update v1.34 - v2.0 in several places

Signed-off-by: arezaii <[email protected]>

CMakeLists.txt

@@ -35,8 +35,8 @@ set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
 # Handle all (most?) the versioning information in one place
 # These values will be written to <build_dir>/frontend/include/chpl/config/config.h
 
-set(CHPL_MAJOR_VERSION 1)
-set(CHPL_MINOR_VERSION 34)
+set(CHPL_MAJOR_VERSION 2)
+set(CHPL_MINOR_VERSION 0)
 set(CHPL_PATCH_VERSION 0)
 set(CHPL_BUILD_VERSION 0)
 

doc/rst/language/evolution.rst

@@ -14,15 +14,15 @@ The purpose of this flag is to identify portions of a program that use a
 language or library feature has recently changed meaning or which is
 expected to change meaning in the future.
 
-version 1.34, March 2024
+version 2.0, March 2024
 ------------------------
 
 .. _readme-evolution.default-task-intent-arrays:
 
 Default task intents for arrays
 *******************************
 
-In 1.34, the default task intent for an array is now determined by the outer
+In 2.0, the default task intent for an array is now determined by the outer
 variable. If the outer array is ``const`` then the default intent is ``const``,
 otherwise the default intent is ``ref``. Therefore, if an array is modifiable
 outside a parallel block, it is modifiable inside the parallel block. It is no
@@ -44,8 +44,8 @@ The default task intent for ``A`` is ``ref``, since the argument formal ``A``
 is mutable. This simplifies parallel code, making it simpler and cleaner to
 write.
 
-Prior to 1.34, the above ``begin`` would have resulted in a deprecation
-warning. In 1.34, this is valid code again.
+Prior to 2.0, the above ``begin`` would have resulted in a deprecation
+warning. In 2.0, this is valid code again.
 
 version 1.32, September 2023
 ----------------------------

doc/rst/technotes/driver.rst

@@ -21,7 +21,7 @@ subprocesses depending on which backend is used. By contrast, many compiler
 executables (including ``gcc`` and ``clang``) are actually `compiler drivers`.
 A compiler driver is a smaller program responsible for processing arguments and
 invoking separate processes for the different stages of compilation required. As
-of release 1.34, ``chpl`` runs as a compiler driver by default, with the
+of release 2.0, ``chpl`` runs as a compiler driver by default, with the
 following phases run as separate subprocesses:
 
 - ``compilation``: Everything through code generation (C code or LLVM bitcode).
@@ -82,7 +82,7 @@ Development History
   phases: `compilation`, which is responsible for everything through code
   generation (C code or LLVM bitcode), and `makeBinary`, which is responsible
   for binary generation (including linking).
-- In release 1.34, the driver mode is on by default, and the
+- In release 2.0, the driver mode is on by default, and the
   ``--compiler-driver`` flag is unstable. The new unstable
   ``--no-compiler-driver`` flag allows opting out of the driver mode and will
   cause the compiler to run monolithically as before. Both flags will be removed

doc/rst/technotes/ioSerializers.rst

@@ -50,7 +50,7 @@ serialization and deserialization.
 In Chapel 1.32, Serializers and Deserializers are enabled by default. Users
 wishing to opt-out of this capability can recompile their programs with
 the config param ``useIOSerializers`` set to ``false``. This config param
-will be available through the Chapel 1.34 release at minimum.
+will be available through the Chapel 2.0 release at minimum.
 
 API Changes to Standard IO
 --------------------------

frontend/lib/uast/post-parse-checks.cpp

@@ -691,7 +691,7 @@ void Visitor::checkSparseKeyword(const FnCall* node) {
                " their behavior is likely to change in the future.");
 }
 
-// TODO: remove this check and warning after 1.34?
+// TODO: remove this check and warning after 2.0?
 void Visitor::checkPrimCallInUserCode(const PrimCall* node) {
   // suppress this warning from chpldoc
   if (isUserCode())
@@ -1648,7 +1648,7 @@ void Visitor::checkOtherwiseAfterWhens(const Select* sel) {
     if (seenOtherwise && !when->isOtherwise()) {
       CHPL_REPORT(context_, WhenAfterOtherwise, sel, seenOtherwise, when);
       break;
-    } 
+    }
     if (when->isOtherwise())  seenOtherwise = when;
   }
 }

man/confchpl.rst

@@ -1,5 +1,5 @@
 
-:Version: 1.34.0 pre-release 
+:Version: 2.0.0 pre-release
 :Manual section: 1
 :Title: \\fBchpl\\fP
 :Subtitle: Compiler for the Chapel Programming Language

man/confchpldoc.rst

@@ -1,5 +1,5 @@
 
-:Version: 1.34.0 pre-release
+:Version: 2.0.0 pre-release
 :Manual section: 1
 :Title: \\fBchpldoc\\fP
 :Subtitle: the Chapel Documentation Tool

test/compflags/bradc/printstuff/version.goodstart

@@ -1 +1 @@
- version 1.34.0
+ version 2.0.0

test/deprecated/chplCommGetPut.chpl

@@ -1,7 +1,7 @@
 /*
  Test to make sure we do/don't warn about the changed behavior (depending on
  if using chpl or chpldoc) in these primitives from v1.31 to v1.32.
- Should remove when we stop warning about the change, likely with v1.34.
+ Should remove when we stop warning about the change.
 */
 
 inline proc GET(addr, node, rAddr, size) {

test/mason/chplVersion/tomls/pass/ivrsChooses.good

@@ -10,18 +10,18 @@ version = "0.1.0"
 chplVersion = "CHPL_CUR_FULL..CHPL_CUR_FULL"
 name = "badThenGood"
 source = "foo"
-version = "0.2.0"
+version = "0.3.0"
 
 [usesBad]
 chplVersion = "CHPL_CUR_FULL..CHPL_CUR_FULL"
-dependencies = ["badThenGood 0.2.0 foo"]
+dependencies = ["badThenGood 0.3.0 foo"]
 name = "usesBad"
 source = "foo"
 version = "0.1.0"
 
 [usesGood]
 chplVersion = "CHPL_CUR_FULL..CHPL_CUR_FULL"
-dependencies = ["badThenGood 0.2.0 foo"]
+dependencies = ["badThenGood 0.3.0 foo"]
 name = "usesGood"
 source = "foo"
 version = "0.1.0"