You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.
$ sudo apt install binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev make4.1+ perl python3.6+ rsync subversion unzip which libncurses5-dev zlib1g-dev gawk gcc-multilib g++-multilib flex git-core gettext libssl-dev ocaml sharutils re2c -y
And This development tools requires Python 3.6 or higher! Please use the following command to check,
$ python3 --version
Python 3.6.13
$ ls -l /usr/bin/python3*
/usr/bin/python3 -> python3.6
/usr/bin/python3.5
/usr/bin/python3.5-config -> x86_64-linux-gnu-python3.5-config
/usr/bin/python3.5m
/usr/bin/python3.5m-config -> x86_64-linux-gnu-python3.5m-config
/usr/bin/python3.6
/usr/bin/python3.6-config -> x86_64-linux-gnu-python3.6-config
/usr/bin/python3.6m
/usr/bin/python3.6m-config -> x86_64-linux-gnu-python3.6m-config
/usr/bin/python3.9
/usr/bin/python3.9-config -> x86_64-linux-gnu-python3.9-config
/usr/bin/python3-config -> python3.5-config
/usr/bin/python3m -> python3.5m
/usr/bin/python3m-config -> python3.5m-config
-
Run
git clone https://github.com/gl-inet/gl-infra-builder.git && cd gl-infra-builder
to clone repository -
Run
ls configs -hl
to list the openwrt verizon -
Chose your want version, for example, if you want to use openwrt-21.02.2, Run
python3 setup.py -c configs/config-21.02.2.yml
to download openwrt-21.02.2 source code -
Run
cd openwrt-21.02/openwrt-21.02.2
to enter openwrt-21.02.2 directory -
Run
./scripts/gen_config.py list
to get target_xxx and glinet_xxx files. target_xxx is you want to compile products, don't modify. glinet_xxx is you want to add/delete packages, you can modify. Those files in the profiles directory. -
Run
./scripts/gen_config.py <target_profile> <function_profile>
to chose the product target and add some packages. <target_profile> is you want to compile products. <function_profile> is you want to add/delete packages. -
For example, If you want to compile GL-A1300 product and add luci, you can run
./scripts/gen_config.py target_ipq40xx_gl-a1300 luci
. You can runmake menuconfig
to chose other packages -
Run
make
to build your firmware.
-
Base on the steps above, at openwrt-21.02/openwrt-21.02.2 directory, run
git clone https://github.com/gl-inet/glinet4.x.git
to get GL.iNet packages. -
Run
./scripts/gen_config.py target_ipq40xx_gl-a1300 glinet_depends
to add A1300 GL.iNet packages -
Run
make V=s -j5 GL_PKGDIR=
pwd/glinet4.x/ipq40xx/
to compile GL.iNet standard firmware.
1.1 Compile MT2500 OpenWrt firmware(No GL.iNet packages)
git clone https://github.com/gl-inet/gl-infra-builder.git && cd gl-infra-builder
python3 setup.py -c configs/config-mt798x-7.6.6.1.yml && cd mt7981
./scripts/gen_config.py target_mt7981_gl-mt2500 luci
make V=s -j5
1.2 Compile MT2500 GL.iNet standard firmware
git clone https://github.com/gl-inet/glinet4.x.git
cp ./glinet4.x/pkg_config/gl_pkg_config_mt7981_mt2500.mk ./glinet4.x/mt7981/gl_pkg_config.mk
./scripts/gen_config.py target_mt7981_gl-mt2500 glinet_depends
make V=s -j5 GL_PKGDIR=`pwd`/glinet4.x/mt7981/
2.1 Compile MT3000 OpenWrt firmware(No GL.iNet packages)
git clone https://github.com/gl-inet/gl-infra-builder.git && cd gl-infra-builder
python3 setup.py -c configs/config-mt798x-7.6.6.1.yml && cd mt7981
./scripts/gen_config.py target_mt7981_gl-mt3000 luci
make V=s -j5
2.2 Compile MT3000 GL.iNet standard firmware(Base on the steps above)
git clone https://github.com/gl-inet/glinet4.x.git
cp ./glinet4.x/pkg_config/gl_pkg_config_mt7981_mt3000.mk ./glinet4.x/mt7981/gl_pkg_config.mk
./scripts/gen_config.py target_mt7981_gl-mt3000 glinet_depends
make -j5 V=s GL_PKGDIR=`pwd`/glinet4.x/mt7981/
3.1 Compile AXT1800 OpenWrt firmware(No GL.iNet packages)
git clone https://github.com/gl-inet/gl-infra-builder.git && cd gl-infra-builder
python3 setup.py -c configs/config-wlan-ap.yml && cd wlan-ap/openwrt
./scripts/gen_config.py target_wlan_ap-gl-axt1800 luci
make V=s -j5
3.2 Compile AXT1800 GL.iNet standard firmware(Base on the steps above)
git clone https://github.com/gl-inet/glinet4.x.git
./scripts/gen_config.py target_wlan_ap-gl-axt1800 glinet_depends
make V=s -j5 GL_PKGDIR=`pwd`/glinet4.x/ipq60xx/
4.1 Compile AX1800 OpenWrt firmware(No GL.iNet packages)
git clone https://github.com/gl-inet/gl-infra-builder.git && cd gl-infra-builder
python3 setup.py -c configs/config-wlan-ap.yml && cd wlan-ap/openwrt
./scripts/gen_config.py target_wlan_ap-gl-ax1800 luci
make V=s -j5
4.2 Compile AX1800 GL.iNet standard firmware
git clone https://github.com/gl-inet/glinet4.x.git
./scripts/gen_config.py target_wlan_ap-gl-ax1800 glinet_depends
make V=s -j5 GL_PKGDIR=`pwd`/glinet4.x/ipq60xx/
5.1 Compile A1300 OpenWrt firmware(No GL.iNet packages)
git clone https://github.com/gl-inet/gl-infra-builder.git && cd gl-infra-builder
python3 setup.py -c configs/config-21.02.2.yml && cd openwrt-21.02/openwrt-21.02.2
./scripts/gen_config.py target_ipq40xx_gl-a1300 luci
make V=s -j5
5.2 Compile A1300 GL.iNet standard firmware
git clone https://github.com/gl-inet/glinet4.x.git
./scripts/gen_config.py target_ipq40xx_gl-a1300 glinet_depends
make V=s -j5 GL_PKGDIR=`pwd`/glinet4.x/ipq40xx/
git clone https://github.com/gl-inet/gl-infra-builder.git && cd gl-infra-builder
python3 setup.py -c config-siflower-18.x.yml && cd openwrt-18.06/siflower/openwrt-18.06
./scripts/gen_config.py target_siflower_gl-sft1200 luci
make V=s -j5
4.1 Compile S200 OpenWrt firmware(No GL.iNet packages)
git clone https://github.com/gl-inet/gl-infra-builder.git && cd gl-infra-builder
python3 setup.py -c configs/config-21.02.2.yml && cd openwrt-21.02/openwrt-21.02.2
./scripts/gen_config.py target_ath79_gl-s200 luci
make V=s -j5
4.2 Compile S200 GL.iNet standard firmware
git clone https://github.com/gl-inet/glinet4.x.git
./scripts/gen_config.py target_ath79_gl-s200 glinet_depends_s200
make V=s -j5 GL_PKGDIR=`pwd`/glinet4.x/ath79/
- If you gcc version is 10, you will encounter some error, like this:
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
collect2: error:ld returned 1 exit status.
You should execute the following command to reduce the gcc version:
$ update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-9 100
$ update-alternatives --config gcc