This Module establishes an connection with Mediornet Devices from Riedel such es (Mediornet Compact, Modular or microN). You must have EmBER+ enabled in the 3rd Party Interfaces. Later select the IP-Address of the master device. For further information download the 3rd Party Interfaces manual from the Riedel website (restricted access for users).
This Plugin supports Mediorworks Verision 7.4.0
Execute yarn command to install the dependencies.
The module can be built once with yarn build. This should be enough to get the module to be loadable by companion.
While developing the module, by using yarn build:watch the compiler will be run in watch mode to recompile the files on change.
Please enter:
- IP-Address
- Auto-Take
- InputCount
- OutputCount
EmBER+ Port is 9000 by specification from Riedel.
Enter the IP Address of the main Mediornet Device
When enabled, a source is routed to the selected destination immediatly.
Reset Source and Target after Take action.
For offline Programming, you can give a wanted amount of in-/outputs to give you access to all variables and dropdown menues. This value is internally overwritten, when a connection is established.
- Implement FSY activation
- Implement Colorbar activation
- make Feedback- and Actionlist shorter and add matrix in those fields instead (needs companion support)
- enable interaction with Mediornet Timers
- lock state of destinations