This is a P8X32A/Propeller, P2X8C4M64P/Propeller 2 driver object for Silicon Labs Si446x-series transceivers
IMPORTANT: This software is meant to be used with the spin-standard-library (P8X32A) or p2-spin-standard-library (P2X8C4M64P). Please install the applicable library first before attempting to use this code, otherwise you will be missing several files required to build the project.
- SPI connection at up to 1MHz (P1), TBD (P2)
- Set common RF parameters: carrier frequency, TX bitrate, modulation (2/4FSK, GFSK, 2/4GFSK, OOK, and CW for TX testing), frequency deviation
- Supports on-air bit rates from 100bps to 1Mbps
- Options for increasing transmission robustness: Syncword, preamble
- Supports setting preamble length
P1/SPIN1:
- spin-standard-library
- P1: 1 extra core/cog for the PASM SPI driver
P2/SPIN2:
- p2-spin-standard-library
- P1/SPIN1: OpenSpin (tested with 1.00.81)
- P2/SPIN2: FastSpin (tested with 4.1.10-beta)
BST(incompatible - no preprocessor)Propeller Tool(incompatible - no preprocessor)PNut(incompatible - no preprocessor)
- Very early in development - may malfunction or outright fail to build
- No working TX or RX code yet
- Get CarrierFreq working
- Verify simple transmission