chore: Update mainnet gas limit from 132M->144M (#217)

* chore: Update gas limit from 132M->144M * Add execution record
base-org · Oct 2, 2024 · 72581a7 · 72581a7
1 parent 76aa974
commit 72581a7
Show file tree

Hide file tree

Showing 5 changed files with 438 additions and 0 deletions.
diff --git a/mainnet/2024-10-01-increase-gas-limit/.env b/mainnet/2024-10-01-increase-gas-limit/.env
@@ -0,0 +1,8 @@
+OP_COMMIT=9047beb54c66a5c572784efec8984f259302ec92
+BASE_CONTRACTS_COMMIT=6df77b49e16c2da29d1530b624eb6df4ff00cb2e
+
+L1_SYSTEM_CONFIG_ADDRESS=0x73a79Fab69143498Ed3712e519A88a918e1f4072
+SYSTEM_CONFIG_OWNER=0x14536667Cd30e52C0b458BaACcB9faDA7046E056
+
+OLD_GAS_LIMIT=132000000
+NEW_GAS_LIMIT=144000000
diff --git a/mainnet/2024-10-01-increase-gas-limit/Makefile b/mainnet/2024-10-01-increase-gas-limit/Makefile
@@ -0,0 +1,31 @@
+include ../../Makefile
+include ../.env
+include .env
+
+ifndef LEDGER_ACCOUNT
+override LEDGER_ACCOUNT = 0
+endif
+
+.PHONY: sign-upgrade
+sign-upgrade: 
+	$(GOPATH)/bin/eip712sign --ledger --hd-paths "m/44'/60'/$(LEDGER_ACCOUNT)'/0/0" -- \
+	forge script --rpc-url $(L1_RPC_URL) lib/base-contracts/script/deploy/l1/UpgradeGasLimit.sol \
+	--sig "sign()"
+
+.PHONY: execute-upgrade
+execute-upgrade:
+	forge script --rpc-url $(L1_RPC_URL) lib/base-contracts/script/deploy/l1/UpgradeGasLimit.sol \
+	--sig "run(bytes)" $(SIGNATURES) --ledger --hd-paths "m/44'/60'/$(LEDGER_ACCOUNT)'/0/0" --broadcast
+
+
+.PHONY: sign-rollback
+sign-rollback: 
+	$(GOPATH)/bin/eip712sign --ledger --hd-paths "m/44'/60'/$(LEDGER_ACCOUNT)'/0/0" -- \
+	forge script --rpc-url $(L1_RPC_URL) lib/base-contracts/script/deploy/l1/RollbackGasLimit.sol \
+	--sig "sign()"
+
+
+.PHONY: execute-rollback
+execute-rollback:
+	forge script --rpc-url $(L1_RPC_URL) lib/base-contracts/script/deploy/l1/RollbackGasLimit.sol \
+	--sig "run(bytes)" $(SIGNATURES) --ledger --hd-paths "m/44'/60'/$(LEDGER_ACCOUNT)'/0/0" --broadcast
diff --git a/mainnet/2024-10-01-increase-gas-limit/README.md b/mainnet/2024-10-01-increase-gas-limit/README.md
@@ -0,0 +1,292 @@
+# Update Gas Limit in L1 `SystemConfig` 
+
+Status: DONE
+
+## Objective
+
+We are updating the gas limit to improve TPS and reduce gas fees. 
+
+This runbook invokes two scripts which allow our signers to sign two different calls for our Incident Multisig, which are both defined in the [base-org/contracts](https://github.com/base-org/contracts) repository:
+1. `UpgradeGasLimit` -- This script will update the gas limit to our new limit of 144M gas
+2. `RollbackGasLimit` -- This script establishes a rollback call in the case we need to revert to  gas
+
+The values we are sending are statically defined in the `.env`.
+
+> [!IMPORTANT] We have two transactions to sign. Please follow 
+> the flow for both "Approving the Update transaction" and 
+> "Approving the Rollback transaction". Hopefully we only need
+> the former, but will have the latter available if needed. 
+
+## Approving the Upgrade transaction
+
+### 1. Update repo and move to the appropriate folder:
+```
+cd contract-deployments
+git pull
+cd mainnet/2024-09-23-increase-gas-limit
+make deps
+```
+
+### 2. Setup Ledger
+
+Your Ledger needs to be connected and unlocked. The Ethereum
+application needs to be opened on Ledger with the message "Application
+is ready".
+
+### 3. Simulate and validate the transaction
+
+Make sure your ledger is still unlocked and run the following.
+
+``` shell
+make sign-upgrade
+```
+
+Once you run the `make sign...` command successfully, you will see a "Simulation link" from the output.
+
+Paste this URL in your browser. A prompt may ask you to choose a
+project, any project will do. You can create one if necessary.
+
+Click "Simulate Transaction".
