+        // TODO: More tagless encodings
         let (arg_expr, remaining_input) = match arg_grouping {
             // If the encoding is `empty`, there's nothing to do. Make an empty slice at the current
             // offset and build an empty BinaryEExpArgGroup with it.
@@ -282,14 +282,30 @@ impl<'top> Iterator for BinaryEExpArgsInputIter<'top> {
                 (EExpArg::new(parameter, expr), self.remaining_args_buffer)
             }
             // If it's a tagged value expression, parse it as usual.
-            ArgGrouping::ValueExprLiteral => {
-                let (expr, remaining) = try_or_some_err! {
-                    self
+            ArgGrouping::ValueExprLiteral => match parameter.encoding() {
+                ParameterEncoding::Tagged => {
+                    let (expr, remaining) = try_or_some_err! {
+                        self
                         .remaining_args_buffer
                         .expect_eexp_arg_expr("reading tagged e-expr arg")
-                };
-                (EExpArg::new(parameter, expr), remaining)
-            }
+                    };
+                    (EExpArg::new(parameter, expr), remaining)
+                }
+                ParameterEncoding::FlexUInt => {
+                    let (flex_uint_lazy_value, remaining) = try_or_some_err! {
+                        self.remaining_args_buffer.read_flex_uint_as_lazy_value()
+                    };
+                    let value_ref = &*self
+                        .remaining_args_buffer
+                        .context()
+                        .allocator()
+                        .alloc_with(|| flex_uint_lazy_value);
+                    (
+                        EExpArg::new(parameter, EExpArgExpr::ValueLiteral(value_ref)),
+                        remaining,
+                    )
+                }
+            },
             // If it's an argument group...
             ArgGrouping::ArgGroup => {
                 //...then it starts with a FlexUInt that indicates whether the group is length-prefixed

src/lazy/binary/raw/v1_1/immutable_buffer.rs

@@ -20,6 +20,7 @@ use crate::lazy::encoder::binary::v1_1::flex_int::FlexInt;
 use crate::lazy::encoder::binary::v1_1::flex_sym::FlexSym;
 use crate::lazy::encoder::binary::v1_1::flex_uint::FlexUInt;
 use crate::lazy::expanded::macro_table::MacroRef;
+use crate::lazy::expanded::template::ParameterEncoding;
 use crate::lazy::expanded::EncodingContextRef;
 use crate::lazy::text::raw::v1_1::arg_group::EExpArgExpr;
 use crate::result::IonFailure;
@@ -223,6 +224,38 @@ impl<'a> ImmutableBuffer<'a> {
         Ok((flex_uint, remaining))
     }
 
+    pub fn read_flex_uint_as_lazy_value(self) -> ParseResult<'a, LazyRawBinaryValue_1_1<'a>> {
+        let Some(first_byte) = self.peek_next_byte() else {
+            return IonResult::incomplete("a flex_uint", self.offset());
+        };
+        let size_in_bytes = match first_byte {
+            // If the first byte is zero, this flex_uint is encoded using 9+ bytes. That's pretty
+            // uncommon, so we'll just use the existing logic in the `read` method and discard the
+            // value. If this shows up in profiles, it can be optimized further.
+            0 => FlexUInt::read(self.bytes(), self.offset())?.size_in_bytes(),
+            _ => first_byte.trailing_zeros() as usize + 1,
+        };
+
+        if self.len() < size_in_bytes {
+            return IonResult::incomplete("reading a flex_uint value", self.offset());
+        }
+        // XXX: This *doesn't* slice `self` because FlexUInt::read() is faster if the input
+        //      is at least the size of a u64.
+        let matched_input = self;
+        let remaining_input = self.slice_to_end(size_in_bytes);
+        let value = LazyRawBinaryValue_1_1::for_flex_uint(matched_input);
+        Ok((value, remaining_input))
+    }
+
+    pub fn slice_to_end(&self, offset: usize) -> ImmutableBuffer<'a> {
+        ImmutableBuffer {
+            data: &self.data[offset..],
+            // stream offset + local offset
+            offset: self.offset + offset,
+            context: self.context,
+        }
+    }
+
     #[inline]
     pub fn read_flex_sym(self) -> ParseResult<'a, FlexSym<'a>> {
         let flex_sym = FlexSym::read(self.bytes(), self.offset())?;
@@ -448,12 +481,15 @@ impl<'a> ImmutableBuffer<'a> {
                 + value_length;
 
         let encoded_value = EncodedValue {
+            encoding: ParameterEncoding::Tagged,
             header,
             // If applicable, these are populated by the caller: `read_annotated_value()`
             annotations_header_length: 0,
             annotations_sequence_length: 0,
             annotations_encoding: AnnotationsEncoding::SymbolAddress,
             header_offset,
+            // This is a tagged value, so its opcode length is always 1
+            opcode_length: 1,
             length_length,
             value_body_length: value_length,
             total_length,

src/lazy/binary/raw/v1_1/value.rs

@@ -3,13 +3,16 @@
 use std::fmt::Debug;
 use std::ops::Range;
 
