-
Notifications
You must be signed in to change notification settings - Fork 34
Patton smartnode
daver360 edited this page Jan 20, 2014
·
5 revisions
Unter http://{IP-Gemeinschaft}/gs_parameters muss der Parameter send_ringing_to_gateways auf true gesetzt werden damit der Anrufende ein Freiton erhält.
Die Einstellungen werden direkt im GUI unter ab GS5.1.2 unter Gatewayeinstellungen gemacht:
Name | Value |
---|---|
domain | {IP-Adresse des Smartnode} |
register | false |
auth_source | sip_from_host |
auth_pattern | IP-Adresse des Smartnode |
number_source | sip_to_user |
Name | Value |
---|---|
send_ringing_to_gateways | true |
caller-id-in-from | true |
Hängt von der Konfiguration der Patton ab!!
Var in | Var out | Pattern | Replacement | Action | Mandatory |
---|---|---|---|---|---|
val:caller_id_numbers | caller_id_number | ^+49(%d+)$ | 0%1 | set | true |
Im Beispiel wurde ein SmartNode 4638 mit der Softwareversion R5.2 2009-01-14 H323 SIP BRI verwendet.
#----------------------------------------------------------------# # # # SN4638/5BIS # # R5.2 2009-01-14 H323 SIP BRI # # 2013-04-04T09:50:47 # # SN/xxxxxxxxxxxx # # Generated configuration file # # # #----------------------------------------------------------------# cli version 3.20 dns-client server {dns-IP} dns-client server {dns2-IP} dns-relay webserver port 80 language en sntp-client sntp-client server primary 129.132.2.21 port 123 version 4 system ic voice 0 low-bitrate-codec g729 system clock-source 1 bri 0 0 clock-source 2 bri 0 1 clock-source 3 bri 0 2 clock-source 4 bri 0 3 clock-source 5 bri 0 4 profile napt NAPT_WAN profile ppp default profile tone-set default profile voip default codec 1 g711alaw64k rx-length 20 tx-length 20 codec 2 g711ulaw64k rx-length 20 tx-length 20 profile pstn default profile sip default profile aaa default method 1 local method 2 none context ip router interface WAN ipaddress dhcp use profile napt NAPT_WAN tcp adjust-mss rx mtu tcp adjust-mss tx mtu interface LAN ipaddress {IP-Adresse Patton} 255.255.255.0 tcp adjust-mss rx mtu tcp adjust-mss tx mtu context ip router route 0.0.0.0 0.0.0.0 {Gateway-IP} 0 context cs switch routing-table calling-e164 RT_CALLED interface isdn IF_TE_00 route call dest-interface IF_SIP_ASTERISK dtmf-dialing interface isdn IF_TE_01 route call dest-interface IF_SIP_ASTERISK dtmf-dialing interface isdn IF_TE_02 route call dest-interface IF_SIP_ASTERISK dtmf-dialing interface isdn IF_TE_03 route call dest-interface IF_SIP_ASTERISK interface isdn IF_TE_04 interface sip IF_SIP_ASTERISK bind context sip-gateway Gemeinschaft route call dest-interface IF_TE_00 remote {IP-Adresse Gemeinschaft} 5060 context cs switch no shutdown context sip-gateway Gemeinschaft interface IF_GW_LAN bind interface LAN context router port 5060 context sip-gateway Gemeinschaft no shutdown port ethernet 0 0 medium auto encapsulation ip bind interface WAN router no shutdown port ethernet 0 1 medium auto encapsulation ip bind interface LAN router no shutdown port bri 0 0 clock auto encapsulation q921 q921 protocol pp uni-side auto encapsulation q931 q931 protocol dss1 uni-side user bchan-number-order ascending encapsulation cc-isdn bind interface IF_TE_00 switch port bri 0 0 no shutdown port bri 0 1 clock auto encapsulation q921 q921 protocol pp uni-side auto encapsulation q931 q931 protocol dss1 uni-side user bchan-number-order ascending encapsulation cc-isdn bind interface IF_TE_01 switch port bri 0 1 no shutdown port bri 0 2 clock auto encapsulation q921 q921 protocol pp uni-side auto encapsulation q931 q931 protocol dss1 uni-side user bchan-number-order ascending encapsulation cc-isdn bind interface IF_TE_02 switch port bri 0 2 no shutdown port bri 0 3 clock auto encapsulation q921 q921 protocol pp uni-side auto encapsulation q931 q931 protocol dss1 uni-side user bchan-number-order ascending encapsulation cc-isdn bind interface IF_TE_03 switch port bri 0 3 no shutdown port bri 0 4 clock auto encapsulation q921 q921 uni-side auto encapsulation q931 q931 protocol dss1 uni-side net bchan-number-order ascending port bri 0 4 shutdown
Important: The Tables of Content are generated. Any change will be overridden on the next update.
For more information: GitHub Wikifier
Proxysetting not working at all ... we could not change the Proxy by itself