+
+We will be performing 3 validations and then we'll extract the domain hash and
+message hash to approve on your Ledger then verify completion:
+
+1. Validate integrity of the simulation.
+2. Validate correctness of the state diff.
+3. Validate and extract domain hash and message hash to approve.
+
+
+#### 3.1. Validate integrity of the simulation.
+
+Make sure you are on the "Overview" tab of the tenderly simulation, to
+validate integrity of the simulation, we need to check the following:
+
+1. "Network": Check the network is Ethereum Mainnet.
+2. "Timestamp": Check the simulation is performed on a block with a
+   recent timestamp (i.e. close to when you run the script).
+3. "Sender": Check the address shown is your signer account. If not,
+   you will need to determine which “number” it is in the list of
+   addresses on your ledger.
+4. "Success" with a green check mark 
+
+
+#### 3.2. Validate correctness of the state diff.
+
+Now click on the "State" tab. Verify that:
+
+1. Verify that the nonce is incremented for the Incident Multisig under the "GnosisSafeProxy" at address `0x14536667Cd30e52C0b458BaACcB9faDA7046E056`. We should see the nonce increment from 32 to 33:
+
+```
+Key: 0x0000000000000000000000000000000000000000000000000000000000000005
+Before: 0x0000000000000000000000000000000000000000000000000000000000000020
+After: 0x00000000000000000000000000000000000000000000000000000000000000021
+```
+
+2. Verify that gas limit value is appropriately updated under "Proxy" at address `0x73a79fab69143498ed3712e519a88a918e1f4072`. We should see that the gas limit has been changed from 132M to 144M:
+
+```
+Key: 0x0000000000000000000000000000000000000000000000000000000000000068
+Before: 0x0000000000000000000000000000000000000000000000000000000007DE2900
+After: 0x0000000000000000000000000000000000000000000000000000000008954400
+```
+
+#### 3.3. Extract the domain hash and the message hash to approve.
+
+Now that we have verified the transaction performs the right
+operation, we need to extract the domain hash and the message hash to
+approve.
+
+Go back to the "Overview" tab, and find the
+`GnosisSafe.checkSignatures` call. This call's `data` parameter
+contains both the domain hash and the message hash that will show up
+in your Ledger.
+
+Here is an example screenshot. Note that the value will be
+different for each signer:
+
+![Screenshot 2024-03-07 at 5 49 02 PM](https://github.com/base-org/contract-deployments/assets/84420280/1b7905f1-1350-4634-a804-7b4458d0ddc9)
+
+
+It will be a concatenation of `0x1901`, the domain hash, and the
+message hash: `0x1901[domain hash][message hash]`.
+
+Note down this value. You will need to compare it with the ones
+displayed on the Ledger screen at signing.
+
+### 4. Approve the signature on your ledger
+
+Once the validations are done, it's time to actually sign the
+transaction. Make sure your ledger is still unlocked and run the
+following:
+
+``` shell
+make sign-upgrade
+```
+
+> [!IMPORTANT] This is the most security critical part of the
+> playbook: make sure the domain hash and message hash in the
+> following two places match:
+
+1. on your Ledger screen.
+2. in the Tenderly simulation. You should use the same Tenderly
+   simulation as the one you used to verify the state diffs, instead
+   of opening the new one printed in the console.
+
+There is no need to verify anything printed in the console. There is
+no need to open the new Tenderly simulation link either.
+
+After verification, sign the transaction. You will see the `Data`,
+`Signer` and `Signature` printed in the console. Format should be
+something like this:
+
+```
+Data:  <DATA>
+Signer: <ADDRESS>
+Signature: <SIGNATURE>
+```
+
+Double check the signer address is the right one.
+
+### 5. Send the output to Facilitator(s)
+
+Nothing has occurred onchain - these are offchain signatures which
+will be collected by Facilitators for execution. Execution can occur
+by anyone once a threshold of signatures are collected, so a
+Facilitator will do the final execution for convenience.
+
+Share the `Data`, `Signer` and `Signature` with the Facilitator, and
+congrats, you are done!
+
+
+## Approving the Rollback transaction
+
+Complete the above steps for `Approving the Update transaction` before continuing below.
+
+### 1. Simulate and validate the transaction
+
+Make sure your ledger is still unlocked and run the following.
+``` shell
+make sign-rollback
+```
+Once you run the make sign command successfully, you will see a "Simulation link" from the output. Once again paste this URL in your browser and click "Simulate Transaction".
+
+We will be performing 3 validations and then we'll extract the domain hash and
+message hash to approve on your Ledger then verify completion:
+
+1. Validate integrity of the simulation.
+2. Validate correctness of the state diff.
+3. Validate and extract domain hash and message hash to approve.
+4. Validate that the transaction completed successfully
+
+
+#### 3.1. Validate integrity of the simulation.
+
+Make sure you are on the "Overview" tab of the tenderly simulation, to
+validate integrity of the simulation, we need to check the following:
+
+1. "Network": Check the network is Ethereum Mainnet.
