Installing operating system images
https://www.raspberrypi.org/documentation/installation/installing-images/README.md
Mount the boot partition of the SD card
sudo diskutil mount /dev/disk2s1
You'll have to locate the boot directory, on my Mac it's in /Volumes/.
In the boot directory, create an empty file called ssh.
touch ssh
If this file exists, ssh will be enabled when the pi is booted.
Use a text editor to open up the config.txt file that is in the boot directory. Go to the bottom and add dtoverlay=dwc2as the last line.
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
dtoverlay=dwc2
Then open up cmdline.txt After rootwait (the last word on the first line) add a space and then modules-load=dwc2,g_ether
dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=PARTUUID=ee25660b-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait modules-load=dwc2,g_ether quiet init=/usr/lib/raspi-config/init_resize.sh
Plug in a MicroUSB cable from your Pi Zero's USB port to your computer. then SSH in to raspberrypi.local and execute the bash command
sudo cp /etc/wpa_supplicant/wpa_supplicant.conf /etc/wpa_supplicant/wpa_supplicant.conf.origin
sudo sh -c "wpa_passphrase YOUR_WIFI_SSID >> /etc/wpa_supplicant/wpa_supplicant.conf"
sudo sed -i "1icountry=CN" /etc/wpa_supplicant/wpa_supplicant.conf
Reboot the ZERO PI. And then clone this repo
sudo apt-get update
sudo apt-get install git
git clone https://github.com/codemeow5/ss_over_zero_pi.git
sudo apt-get install python-pip
sudo pip install Flask
Paste FLASK_DEBUG=1 /usr/bin/nohup /usr/bin/python /home/pi/ss_over_zero_pi/webadmin.py > /home/pi/webadmin.log 2>&1 & to /etc/rc.local.
Then execute the command
sudo chmod u+x /home/pi/ss_over_zero_pi/shadowsocks_nat_install.sh
sudo /home/pi/ss_over_zero_pi/shadowsocks_nat_install.sh
Install shadowsocks-libev and configure iptables.
Plug in a MicroUSB cable from your Pi Zero's USB port to your computer. And then access http://raspberrypi.local/ from your browser.
Configure WiFi. Reboot Pi and configure your iPhone.