Skip to content

balancer/linear-pools

Repository files navigation

Balancer V2 Linear Pool Integrations

Docs License

This repo contains smart contract implementations of all known Linear Pool factories on Balancer. Contributions are welcome!

IMPORTANT: Before developing your own factory, ensure that your yield-bearing token is truly incompatible with existing solutions. In most cases, unique factories are not required to support forks of existing integrations (e.g., Aave v2). Furthermore, yield vaults implementing the ERC-4626 standard can leverage that factory and will not require bespoke solutions.

For more information about Boosted Pools and Linear Pools, please consult the official documentation.

Components of a Linear Pool Integration

Each implementation should include the components below.

LinearPool

The Linear Pool contract defines how the exchange rate is calculated. This is the most critical component because it determines the price of each swap within the Pool.

NOTE: All external calls within the _getWrappedTokenRate function should include try/catch blocks and utilize the ExternalCallLib to prevent manipulation by nefarious tokens.

Unit Tests

At a minimum, the unit tests for each Linear Pool should verify the following assumptions:

  1. There is strict relationship between a mainToken and wrappedToken is respected (e.g., cDAI is not paired with USDC).
  2. Asset Managers are set correctly.
  3. The token rate is calculated correctly and is normalized to 1e18 regardless of mainToken or wrappedToken decimals.
  4. Malicious queries (that manipulate the token rate) are reverted.

LinearPoolFactory

The Linear Pool Factory contract is responsible for creating new Linear Pools.

Unit Tests

At a minimum, the unit tests for each Linear Pool Factory should verify the following assumptions:

  1. A Pool can be created and its constituent tokens are registered in the Vault.
  2. The Factory version and Pool version are set correctly.
  3. An Asset Manager is created and configured for each Pool.

LinearPoolRebalancer

The Linear Pool Rebalancer contract is a helper to enable efficient, capital-free arbitrage and maintain the target balance of mainToken within the Pool.

It doesn't have unit tests. The logic of the Rebalancer is instead verified using fork tests, since it is very sensitive to the wrappedToken implementation.

Protocol Interface(s)

In order to implement a Linear Pool for a given yield protocol, we need to understand the following features of that protocol:

  • Can the exchange rate between the mainToken and wrappedToken be queried directly, and is the return value up to date?
    • If not, how can we calculate the exchange rate?
  • How is mainToken deposited to the protocol?
  • How is wrappedToken redeemed, or mainToken withdrawn, from the protocol?
  • How many decimals does the wrappedToken have? Is it at all related to the mainToken decimals, or is it fixed?

These questions will define which interfaces need to be declared. Some protocols expose all of this via the token contract itself, whereas others perform some or all operations via a central protocol vault.

Mocked Contracts

In order to properly unit test Linear Pool contracts, mocked token contracts need to be implemented. These can be found inside the __mocks__ directory.

Fork Tests

Fork tests are also essential because they act on real token contracts rather than mocks. The Rebalancer, especially, requires precision in order to function correctly, so it is safest to verify it on a real protocol token.

Fork tests can be found inside pkg/fork-tests, and their implementation is described in the next section.

How-To Guide

  1. Clone this repository to your machine. Ensure that you have nodejs installed and that your version is at least 14.x (preferably 16.x). Run yarn && yarn build to begin, and troubleshoot any errors you encounter before moving forward.

  2. Create a copy of pkg/linear-pools/contracts/erc4626-linear-pool, and change the name to match your protocol's name (e.g., pkg/linear-pools/contracts/<YOUR_PROTOCOL>-linear-pool)

  3. Change the names of all files accordingly, e.g., ERC4626LinearPool.sol, ERC4626LinearPoolFactory.sol, ERC4626LinearPoolRebalancer.sol, and all corresponding test files.

  4. Within each file, change the names of variables and classes to suit your protocol's name.

  5. Inside <YOUR_PROTOCOL>LinearPool.sol, adapt the _getWrappedTokenRate function to your protocol. Make sure to wrap any external calls in try/catch blocks and utilize the ExternalCallLib.

    1. NOTE: During this step, you'll probably need to define an interface for the token/vault of the protocol, especially the function pertaining to the exchange rate.
  6. Inside <YOUR_PROTOCOL>LinearPoolRebalancer.sol, define the _wrapTokens (deposit), _unwrapTokens (redeem), and _getRequiredTokensToWrap (given an amount of wrappedToken, how many mainToken do I need?) functions.

    1. IMPORTANT: _getRequiredTokensToWrap also uses the token rate, so make sure that _getWrappedTokenRate and _getRequiredTokensToWrap use the same source to fetch the token rate.
    2. IMPORTANT: During this step, the interface created in Step 4 will need to be expanded to include withdraw/deposit functions.
  7. Edit the setup section within your Linear Pool test file to make sure you're deploying and testing the correct Linear Pool. Do not delete any tests from the copied file, since many tests apply to all kinds of Linear Pools and protocols.

    1. NOTE: setup deploys a mocked version of the token, so you'll also need to implement a mock. If your protocol uses a central vault contract as well, check the AaveLinearPool tests for examples.
  8. Run yarn test and make sure the Linear Pool tests pass.

  9. Edit the Linear Pool Factory test file (especially beforeEach('deploy factory & tokens')) to adapt to your protocol. You don't need to change the Protocol ID right now.

  10. Run yarn test and make sure the Linear Pool Rebalancer tests pass.

  11. To begin fork testing, navigate to pkg/fork-tests/tests, duplicate the ERC-4626 test folder, and change the name to your protocol. Make sure the number in the folder matches the YYYYMMDD pattern.

  12. Delete the output directory and the contents of build-info.

  13. Adapt index.ts, input.ts, and readme.md to your protocol name.

  14. Open pkg/linear-pools and run yarn hardhat compile. Once the contracts are compiled, open the artifacts/build-info directory and copy the json inside this file to pkg/fork-tests/tests/YYYYMMDD-<YOUR-PROTOCOL>-linear-pool/build-info.

  15. Inside your test folder, open test.fork.ts and adapt it to your protocol. Make sure that you're using a recent block number, token addresses are correctly defined, and your chosen token holder has a large balance at that block number.

  16. Go to pkg/fork-tests and run yarn test. Make sure your tests are passing.