+2. "Timestamp": Check the simulation is performed on a block with a
+   recent timestamp (i.e. close to when you run the script).
+3. "Sender": Check the address shown is your signer account. If not,
+   you will need to determine which “number” it is in the list of
+   addresses on your ledger.
+4. "Success" with a green check mark 
+
+
+#### 3.2. Validate correctness of the state diff.
+
+Now click on the "State" tab. Verify that:
+
+1. Verify that the nonce is incremented for the Incident Multisig under the "GnosisSafeProxy" at address `0x14536667Cd30e52C0b458BaACcB9faDA7046E056`:
+
+```
+Key: 0x0000000000000000000000000000000000000000000000000000000000000005
+Before: 0x00000000000000000000000000000000000000000000000000000000000000021
+After: 0x00000000000000000000000000000000000000000000000000000000000000022
+```
+
+2. Verify that gas limit value is appropriately updated under "Proxy" at address `0x73a79fab69143498ed3712e519a88a918e1f4072`:
+
+```
+Key: 0x0000000000000000000000000000000000000000000000000000000000000068
+Before: 0x0000000000000000000000000000000000000000000000000000000008954400
+After: 0x0000000000000000000000000000000000000000000000000000000007DE2900
+```
+
+#### 3.3. Extract the domain hash and the message hash to approve.
+
+Now that we have verified the transaction performs the right
+operation, we need to extract the domain hash and the message hash to
+approve.
+
+Go back to the "Overview" tab, and find the
+`GnosisSafe.checkSignatures` call. This call's `data` parameter
+contains both the domain hash and the message hash that will show up
+in your Ledger.
+
+Here is an example screenshot. Note that the value will be
+different for each signer:
+
+![Screenshot 2024-03-07 at 5 49 32 PM](https://github.com/base-org/contract-deployments/assets/84420280/b6b5817f-0d05-4862-b16a-4f7f5f18f036)
+
+It will be a concatenation of `0x1901`, the domain hash, and the
+message hash: `0x1901[domain hash][message hash]`.
+
+Note down this value. You will need to compare it with the ones
+displayed on the Ledger screen at signing.
+
+### 4. Approve the signature on your ledger
+
+Once the validations are done, it's time to actually sign the
+transaction. Make sure your ledger is still unlocked and run the
+following:
+
+``` shell
+make sign-rollback
+```
+
+> [!IMPORTANT] This is the most security critical part of the
+> playbook: make sure the domain hash and message hash in the
+> following two places match:
+
+1. on your Ledger screen.
+2. in the Tenderly simulation. You should use the same Tenderly
+   simulation as the one you used to verify the state diffs, instead
+   of opening the new one printed in the console.
+
+There is no need to verify anything printed in the console. There is
+no need to open the new Tenderly simulation link either.
+
+After verification, sign the transaction. You will see the `Data`,
+`Signer` and `Signature` printed in the console. Format should be
+something like this:
+
+```
+Data:  <DATA>
+Signer: <ADDRESS>
+Signature: <SIGNATURE>
+```
+
+Double check the signer address is the right one.
+
+### 5. Send the output to Facilitator(s)
+
+Nothing has occurred onchain - these are offchain signatures which
+will be collected by Facilitators for execution. Execution can occur
+by anyone once a threshold of signatures are collected, so a
+Facilitator will do the final execution for convenience.
+
+Share the `Data`, `Signer` and `Signature` with the Facilitator, and
+congrats, you are done!
+
+## Execute the output
+
+1. Collect outputs from all participating signers.
+2. Concatenate all signatures and export it as the `SIGNATURES`
+   environment variable, i.e. `export
+   SIGNATURES="0x[SIGNATURE1][SIGNATURE2]..."`.
+3. Run `make execute-upgrade`
+
+> [!IMPORTANT] IN THE EVENT WE NEED TO PERFORM ROLLBACK
+> Repeat the above, but replace the signatures with the signed
+> rollback signatures collected, the call `make execute-rollback`
diff --git a/mainnet/2024-10-01-increase-gas-limit/foundry.toml b/mainnet/2024-10-01-increase-gas-limit/foundry.toml
@@ -0,0 +1,20 @@
+[profile.default]
+src = 'src'
+out = 'out'
+libs = ['lib']
+broadcast = 'records'
+fs_permissions = [ {access = "read-write", path = "./"} ]
+optimizer = true
+optimizer_runs = 999999
+solc_version = "0.8.15"
+via-ir = true
+remappings = [
+    '@eth-optimism-bedrock/=lib/optimism/packages/contracts-bedrock/',
+    '@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts',
+    '@openzeppelin/contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/contracts',
+    '@rari-capital/solmate/=lib/solmate/',
+    '@base-contracts/=lib/base-contracts',
+    '@solady/=lib/solady/src/'
+]
+
+# See more config options https://github.com/foundry-rs/foundry/tree/master/config