+use crate::lazy::binary::raw::v1_1::immutable_buffer::AnnotationsEncoding;
 use crate::lazy::binary::raw::v1_1::r#struct::LazyRawBinaryStruct_1_1;
 use crate::lazy::binary::raw::v1_1::sequence::{LazyRawBinaryList_1_1, LazyRawBinarySExp_1_1};
 use crate::lazy::bytes_ref::BytesRef;
 use crate::lazy::decoder::{HasRange, HasSpan, RawVersionMarker};
+use crate::lazy::expanded::template::ParameterEncoding;
 use crate::lazy::expanded::EncodingContextRef;
 use crate::lazy::span::Span;
 use crate::lazy::str_ref::StrRef;
+use crate::v1_1::FlexUInt;
 use crate::{
     lazy::{
         binary::{
@@ -132,6 +135,12 @@ impl<'top> LazyRawValue<'top, BinaryEncoding_1_1> for &'top LazyRawBinaryValue_1
     }
 
     fn read(&self) -> IonResult<RawValueRef<'top, BinaryEncoding_1_1>> {
+        if self.encoded_value.encoding == ParameterEncoding::FlexUInt {
+            let flex_uint = FlexUInt::read(self.input.bytes(), self.input.offset())?;
+            let int: Int = flex_uint.value().into();
+            return Ok(RawValueRef::Int(int));
+        }
+
         if self.is_null() {
             let ion_type = if self.encoded_value.header.ion_type_code == OpcodeType::TypedNull {
                 let body = self.value_body();
@@ -176,6 +185,11 @@ impl<'top> LazyRawValue<'top, BinaryEncoding_1_1> for &'top LazyRawBinaryValue_1
         &self,
         context: EncodingContextRef<'top>,
     ) -> IonResult<ValueRef<'top, BinaryEncoding_1_1>> {
+        if self.encoded_value.encoding == ParameterEncoding::FlexUInt {
+            let flex_uint = FlexUInt::read(self.input.bytes(), self.input.offset())?;
+            let int: Int = flex_uint.value().into();
+            return Ok(ValueRef::Int(int));
+        }
         if self.is_null() {
             return Ok(ValueRef::Null(self.ion_type()));
         }
@@ -194,6 +208,12 @@ impl<'top> LazyRawValue<'top, BinaryEncoding_1_1> for &'top LazyRawBinaryValue_1
             value: &'a LazyRawBinaryValue_1_1<'a>,
             context: EncodingContextRef<'a>,
         ) -> IonResult<ValueRef<'a, BinaryEncoding_1_1>> {
+            if value.encoded_value.encoding == ParameterEncoding::FlexUInt {
+                let flex_uint = FlexUInt::read(value.input.bytes(), value.input.offset())?;
+                let int: Int = flex_uint.value().into();
+                return Ok(ValueRef::Int(int));
+            }
+
             if value.is_null() {
                 return Ok(ValueRef::Null(value.ion_type()));
             }
@@ -246,6 +266,37 @@ impl<'top> LazyRawValue<'top, BinaryEncoding_1_1> for &'top LazyRawBinaryValue_1
 }
 
 impl<'top> LazyRawBinaryValue_1_1<'top> {
+    /// Constructs a lazy raw binary value from an input buffer slice that has been found to contain
+    /// a complete `FlexUInt`.
+    pub(crate) fn for_flex_uint(input: ImmutableBuffer<'top>) -> Self {
+        let encoded_value = EncodedValue {
+            encoding: ParameterEncoding::FlexUInt,
+            header: Header {
+                // It is an int, that's true.
+                ion_type: IonType::Int,
+                // Nonsense values for now
+                ion_type_code: OpcodeType::Nop,
+                low_nibble: 0,
+            },
+
+            // FlexUInts cannot have any annotations
+            annotations_header_length: 0,
+            annotations_sequence_length: 0,
+            annotations_encoding: AnnotationsEncoding::SymbolAddress,
+
+            header_offset: input.offset(),
+            opcode_length: 0,
+            length_length: 0,
+            value_body_length: input.len(),
+            total_length: input.len(),
+        };
+
+        LazyRawBinaryValue_1_1 {
+            encoded_value,
+            input,
+        }
+    }
+
     /// Indicates the Ion data type of this value. Calling this method does not require additional
     /// parsing of the input stream.
     pub fn ion_type(&'top self) -> IonType {

src/lazy/encoder/binary/v1_1/container_writers.rs

@@ -7,7 +7,7 @@ use crate::lazy::encoder::value_writer::internal::{FieldEncoder, MakeValueWriter
 use crate::lazy::encoder::value_writer::{EExpWriter, SequenceWriter, StructWriter};
 use crate::lazy::encoder::write_as_ion::WriteAsIon;
 use crate::raw_symbol_ref::AsRawSymbolRef;
-use crate::IonResult;
+use crate::{IonResult, UInt};
 
