Reordering

configs/SEQUREH7V2/config.h

@@ -18,13 +18,9 @@
  *
  * If not, see <http://www.gnu.org/licenses/>.
  */
-
-
 #pragma once
 
-
 #define FC_TARGET_MCU STM32H743
-
 #define BOARD_NAME SEQUREH7V2
 #define MANUFACTURER_ID SQRE
 
@@ -126,31 +122,27 @@
 #define TIMUP4_DMA_OPT      0
 #define TIMUP8_DMA_OPT      0
 
-#define DEFAULT_DSHOT_BURST DSHOT_DMAR_ON
+#define ADC_INSTANCE ADC1
 
 #define SERIALRX_UART SERIAL_PORT_USART1
 #define GPS_UART SERIAL_PORT_USART6
 #define MSP_DISPLAYPORT_UART SERIAL_PORT_USART7
 #define ESC_SENSOR_UART SERIAL_PORT_USART8
 
-#define MAG_I2C_INSTANCE (I2CDEV_1)
-#define BARO_I2C_INSTANCE (I2CDEV_1)
+#define BARO_I2C_INSTANCE I2CDEV_1
+#define MAG_I2C_INSTANCE I2CDEV_1
 
-#define ADC_INSTANCE ADC1
+#define FLASH_SPI_INSTANCE SPI3
+#define GYRO_1_SPI_INSTANCE SPI2
+#define MAX7456_SPI_INSTANCE SPI1
 
+#define DEFAULT_DSHOT_BURST DSHOT_DMAR_ON
 #define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH
-
 #define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC
 #define DEFAULT_CURRENT_METER_SCALE 1052
-
 #define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC
 #define DEFAULT_VOLTAGE_METER_SCALE 110
 
 #define BEEPER_INVERTED
 
-#define MAX7456_SPI_INSTANCE SPI1
-
-#define GYRO_1_SPI_INSTANCE SPI2
 #define GYRO_1_ALIGN CW90_DEG
-
-#define FLASH_SPI_INSTANCE SPI3