 /// A helper type that holds fields and logic that is common to [`BinaryListWriter_1_1`],
 /// [`BinarySExpWriter_1_1`], and [`BinaryStructWriter_1_1`].
@@ -393,4 +393,9 @@ impl<'value, 'top> SequenceWriter for BinaryEExpWriter_1_1<'value, 'top> {
     }
 }
 
-impl<'value, 'top> EExpWriter for BinaryEExpWriter_1_1<'value, 'top> {}
+impl<'value, 'top> EExpWriter for BinaryEExpWriter_1_1<'value, 'top> {
+    fn write_flex_uint(&mut self, value: impl Into<UInt>) -> IonResult<()> {
+        FlexUInt::write(self.buffer, value)?;
+        Ok(())
+    }
+}

src/lazy/encoder/binary/v1_1/flex_uint.rs

@@ -65,7 +65,6 @@ impl FlexUInt {
                 false,
             );
         }
-
         let flex_uint = Self::read_small_flex_uint(input);
         Ok(flex_uint)
     }
@@ -115,7 +114,7 @@ impl FlexUInt {
     /// (`support_sign_extension=true`), then the six bits beyond the supported 64 must all be the
     /// same as the 64th (highest supported) bit. This will allow encodings of up to 70 bits
     /// to be correctly interpreted as positive, negative, or beyond the bounds of the 64 bit
-    /// limitation.  
+    /// limitation.
     pub(crate) fn read_flex_primitive_as_uint(
         input: &[u8],
         offset: usize,

src/lazy/encoder/binary/v1_1/value_writer.rs

@@ -627,7 +627,7 @@ impl<'value, 'top> BinaryValueWriter_1_1<'value, 'top> {
             MacroIdRef::LocalAddress(_address) => {
                 todo!("macros with addresses higher than 64");
             }
-        }
+        };
         Ok(BinaryEExpWriter_1_1::new(
             self.allocator,
             self.encoding_buffer,
@@ -832,6 +832,9 @@ impl<'value, 'top> BinaryAnnotatedValueWriter_1_1<'value, 'top> {
 
 #[cfg(test)]
 mod tests {
+    use num_traits::FloatConst;
+    use rstest::rstest;
+
     use crate::ion_data::IonEq;
     use crate::lazy::encoder::annotate::{Annotatable, Annotated};
     use crate::lazy::encoder::annotation_seq::AnnotationSeq;
@@ -845,8 +848,6 @@ mod tests {
         v1_1, Decimal, Element, Int, IonResult, IonType, Null, RawSymbolRef, SymbolId, Timestamp,
         Writer,
     };
-    use num_traits::FloatConst;
-    use rstest::rstest;
 
     fn encoding_test(
         test: impl FnOnce(&mut LazyRawBinaryWriter_1_1<&mut Vec<u8>>) -> IonResult<()>,

src/lazy/encoder/value_writer.rs

@@ -3,7 +3,7 @@ use crate::lazy::encoder::value_writer::internal::{FieldEncoder, MakeValueWriter
 use crate::lazy::encoder::write_as_ion::WriteAsIon;
 use crate::lazy::text::raw::v1_1::reader::MacroIdRef;
 use crate::raw_symbol_ref::AsRawSymbolRef;
-use crate::{Decimal, Int, IonResult, IonType, RawSymbolRef, Timestamp};
+use crate::{Decimal, Int, IonResult, IonType, RawSymbolRef, Timestamp, UInt};
 
 pub mod internal {
     use crate::lazy::encoder::value_writer::ValueWriter;
@@ -32,7 +32,10 @@ pub mod internal {
 }
 
 pub trait EExpWriter: SequenceWriter {
-    // TODO: methods for writing tagless encodings
+    // TODO: more methods for writing tagless encodings
+    fn write_flex_uint(&mut self, _value: impl Into<UInt>) -> IonResult<()> {
+        todo!("current only implemented for binary 1.1 to enable unit testing for the reader")
+    }
 }
 
 pub trait AnnotatableWriter {

src/lazy/encoder/writer.rs

@@ -20,7 +20,7 @@ use crate::result::IonFailure;
 use crate::write_config::WriteConfig;
 use crate::{
     Decimal, Element, ElementWriter, Int, IonResult, IonType, RawSymbolRef, Symbol, SymbolId,
-    SymbolTable, Timestamp, Value,
+    SymbolTable, Timestamp, UInt, Value,
 };
 
 pub(crate) struct WriteContext {
@@ -505,6 +505,9 @@ impl<'value, V: ValueWriter> MakeValueWriter for ApplicationEExpWriter<'value, V
 
 impl<'value, V: ValueWriter> EExpWriter for ApplicationEExpWriter<'value, V> {
     // Default methods
+    fn write_flex_uint(&mut self, value: impl Into<UInt>) -> IonResult<()> {
+        self.raw_eexp_writer.write_flex_uint(value)
+    }
 }
 
 impl<S: SequenceWriter> ElementWriter for S {